Nicro-Fico 1169 Traveller


NF 1169 Traveller Track
*Nicro-Fico 1 1/4" I-Beam Track x 3': NF 1169-3:* *Nicro-Fico 1 1/4" I-Beam Track x 5': NF 1169-5:* *Nicro-Fico 1 1/4" I-Beam Track x 6': NF 1169-6:* *Nicro-Fico 1 1/4" I-Beam Track x 8': NF 1169-8:* *Nicro-Fico 1 1/4" I-Beam Track x 20': NF 1169-20:* *Nicro-Fico 1 1/4" I-Beam Track - Custom Length: NF 1169 -__ft.:* NF 1169 Traveller track is a Black hardcote anodized Aluminum I-Beam Track that measures 1 1/4" (32mm) across the top and bottom, and is 1 5/16" (33mm) high. Track is drilled for 1/4" FH screws on 100mm (3 7/8") centers, and has 7/16" diameter stop holes on 100mm centers. NF 1169 I-Beam Track is available in several standard lengths, and custom lengths up to 20 feet.
*Nicro-Fico 1 1/4" I-Beam Track, Curved x 5 feet: NF 1169-60MC3:*
Special, Curved NF 1169 Traveller track is 5' (1.55M) long with a 3" Vertical bend. As used by O'Day, and others. #
*Nicro-Fico 1 1/4" I-Beam Track, Curved x 5' 8 3/8": NF 1169-68MC3.3:*
Special, Curved NF 1169 Traveller track is 5' 8 3/8" (1.73M) long with a 3 3/8" Vertical bend. As used by O'Day, and others. #

NF 1169 Traveller Cars
*Basic 4-wheel Traveller Car: NF 1165:* Basic Traveller Car for NF 1169 I-Beam Track is constructed of aluminum alloy with captive SS ball-bearing wheels, and eyestrap (with holes on 1 3/4" centers) for attachment to mainsheet block. Car is 3" long with a maximum width of 2 3/8", and has an ultimate tensile strength of 5000 lbs..
*4-wheel Traveller Car w/ 2 Control Sheaves: NF 1167:* As NF 1165 (above), but with 2 control sheaves for 3/8" line. Provides a 2-1 control purchase.
*4-wheel Traveller Car w/ 2 Control Sheaves & Beckets: NF 1162:* As NF 1167 (above), but features top plate with SS ferules for attachment of control lines. Provides a 3-1 control purchase.
*4-wheel Traveller Car w/ 4 Control Sheaves: NF 1164:* As NF 1167 (above), but with 4 Control sheaves. Provides a 4-1 purchase.
*4-wheel Traveller Car w/ 4 Control Sheaves & Beckets: NF 1164B:* As NF 1162 (above), but with 4 Control sheaves. Provides a 4-1, or 5-1 purchase.
*4-wheel Traveller Car w/ Control Sheaves & Cam Cleats: NF 1168:* As NF 1167 (above), but with the addition of SS cam plate and 2 cam cleats. Provides 2-1 purchase with car-mounted cam cleats.
*4-wheel Traveller Car w/ Control Sheaves, Cam Cleats & Beckets: NF 1168B:*
As NF 1168 (above), but features top plate with SS ferules for attachment of control lines. Provides 3-1 purchase with car-mounted cam cleats.
*Basic 6-wheel Traveller Car: NF 1390:* Basic Six-wheel Traveller Car for NF 1169 I-Beam Track is constructed of aluminum alloy with captive SS ball-bearing wheels, and SS triangular channel with 1/2" clevis pin for attachment to mainsheet block. Car is 5" long with a maximum width of 2 3/8", and has an ultimate tensile strength of 7000 lbs..
*6-wheel Traveller Car w/ 2 Control Sheaves & Beckets: NF 1391:* Identical to NF 1390 (above), but with 2 control sheaves for 3/8" line. SS channel has 1/4" clevis pins for control line attachment. Provides for a 2-1 or 3-1 control purchase.
*6-wheel Traveller Car w/ 4 Control Sheaves: NF 1392:* As NF 1390 (above), but with 4 control sheaves. For use with 4-1 purchase systems.
*6-wheel Traveller Car w/ 4 Ball Bearing Control Sheaves: NF 1393:* Six-wheel Traveller Car features 4, large diameter (2"), Ball bearing control sheaves. For use with 4-1 purchase systems. *This item is no longer available - Use NF 1392, above.
*Basic 8-wheel Traveller Car: NF 1219:* Basic Eight-wheel Traveller Car for NF 1169 I-Beam Track is made from (2) NF 1165, 4-wheel car bodies, joined with a SS triangular channel. This arrangement allows both car halves to articulate separately and avoids uneven loading when used on curved tracks. SS clevis pin (1/2") through triangular channel allows for use with any mainsheet block. Car is 6 1/2" long with a maximum width of 2 3/8", and has an ultimate tensile strength of 9000 lbs..
*8-wheel Traveller Car w/ 2 Control Sheaves & Beckets: NF 1223:* As NF 1219 (above), but with 2 control sheaves for 3/8" line. SS channel has 1/4" clevis pins for control line attachment. Provides for a 2-1 or 3-1 control purchase.
*8-wheel Traveller Car w/ 4 Control Sheaves: NF 1249:* As NF 1219 (above), but with 4 control sheaves. For use with 4-1 purchase systems.
*8-wheel Traveller Car w/ 4 Ball Bearing Control Sheaves: NF 1394:* Eight-wheel Traveller Car features 4, large diameter (2"), Ball bearing control sheaves. For use with 4-1 purchase systems. *This item is no longer available - Use NF 1249, above.
*Basic 16-wheel Traveller Car: NF 1220-16A:* Basic Sixteen-wheel Traveller Car for NF 1169 I-Beam Track is made from (2) NF 1219, 8-wheel Traveller Cars, connected with a special link plate, NF 1220. Includes a 1/2" shackle for attachment to mainsheet block(s), and 1/4" clevis Pins for attachment of Control lines or blocks. Car is 13 1/2" long with a maximum width of 2 3/8", and has an ultimate tensile strength of 18,000 lbs..

NF 1169 Traveller Car Parts
*Replacement Sheave only, for NF 1169 Cars: NF 73-7:* Molded Delrin sheave is 1 1/8" OD x 9/16" (.565") wide x 7/16" ID. As used on NF 1169 4-wheel Traveller Cars, and in other applications. With rope groove for maximum 7/16" (11mm) line.
*Replacement Sheave only, for NF 1169 Cars: NF 1167S-7:* Delrin sheave is 1 1/2" OD x 9/16" wide x 7/16" ID. As used on NF 1169 6-wheel and 8-wheel Traveller Cars, and in other applications. With rope groove for maximum 7/16" (11mm) line. 5505D&F
*Replacement Sheave only, for NF 1169 Cars: NF 1167S:* Delrin sheave is 1 1/2" OD x 9/16" wide x 1/2" ID. As used on NF 1169 6-wheel and 8-wheel Traveller Cars, and in other applications. With rope groove for maximum 7/16" (11mm) line. 05-8F
*Eyestrap for Traveller Car: NF 1051:* Heavy formed SS eyestrap for use on all NF 1169 4-wheel Traveller Cars. Eyestrap is (maximum) 2 3/8" long and has attachment holes for (2) 5/16" bolts on 1 3/4" hole centers.
*Top/Center Plate: NF 1160:* SS Top/Center plate is used on 4-wheel Cars as the center Plate (4 Sheave Cars), and Top Plate (Cars without Beckets). Plate is 3" long x 1 1/8" wide, and has (2) holes for 5/16" bolts on 1 3/4" hole centers.
*Top Plate with Beckets: NF 1161:* Formed black anodized aluminum top plate has SS ferules for attachment of control lines. Plate is 4 7/8" long x 1 1/2" (maximum) wide, and has (2) attachment holes for 5/16" bolts on 1 3/4" hole centers. As used on NF 1162, and NF 1164 4-wheel Traveller Cars.
	*Top Plate w/ Beckets & 18' Spliced Lines: NF 1161-18A:* Top Plate, NF1161, above, with 2 pieces of 3/8" line x 18' spliced on to the Beckets. Suitable for use with all NF 1169 4-wheel Traveller Cars.
	*Top Plate w/ Beckets & 23' Spliced Lines: NF 1161-23A:* Top Plate, NF1161, above, with 2 pieces of 3/8" line x 23' spliced on to the Beckets. Suitable for use with all NF 1169 4-wheel Traveller Cars.
	*Top Plate w/ Beckets & 30' Spliced Lines: NF 1161-30A:* Formed black anodized aluminum top plate has SS ferules for attachment of control lines. Top Plate, NF1161, has 2 pieces of 3/8" line x 30' spliced on to the Beckets. Suitable for use with all NF 1169 4-wheel Traveller Cars.
*Triangular Channel Plate w/ 1/2" Clevis Pin & Beckets: NF 1219CT:* Formed SS triangular channel has SS clevis pin (1/2") for attachment of any mainsheet block, and (2) 1/4" clevis pins for control line attachment. SS Channel Plate is 4 3/8" long x 1 1/4" wide, and has (2) 7/16" attachment holes on 3 3/8" hole centers. As used on all NF 1169 6-wheel & 8-wheel Traveller Cars.
*4-Wheel Car Conversion Kit 3-1: NF 1165-K3:* Kit includes all materials to convert Basic 4-wheel Car (NF 1165) to NF 1162 Car with 2 control sheaves. Includes top plate (NF 1161), 2 sheaves, 2 bushings, 2 (5/16") bolts and locknuts. Provides for a 2-1 or 3-1 control purchase.
*4-Wheel Car Conversion Kit 4-1: NF 1165-K4:* Kit includes all materials to convert Basic 4-wheel Car (NF 1165) to NF 1164 Car with 4 control sheaves. Includes top plate, center plate, 4 sheaves, 4 bushings, 2 bolts and locknuts. Provides for a 4-1 control purchase.
*4-Wheel Car Conversion Kit 5-1: NF 1165-K5:* Kit includes all materials to convert Basic 4-wheel Car (NF 1165) to NF 1164B Car with 4 control sheaves and Beckets. Includes top plate (NF 1161), center plate, 4 sheaves, 4 bushings, 2 bolts and locknuts. Provides for a 4-1 or 5-1 control purchase.
*4-Wheel Car Conversion Kit 2-1 to 4-1: NF 1162-K2:* Kit includes all materials necessary to convert any 4-wheel Car with 2 sheaves (NF 1167 or NF 1162) to a 4-sheave car. Includes center plate, 2 sheaves, 2 bushings, 2 bolts and locknuts. This kit adds a 2-part purchase, and will convert any 2-1 purchase Car to a 4-1 Car, or any 3-1 Car to a 5-1 Car.
6-Wheel Car Conversion Kit 3-1: NF 1390-K2: Kit includes all materials to convert Basic 6-wheel Car (NF 1390) to NF 1391 Car with 2 control sheaves. Includes 2 sheaves, 2 bushings, 2 (5/16") bolts and locknuts. Provides for a 2-1 or 3-1 control purchase. .62bu 1.5
6-Wheel Car Conversion Kit 5-1: NF 1390-K4: Kit includes all materials to convert Basic 6-wheel Car (NF 1390) to NF 1392 Car with 4 control sheaves. Includes center plate, 4 sheaves, 4 bushings, 2 (5/16") bolts and locknuts. Provides for a 4-1 or 5-1 control purchase. 2.25b
8-Wheel Car Conversion Kit 3-1: NF 1219-K2: Kit includes all materials to convert Basic 8-wheel Car (NF 1219) to NF 1223 Car with 2 control sheaves. Includes bottom plate, 2 sheaves, 2 bushings, 2 (5/16") bolts and locknuts, and 2 nylon washers. Provides for a 2-1 or 3-1 control purchase. 1.75b
8-Wheel Car Conversion Kit 5-1: NF 1219-K4: Kit includes all materials to convert Basic 8-wheel Car (NF 1219) to NF 1249 Car with 4 control sheaves. Includes bottom plate, center plate, 4 sheaves, 4 bushings, 2 (5/16") bolts and locknuts, and 2 nylon washers. Provides for a 4-1 or 5-1 control purchase. 2.5b
16-Wheel Car Link Plate w/ Shackle: NF 1220: Special link plate used on Sixteen-wheel Traveller Car, *NF 1220-16A,* to connect (2) *NF 1219* 8-wheel Cars together. Link plate is 8" long x 2 1/8" high with (2) 1/2" holes for attachment to Cars, and includes a 1/2" shackle for attachment to mainsheet block(s).

NF 1169 Traveller Ends & Stops
*Plastic Track End Stop: NF 1176:* Hard molded plastic Track End for NF 1169 Track covers track end and attaches to deck with (1) #10 (3/16") FH screw. Extends 1 1/2" beyond track.
*Adjustable Track Stop: NF 1177:* Adjustable Track Stop for NF 1169 Track features SS Spring Pin and rubber bumpers, NF 1177R (included), to cushion car impact. Used on free-floating car systems without end controls, especially for jib and staysail boom Travellers. Aluminum Track Stop is (maximum) 2 3/8" long x 2" wide.
	*Replacement Bumper: NF 1177R:* Replacement Rubber Bumpers for NF 1177 Adjustable Track Stop are 2 3/8" long.

NF 1169 Traveller Control Ends Control Ends for Travellers come in 2 configurations, those that mount on the Track itself, and those that mount on the deck adjacent to the end of the track. In cockpits, it is also common to use blocks mounted on the cockpit sides for controls. Control Ends are available in a variety of configurations for different purchases with or without cam cleats. Track-mount Control Ends are available with or without cam cleats and beckets for 2-1, 3-1, or 4-1 purchase systems. Please note that all NF 1169 SS Track-mount Control Ends are compatible with standard US (1 1/4" x 3/16") T-track, as well as Kenyon 1 1/4" I-beam Traveller Track (K-4548)*, and Amiot 32mm I-beam Traveller Track. Old style aluminum Track-mount Control Ends are still available (see below).
*Single Sheave, Track-mount Control End w/ Cam Cleat - Left: NF 1331L:* *Single Sheave, Track-mount Control End w/ Cam Cleat - Right: NF 1331R*
For single purchase systems. Formed SS ends (4" long) slide onto track and are held in place with a 3/8" SS screw that fits into any existing stop hole, or a new one can be drilled and tapped (3/8"-16), if necessary, for maximum outboard placement and optimum fit. Control line dead-ends on becket on car and goes around Control End sheave and through cam cleat.
*Single Sheave, Track-mount Control End w/ Cam Cleat & Becket - Left: NF 1331BL:* *Single Sheave, Track-mount Control End w/ Cam Cleat & Becket - Right: NF 1331BR*
For 2-1 purchase systems. Formed SS ends (4" long) slide onto track and are held in place with a 3/8" SS screw that fits into any existing stop hole, or a new one can be drilled and tapped (3/8"-16), if necessary, for maximum outboard placement and optimum fit. Control line dead-ends on becket/eye strap, goes through a sheave mounted on the car, and comes back around Control End sheave and through cam cleat.
*Double Sheave, Track-mount Control End w/ Cam Cleat - Left: NF 1332L:* *Double Sheave, Track-mount Control End w/ Cam Cleat - Right: NF 1332R:*
For 3-1 purchase systems. Formed SS ends (4" long) slide onto track and are held in place with a 3/8" SS screw that fits into any existing stop hole, or a new one can be drilled and tapped (3/8"-16), if necessary, for maximum outboard placement and optimum fit. Control line dead-ends on becket on car, goes around upper Control End sheave, back through sheave mounted on the car, then around lower Control End sheave and through cam cleat.
*Double Sheave, Track-mount Control End w/ Cam Cleat & Becket - Left: NF 1332BL:* *Double Sheave, Track-mount Control End w/ Cam Cleat & Becket - Right: NF 1332BR:*
For 4-1 purchase systems. Formed SS ends (4" long) slide onto track and are held in place with a SS screw that fits into any existing stop hole, or a new one can be drilled, if necessary, for maximum outboard placement. Control line dead-ends on becket/eye strap, goes around upper car sheave, back around upper Control End sheave, through lower car sheave, and comes back around lower Control End sheave and through cam cleat.
*Single Sheave, Track-mount Control End: NF 1330:* For single purchase systems with cleats mounted separately. Formed SS ends (4" long) slide onto track and are held in place with a 3/8" SS screw that fits into any existing stop hole, or a new one can be drilled and tapped (3/8"-16), if necessary, for maximum outboard placement and optimum fit. Control line dead-ends on becket on car and goes around Control End sheave to separate cleat.
*Single Sheave, Track-mount Control End w/ Becket: NF 1330B:* For 2-1 purchase systems with cleats mounted separately. Formed SS ends (4" long) slide onto track and are held in place with a 3/8" SS screw that fits into any existing stop hole, or a new one can be drilled and tapped (3/8"-16), if necessary, for maximum outboard placement and optimum fit. Control line dead-ends on becket/eye strap, goes through a sheave mounted on the car, and comes back around Control End sheave to separate cleat.
*Double Sheave, Track-mount Control End: NF 1333:* For 3-1 purchase systems with cleats mounted separately. Formed SS ends (4" long) slide onto track and are held in place with a 3/8" SS screw that fits into any existing stop hole, or a new one can be drilled and tapped (3/8"-16), if necessary, for maximum outboard placement and optimum fit. Control line dead-ends on becket on car, goes around upper Control End sheave, back through the sheave mounted on the car, then around lower Control End sheave to separate cleat.
*Double Sheave, Track-mount Control End w/ Becket: NF 1333B:* For 4-1 purchase systems with cleats mounted separately. Formed SS ends (4" long) slide onto track and are held in place with a 3/8" SS screw that fits into any existing stop hole, or a new one can be drilled and tapped (3/8"-16), if necessary, for maximum outboard placement and optimum fit. Control line dead-ends on Control End becket, goes around upper car sheave, around upper Control End sheave, around lower car sheave, then around lower Control End sheave to separate cleat.
Old Style Track-mount Control Ends are black anodized aluminum, feature integral rubber bumpers (NF 1177R), and mount with a 5/16" horizontal bolt. A limited number are still available.
*Single Control End w/ Cam Cleat & Becket - Left: NF 1331XL:* *Single Control End w/ Cam Cleat & Becket - Right: NF 1331XR:* Old Style Aluminum Single sheave Control End is 4" long (including bumpers) with ‘half-cam’ cleat. For 2-1 purchase systems. LO
*Double Control End w/ Cam Cleat & Becket - Left: NF 1332XL:* *Double Control End w/ Cam Cleat & Becket - Right: NF 1332XR:* Old Style Aluminum Double sheave Control End is 4" long (including bumpers) with ‘half-cam’ cleat. For 3-1 or 4-1 purchase systems. RO
*Double Sheave, Track-mount Control End w/ Becket: NF 1335X:* Heavy duty unit features 2" ball bearing sheaves and is 6" long with bumpers.
Deck-mount Control Ends are cast aluminum with beckets for 2-1, 3-1 or 4-1 purchase, and extend 5 1/4" beyond track end. Units use 2" diameter sheaves (NF 16161S), and have recess for NF 16469 cam plates, or cleats can be mounted separately on deck. Mounting screws with nuts and washers are included, (longer screws might be necessary for some deck-mounted installations). As these units cover the end of the track, separate end stops (NF 1176) are not required.
*Single Sheave, Deck-mount Control End w/ Becket: NF 16169:*
Cast Single sheave Control End has tab with bumpers that extends 1 1/2" over Track surface. Used interchangeably on left and right sides for 2-1 purchase systems. Control line dead-ends on becket, goes through Sheave mounted on the car, and comes back around sheave to separate cleat. Unit is (maximum) 2 1/4" wide and extends 5 1/8" beyond Track end. Includes 2" Delrin Sheave, NF 16161S, below.
*Double Sheave, Deck-mount Control End w/ Becket: NF 16269:*
Cast Double sheave Control End has tab with bumpers that extends 1 1/2" over Track surface. Used interchangeably on left and right sides for 3-1 or 4-1 purchase systems. Control line dead-ends on becket on car, goes around upper control end sheave, back through Sheave mounted on the car, then around lower control end sheave to separate cleat. Unit is (maximum) 2 1/4" wide and extends 5 1/8" beyond Track end. Includes 2" Delrin Sheaves, NF 16161S, below.
	*Replacement Sheave for Deck-mount Control Ends: NF 16161S:*
	Delrin sheave is 2" diameter x 19/32" (<5/8") wide x 5/16" ID.
*Cam Plate for Deck-mount Control End: NF 16469:* SS Cam Cleat mounting plate fastens in recess under Deck-mount Control Ends, NF 16161 & *NF 16261.* Provides mount for cam cleat without drilling additional holes in the deck.
*Cam Plate Assembly w/ Cam Cleat: NF 16469A:* SS Cam Cleat with eyestrap attached to NF 16469 Cam Plate.

Line Control Conversion Kits are available to convert pin stop systems to efficient controllable Line Control Systems using the existing Car and Track. Standard kit is easily installed in minutes without drilling. NF 1169 Line Control Conversion Kits provide for a 3-1 or 4-1 purchase and come complete with 2 Control Ends, appropriate Car Conversion Kit with 3/8" Samson XLS spliced control lines, 2 Cam Cleats (except where noted), and all fasteners (longer screws might be necessary for some deck-mounted installations). See descriptions of Control Ends and Car Conversion Kits, above, for further information.
Standard Line Control Conversion Kit - Track-mount: NF 1169-A3 Kit: Kit includes NF 1332L & NF 1332R Track-mount Control Ends with Integral Cam Cleat, the NF 1165-K3 Car Conversion Kit, and 3/8" x 18' spliced control lines. Provides a 3-1 purchase.
Track-mount Line Control Conversion Kit - 4-1: NF 1169-A4 Kit: Kit includes NF 1332BL & *NF 1332BR* Track-mount Control Ends with Integral Cam Cleat, the NF 1165-K5 Car Conversion Kit, and 3/8" x 23' spliced control lines. Provides a 4-1 purchase.
*Track-mount Line Control Conversion Kit w/ Separate Cams - 3-1: NF 1169-B3 Kit:* Kit includes (2) NF 1333 Control Ends, NF 1165-K3 Car Conversion Kit with 3/8" x 23' spliced control lines, and (2) Schaefer 70-55 SS Cam Cleats with integral bullseye. Provides a 3-1 purchase.
*Track-mount Line Control Conversion Kit w/ Separate Cams - 4-1: NF 1169-B4 Kit:* Kit includes (2) NF 1333B Control Ends, NF 1165-K5 Car Conversion Kit with 3/8" x 30' spliced control lines, and (2) Schaefer 70-55 SS Cam Cleats with integral bullseye. Provides a 4-1 purchase.
*Deck-mount Line Control Conversion Kit w/ Integral Cams: NF 1169-C3 Kit:* Kit includes (2) NF 16269 Deck-mount Control Ends, (2) *NF 16469A* Cam plate assemblies with Cam Cleat, and the NF 1165-K3 Car Conversion Kit with 3/8" x 18' spliced control lines. Provides a 3-1 purchase.
*Deck-mount Line Control Conversion Kit w/ Separate Cams: NF 1169-D3 Kit:* Kit includes (2) NF 16269 Deck-mount control ends, *NF 1165-K3* Car Conversion Kit with 3/8" x 23' spliced control lines, and (2) Schaefer 70-55 SS Cam Cleats with integral bullseye. Provides a 3-1 purchase.
*Deck-mount Line Control Conversion Kit without Cam Cleats: NF 1169-E3 Kit:* Kit includes (2) NF 16269 Deck-mount control ends and *NF 1165-K3* Car Conversion Kit with 3/8" x 23' spliced control lines. For use with customer supplied Cleats. Provides a 3-1 purchase.

Main Sheet Block Assemblies While most NF 1169 Main Sheet Systems used a Main Sheet Block that was shackled to the Traveller Car Eyestrap, a variety of specialized Main Sheet Block Assemblies were developed for specific OEM applications, all of which featured an integral Spring to keep the Main Sheet Block upright at all times. Main Sheet Block Assemblies listed here are specifically designed for use on Nicro-Fico Traveller Cars for NF 1169 Traveller Track. A variety of configurations not listed here are available on a semi-custom basis, please forward complete details for a quote.
Single Mainsheet Block w/ Becket for 4-wheel Cars: NF Sch 16-02X: Single Mainsheet Block Assembly with Becket for use on NF 1165 & other 4-wheel Traveller Cars for NF 1169 Traveller Track. Series 07 Block Assembly attaches to Car with (2) 5/16" bolts on 1 3/4" centers and features integral Spring Assembly to keep the Block upright. Block has black aluminum cheeks with SS straps and Delrin sheave, and features removable Becket.
Mainsheet Fiddle Block for 4-wheel Cars: NF Sch 16-03X: Mainsheet Fiddle Block Assembly for use on NF 1165 & other 4-wheel Traveller Cars for NF 1169 Traveller Track. Series 07 Block Assembly attaches to Car with (2) 5/16" bolts on 1 3/4" centers and features integral Spring Assembly to keep the Block upright. Block has black aluminum cheeks with SS straps and 3 Delrin sheaves.
Mainsheet Fiddle Block w/ Becket for 4-wheel Cars: NF Sch 16-04X: Mainsheet Fiddle Block Assembly with Becket for use on NF 1165 & other 4-wheel Traveller Cars for NF 1169 Traveller Track. Series 07 Block Assembly attaches to Car with (2) 5/16" bolts on 1 3/4" centers and features integral Spring Assembly to keep the Block upright. Block has black aluminum cheeks with SS straps and 3 Delrin sheaves, and features removable Becket.
Mainsheet Fiddle Block w/ Becket & Cam Cleat for 4-wheel Cars: NF Sch 16-08X:
Mainsheet Fiddle Block Assembly with Becket and Cam Cleat for use on NF 1165 & other 4-wheel Traveller Cars for NF 1169 Traveller Track. Series 07 Block Assembly attaches to Car with (2) 5/16" bolts on 1 3/4" centers and features integral Spring Assembly to keep the Block upright. Block has black aluminum cheeks with SS straps, 2 Delrin sheaves, Cam Cleat for Mainsheet, and features removable Becket.
Mainsheet Fiddle Block w/ Extra Block & Cam Cleat for 4-wheel Cars: NF Sch 16-09X:
Mainsheet Fiddle Block Assembly with Extra Single Block and Cam Cleat provides a 5-1 purchase, for use on NF 1165 & other 4-wheel Traveller Cars for NF 1169 Traveller Track. Series 07 Block Assembly attaches to Car with (2) 5/16" bolts on 1 3/4" centers and features integral Spring Assembly to keep the Block upright. Block Assembly has black aluminum cheeks with SS straps, and Cam Cleat for Mainsheet. Special as used on Cape Dory 33, and others. SK4383
Heavy-duty Mainsheet Fiddle Block w/ Becket for 4-wheel Cars: NF Sch 19-04X:
Heavy-duty Mainsheet Fiddle Block Assembly with Becket for use on NF 1165 & other 4-wheel Traveller Cars for NF 1169 Traveller Track. Series 9 Block Assembly attaches to Car with (2) 5/16" bolts on 1 3/4" centers and features integral Spring Assembly to keep the Block upright. Block has black aluminum cheeks with SS straps and 3 removable Delrin sheaves, and features removable Becket.
Mainsheet Fiddle Block w/ Becket for 6 & 8-wheel Cars: NF Sch 19-06X:
Heavy-duty Mainsheet Fiddle Block Assembly with Becket for use on NF 1390 & other 6, and 8-wheel Traveller Cars for NF 1169 Traveller Track. Series 9 Block Assembly attaches to Car Channel's 1/2" Clevis Pin and features integral Spring Assembly to keep the Block upright. Block has black aluminum cheeks with SS straps, 3 removable Delrin sheaves, and features removable Becket. #

Your cart

Spars, Rigging, and Hardware for Sailboats