Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com           Ordering/Questions

IYE  1 1/4" Traveller Track System


The IYE 1 1/4" Traveller System is designed around a heavy anodized X-shaped Track that measures 1 1/4" (32mm) across the top. Traveller Cars run on Hardcote Anodized Aluminum Ball-Bearing wheel assemblies that have a 1 1/8" Outside Diameter.

Cars are available in 4-wheel and 6-wheel versions with a variety of Control Sheave and Cam Cleat configurations. Track-mounted Control Ends are available with or without Cam Cleats for purchases of up to 4-1.
 

Traveller Track
Traveller Cars
Traveller Car Parts
Traveller Ends & Stops
Traveller Control Ends

 

IYE Track2


IYE   1 1/4" Traveller Track
IYE 1 1/4" Traveller Track: IYE 32C-01-__ft.:
IYE 1 1/4" Traveller Track is an anodized Aluminum X-shaped Track that measures 1 1/4" (32mm) across the top and bottom, and is 1 1/4" (32mm) high. Track is drilled for 1/4" (6mm) FH screws on 6" (152mm) centers, and has 3/8" diameter stop holes on 2" centers. Track weighs 1.03 lbs./ft. and is available in various lengths.

 

IYE Track2

IYE   1 1/4" Traveller Cars
The IYE 1 1/4" Traveller Cars run on Hardcote Anodized Aluminum Ball-Bearing wheel assemblies that have a 1 1/8" Outside Diameter. Cars are available in 4-wheel and 6-wheel versions with a variety of Control Sheave and Cam Cleat configurations. A Becket, IYE 32C-37K, below, can be added to any Car to increase purchase by one. Early versions of these Cars had solid Delrin Wheels; Replacement Wheel Kits are available for them, see Traveller Car Parts, below. New-style Ball-Bearing wheel assemblies are not reparable or replaceable.

 

4-Wheel Traveller Car: IYE 32C-4-11:
4-wheel Traveller Car for IYE 1 1/4" Traveller Track is constructed of aluminum alloy and features Hardcote Anodized Aluminum Ball-Bearing wheels for minimum friction. Car has permanent pivoting shackle for attachment to mainsheet block, and tapped holes to allow for attachment of various Control Sheave and Cam Cleat Assemblies. Car is 4 3/8" (111mm) long x 3" (76mm) wide.

 

4-Wheel Traveller Car w/ 2 Control Sheaves: IYE 32C-4-12:
4-wheel Traveller Car for IYE 1 1/4" Traveller Track is constructed of aluminum alloy and features Hardcote Anodized Aluminum Ball-Bearing wheels for minimum friction. Car has permanent pivoting shackle for attachment to mainsheet block and (2) Ball-Bearing Sheaves for Control Lines with Cover Plate on one side. Car is 4 3/8" (111mm) long x 3" (76mm) wide. Provides a 2-1-control purchase, or add Becket Assembly, IYE 32C-37BA, for a 3-1-control purchase.

 

IYE 32C-12-4
4-Wheel Traveller Car w/ 2 Sheaves & Cam Cleats: IYE 32C-4-13:
As IYE 32C-4-12, above, but with 2 Cam Cleats on specially angled SS plates mounted beneath the Control Sheaves. Provides a 2-1 control purchase, or add Becket Assembly, IYE 32C-37BA, for a 3-1 control purchase.

 

4-Wheel Traveller Car w/ 4 Control Sheaves: IYE 32C-4-16:
4-wheel Traveller Car for IYE 1 1/4" Traveller Track is constructed of aluminum alloy and features Hardcote Anodized Aluminum Ball-Bearing wheels for minimum friction. Car has permanent pivoting shackle for attachment to mainsheet block and (2) Ball-Bearing Sheaves for Control Lines with Cover Plate on both sides. Car is 4 3/8" (111mm) long x 3" (76mm) wide. Provides a 4-1 control purchase.

 

4-Wheel Traveller Car w/ 4 Sheaves & Cam Cleats: IYE 32C-4-19:
As IYE 32C-4-16, above, but with 2 Cam Cleats on specially angled SS plates mounted beneath the Control Sheaves. Provides a 4-1 control purchase, or add Becket Assembly, IYE 32C-37BA, for a 5-1 control purchase.

 


6-Wheel Traveller Car: IYE 32C-6-11:
6-wheel Traveller Car for IYE 1 1/4" Traveller Track is constructed of aluminum alloy and features Hardcote Anodized Aluminum Ball-Bearing wheels for minimum friction. Car has permanent pivoting shackle for attachment to mainsheet block, and tapped holes to allow for attachment of various Control Sheave and Cam Cleat Assemblies. Car is 4 3/8" (111mm) long x 3" (76mm) wide.

 

6-Wheel Traveller Car w/ 2 Control Sheaves: IYE 32C-6-12:
6-wheel Traveller Car for IYE 1 1/4" Traveller Track is constructed of aluminum alloy and features Hardcote Anodized Aluminum Ball-Bearing wheels for minimum friction. Car has permanent pivoting shackle for attachment to mainsheet block and 2 Ball-Bearing Sheaves for Control Lines with Cover Plate on one side. Car is 4 3/8" (111mm) long x 3" (76mm) wide. Provides a 2-1 control purchase, or add Becket Assembly, IYE 32C-37BA, for a 3-1 control purchase.

 

IYE 32C-12-6
6-Wheel Traveller Car w/ 2 Sheaves & Cam Cleats: IYE 32C-6-13:
As IYE 32C-6-12, above, but with 2 Cam Cleats on specially angled SS plates mounted beneath the Control Sheaves. Provides a 2-1 control purchase, or add Becket Assembly, IYE 32C-37BA, for a 3-1 control purchase.

 

IYE32C-13-6
6-Wheel Traveller Car w/ 4 Control Sheaves: IYE 32C-6-16:
6-wheel Traveller Car for IYE 1 1/4" Traveller Track is constructed of aluminum alloy and features Hardcote Anodized Aluminum Ball-Bearing wheels for minimum friction. Car has permanent pivoting shackle for attachment to mainsheet block and 2 Ball-Bearing Sheaves for Control Lines with SS Cover Plate on both sides. Car is 4 3/8" (111mm) long x 3" (76mm) wide. Provides a 4-1 control purchase.

 

6-Wheel Traveller Car w/ 4 Sheaves & Cam Cleats: IYE 32C-6-19:
As IYE 32C-6-16, above, but with 2 Cam Cleats on specially angled SS plates mounted beneath the Control Sheaves. Provides a 4-1 control purchase, or add Becket Assembly, IYE 32C-37BA, for a 5-1 control purchase.

 


IYE  1 1/4" Traveller Car Parts
IYE 1 1/4" Traveller Cars have been produced with 2 different wheel configurations. New-Style Cars have Hardcote Anodized Aluminum Ball-Bearing wheel assemblies that are not reparable or replaceable. Early versions of these Cars had solid Delrin Wheels; Replacement Wheel Kits are available for them.

 

Wheel Replacement Kit for Old-Style 4-Wheel Car: IYE 32C-X44:
Wheel Replacement Kit for IYE Old-Style 1 1/4" 4-wheel Traveller Cars includes 4 Delrin Wheels, and special plastic lock-washers to mount them. Machined Delrin Wheels are 1 1/8" OD x 3/8" ID x 13/32" (.395") wide with Hub to .445" wide.

 

Wheel Replacement Kit for Old-Style 6-Wheel Car: IYE 32C-X46:
As IYE 32C-X44, above, but with 6 Replacement Wheels and washers, for IYE Old-Style 1 1/4" 6-wheel Traveller Cars.

 

Control Sheave Ass'y for Traveller Car: IYE 32C-36:
Control Sheave Assembly for IYE 1 1/4" Traveller Cars, fits all 4-wheel, and New-style (4 3/8" long) 6-wheel Traveller Cars that have tapped axles. Assembly consists of (2) 1 1/8" OD Delrin Ball-Bearing Sheave Assemblies and a Cover Plate with (2) mounting screws. Fasteners are on 2 5/8" Centers. Cover Plate is 3 3/4" long x 1 1/16" wide.

 

Cam Cleat Ass'y Set for Traveller Car: IYE 32C-38CK:
Cam Cleat for Control Line is mounted on SS Plate to fit all IYE 1 1/4" Traveller Cars that have tapped axles. Each Cam Cleat Assembly mounts beneath Control Sheave Assembly and mounts on Car with one additional screw (included). Set includes 2 Cam Cleat Assemblies (Right & Left) with Servo #22 Cam Cleats.

 

Becket Ass'y for Traveller Car: IYE 32C-37BA:
Becket for dead-ending Control Lines on Traveller Car. Single Becket (SS Eyestrap) screws into existing threaded holes in Traveller Car, allowing attachment of both Control Lines, increasing purchase ratio of any Car by one. Suitable for use on all IYE 1 1/4" 4-wheel Traveller Cars, and on New-Style (shorter) 6-wheel Cars (4 3/8" long) that have tapped axles. On Cars with 2 Control Sheaves, Becket mounts on opposite side from Control Sheaves. On Cars with 4 Control Sheaves, Becket mounts on top of Control Sheaves, using existing screws. Becket Assembly includes mounting screws (6mm) and insulating washers. Becket mounting holes are on 2 5/8" centers. Only one Becket is required per Car.

 


IYE  1 1/4" Traveller Ends & Stops
Plastic Track End Stop: IYE 32C-21:
Plastic Track End Stop covers track end and attaches to deck with (1) 1/4" (6mm) FH screw. Black plastic End Stop is (maximum) 2 5/8" wide x 1 1/4" high, and extends 1 1/4" beyond end of track.

 

Aluminum Track End ‘Crash Stop’: IYE 32C-22X:
Heavy-duty Aluminum Track End Stop is used on free-floating car systems without end controls, and as a base for Control Ends. Anodized, extruded Aluminum Track End is 2 1/2" long x 2 1/8" wide and features rubber bumpers to cushion car impact. Mounting requires drilling and tapping (2) 6mm holes in Track (on 1 3/8" centers), or unit can be thru-bolted using longer screws.

 

Aluminum Track End ‘Crash Stop’ - Long: IYE 32C-22L:
Long Heavy-duty Aluminum Track End Stop is used on free-floating car systems without end controls, and as a base for Control Ends. Anodized, extruded Aluminum Track End is 4" long x 2 1/8" wide and features rubber bumpers to cushion car impact. Mounting requires drilling and tapping (2) 6mm holes in Track (on 40mm centers), or unit can be thru-bolted using longer screws.

 

Adjustable Track Stop w/ Spring Pin: IYE 32C-27:
Adjustable Track Stop for IYE 1 1/4" Traveller Track features SS Spring Pin Plunger and rubber bumpers to cushion car impact. Used to position the Car on free-floating car systems without end controls. Spring Pin Track Stop is 2 1/8" long x 2 1/8" wide.

 


IYE  1 1/4" Traveller Control Ends
Single Sheave, Track-mount Control End w/ Becket: IYE 32C-23:
For 2-1 purchase systems (or 4-1 w/ Car-mounted Cam Cleats). Extruded Aluminum Control Ends with rubber bumpers slide onto track, assembly is fastened to Track with (2) 6mm (1/4") screws which fit into threaded holes in the track. Single 1 1/2" sheave allows for control lines up to 7/16" diameter, Becket is included. Unit is 4" long x 2 1/8" wide. Mounting requires drilling and tapping (2) 6mm holes in Track (on 40mm centers), or assembly can be thru-bolted using longer screws.

 

Single Sheave, Track-mount Control End w/ Cam Cleat & Becket - Left: IYE 32C-24L:
Single Sheave, Track-mount Control End w/ Cam Cleat & Becket - Right: IYE 32C-24R:
For 2-1 purchase systems. Control Ends are as IYE 32C-23, above, but include Cam Cleat plate assembly which mounts beneath the Two (2) sheaves.

 

 
Double Sheave, Track-mount Control End: IYE 32C-25:
For 3-1 purchase systems (or 5-1 w/ Car-mounted Cams). Extruded Aluminum Control Ends with rubber bumpers slide onto track, assembly is fastened to Track with (2) 6mm (1/4") screws which fit into threaded holes in the track. Two (2) sheaves allow for control lines up to 7/16" diameter. Unit is 4" long x 2 1/8" wide. Mounting requires drilling and tapping (2) 6mm holes in Track (on 40mm centers), or assembly can be thru-bolted using longer screws.

 

Double Sheave, Track-mount Control End w/ Cam Cleat - Left: IYE 32C-26L:
Double Sheave, Track-mount Control End w/ Cam Cleat - Right: IYE 32C-26R:
For 3-1 purchase systems. Extruded Aluminum Control End with Cam Cleat and rubber bumpers slide onto track, assembly is fastened to Track with (2) 6mm (1/4") screws which fit into threaded holes in the track. Two (2) sheaves allow for control lines up to 7/16" diameter. Unit is 4" long x 2 1/8" wide. Mounting requires drilling and tapping (2) 6mm holes in Track (on 40mm centers), or assembly can be thru-bolted using longer screws.

 

  Cam Cleat Ass'y Set for IYE 32C-25 Control Ends: IYE 32C-28K:
  Cam Cleat Plate Assembly as used on IYE 32C-26 Control Ends, above. Set includes 2 Cam Cleat Assemblies (Right & Left) with Servo #22 Cam Cleats.

 

 
Double Sheave, Track-mount Control End w/ Cam Cleat & Becket - Left: IYE 32C-26LB:
Double Sheave, Track-mount Control End w/ Cam Cleat & Becket - Right: IYE 32C-26RB:
For 4-1 purchase systems. Control Ends are as IYE 32C-26, above, but include Becket with removable Pin.

 

 

Single Sheave, Track-mount Control End w/ Becket: IYE 32C-23HB:
For 2-1 purchase systems (or 4-1 w/ Car-mounted Cams). Extruded Aluminum Control Ends with rubber bumpers slide onto track, assembly is fastened to Track with (2) 1/4" bolts which fit into threaded holes in the track. Single 1 1/2" sheave allows for control lines up to 7/16" diameter, Becket is included. Unit is (maximum) 2 3/8" long (excluding bumpers) x 2 1/8" wide. Mounting requires drilling and tapping (2) 1/4-20 holes in Track (on 1 3/8" centers), or assembly can be thru-bolted using longer screws.

 

Double Sheave, Track-mount Control End: IYE 32C-25H:
For 3-1 and 4-1 purchase systems. Extruded Aluminum Control Ends with rubber bumpers slide onto track, assembly is fastened to Track with (2) 1/4" bolts which fit into threaded holes in the track. Two (2) 1 1/2" sheaves allow for control lines up to 7/16" diameter. Unit is (maximum) 2 3/8" long (excluding bumpers) x 2 1/8" wide. Mounting requires drilling and tapping (2) 1/4-20 holes in Track (on 1 3/8" centers), or assembly can be thru-bolted using longer screws.
For systems with Deck-mounted Cleats, unit provides a 3-1 purchase. Control line dead-ends on Becket on Car, goes around upper Control End Sheave, back through the Sheave on the Car, then around lower Control End Sheave to a deck-mounted Cleat.
For systems with Car-mounted Cleats, unit provides a 4-1 purchase. Control line dead-ends on Becket on Car, goes around upper Control End Sheave, back through the Sheave on the Car, then around lower Control End Sheave back through the 2nd Sheave on the Car and to the Car-mounted Cam Cleat.

 

 

 

 

 

Double Sheave, Track-mount Control End w/ Becket: IYE 32C-25HB:
For 4-1 purchase systems, Control End is as IYE 32C-25H, above, but with the addition of a removable Becket.
For systems with Deck-mounted Cleats, unit provides a 4-1 purchase. Control line dead-ends on Control End Becket, goes around Sheave on Car, back around upper Control End Sheave, back through 2nd Sheave on Car, then around lower Control End Sheave to a deck-mounted Cleat.

 

Double Sheave, Track-mount Control End w/ Cam Cleat - Left: IYE 32C-26HL:
Double Sheave, Track-mount Control End w/ Cam Cleat - Right: IYE 32C-26HR:
For 3-1 purchase systems. Control Ends are as IYE 32C-25H, above, but include Cam Cleat plate assembly which mounts beneath the Two (2) sheaves.
Control End Assembly with integral Cam Cleat provides a 3-1 purchase. Control line dead-ends on Becket on Car, goes around upper Control End Sheave, back through the Sheave on the Car, then around lower Control End Sheave to the Car-mounted Cam Cleat.

 

  Cam Cleat Ass'y Set for IYE 32C-25H Control Ends: IYE 32C-28HK:
 

Cam Cleat Plate Assembly as used on IYE 32C-26H Control Ends, above. Set includes 2 Cam Cleat Assemblies (Right & Left) with Servo #22 Cam Cleats.

 

~ Top ~

~ Back to IYE Main Page ~

~ Home ~