Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions

1 7/8" OD Spinnaker Poles & Fittings


Standard 1 7/8" OD Spinnaker Pole Tube
Measurements: 1.875" OD x 1.75" ID (47.6mm x 44.5mm)
Wall Thickness: .065"
Weight/ft.: .43 lbs.
Moments of inertia:
Circumference: 5.9"
Alloy: 6063-T6
Stock Lengths: Up to 20'
Common Boat usage: 15' - 20' LOA
round_tube.TIF (16698 bytes)
1 7/8" OD Standard Spinnaker Pole Tube is used in a variety of applications, including Spinnaker Poles and Whisker Poles. Standard Pole Fittings for this tube size are listed below.

Standard 1 7/8" OD Spinnaker Pole Tube

1 7/8" OD Spinnaker Pole Tube - Clear Anodized: RTA 1.87-065A-___:
1 7/8" OD Spinnaker Pole Tube is stocked, fully anodized, in a variety of lengths up to the maximum listed above. To order, specify tube length. 


1 7/8" OD Spinnaker Pole End Fittings
Standard End Fittings are suitable for use on the Outboard end of the Pole, and on the Inboard end when a Ring Car (or a fixed Mast Ring) is used on the Mast. Their use on both ends is required when using an End for End jibing procedure. See also: Spinnaker Cars.
 

Standard Pole Ends for 1 7/8" OD Tube
Listed below are Standard End Fittings - These pole ends are suitable for either (or both) ends of a spinnaker pole or whisker pole, or the inboard end of a reaching strut. Their use on both ends is required when using an End for End jibing procedure. When used on the Inboard end a Ring Car (or a fixed Mast Ring) is required on the Mast.


'Ultra' Plastic EL Piston End for 1 7/8" OD Tube: EF-187-UXPL:

Forespar 'Ultra' composite EL Piston End incorporates Spectra loops for attachment of pole lift and foreguy (or bridles), and includes an external Spectra Trip lanyard loop. Self-Latching EL Piston End has a stainless steel spring-loaded plunger pin that can be engaged simply by pushing onto Ring or Guy. Gray molded End Fitting projects 3" (maximum) from tube end. F3S

~ Back to Spinnaker Poles Main Page ~

~ Back to Spars Main Page ~

~ Home ~