Spars, Rigging, and Hardware for SailboatsRigRite, Inc. 

Sheave Bushings & Spacers 


Sheave Bushings are installed in Sheaves to reduce working friction, or to reduce their Inside Diameter (ID). Stainless Steel Sheave Spacers are normally longer than the Sheave is wide, and are used to keep Cheeks and Separating plates from 'pinching' the Sheave, or to increase the diameter of the Sheave Axle. Sheave Bushings and Spacers are listed here by Outside Diameter (OD), then Inside Diameter (ID), and length, in ascending order. Please note that the Inside Diameter (ID) listed for these items indicate the size of the bolt or Pin they are to be used with. The actual ID is always slightly larger to insure proper clearance with bolts and Pins. RigRite stocks a large variety of Sheave Bushings and Spacers. Those most commonly
used in Sailboat Hardware applications are listed below, but many 'specials' are stocked as well. Many common Replacement Sheave Bushings and Spacers listed here are also listed elsewhere onsite by Manufacturer, underneath the component that they are part of. Stainless Steel Flange Bushings are listed separately,
See Flange Bushings. 
Bronze Sheave Bushings & Spacers 

Bronze Sheave Bushings 

5/16" Outside Diameter  Oilite Bronze Bushings 
Bronze Sheave Bushing  5/16" OD x 3/16" ID x 1/4" long: KBB538:
Sintered Bronze Sheave Bushing measures 5/16" OD x 3/16" ID x 1/4" long, for use on standard 3/16" axle. 

Bronze Sheave Bushing  5/16" OD x 1/4" ID x 1/2" long: KBB5416:
Sintered Bronze Sheave Bushing measures 5/16" OD x 1/4" ID x 1/2" long, for use on standard 1/4" axle. 

3/8" Outside Diameter  Oilite Bronze Bushings 
Bronze Sheave Bushing  3/8" OD x 1/4" ID x 1/4" long: KBB648:
Sintered Bronze Sheave Bushing measures 3/8" OD x 1/4" ID x 1/4" long, for use on standard 1/4" axle. 
Bronze Sheave Bushing  3/8" OD x 1/4" ID x 1/2" long: K9523:
Sintered Bronze Sheave Bushing measures 3/8" OD x 1/4" ID x 1/2" long, for use on standard 1/4" axle. KBB6416 

Bronze Sheave Bushing  3/8" OD x 5/16" ID x 1/4" long: KBB658:
Sintered Bronze Sheave Bushing measures 3/8" OD x 5/16" ID x 1/4" long, for use on 5/16" axle. 
Bronze Sheave Bushing  3/8" OD x 5/16" ID x 3/8" long: K11113:
Sintered Bronze Sheave Bushing measures 3/8" OD x 5/16" ID x 3/8" long, for use on 5/16" axle. KBB6512 
Bronze Sheave Bushing  3/8" OD x 5/16" ID x 29/64" long: KBB6514.5: Sintered Bronze Sheave Bushing measures 3/8" OD x 5/16" ID x 29/64" (>7/16") long, for use on 5/16" axle. K1158814.5 
Bronze Sheave Bushing  3/8" OD x 5/16" ID x 1/2" long: K11588:
Sintered Bronze Sheave Bushing measures 3/8" OD x 5/16" ID x 1/2" long, for use on 5/16" axle. KBB6516 
Bronze Sheave Bushing  3/8" OD x 5/16" ID x 5/8" long: KBB6520:
Sintered Bronze Sheave Bushing measures 3/8" OD x 5/16" ID x 5/8" long, for use on 5/16" axle.


7/16" Outside Diameter  Oilite Bronze Bushings 
Bronze Sheave Bushing  7/16" OD x 1/4" ID x 3/8" long: KBB7412:
Sintered Bronze Sheave Bushing measures 7/16" OD x 1/4" ID x 3/8" long, for use on 1/4" axle. 
Bronze Sheave Bushing  7/16" OD x 1/4" ID x 1/2" long: KBB7416:
Sintered Bronze Sheave Bushing measures 7/16" OD x 1/4" ID x 1/2" long, for use on 1/4" axle. 

Bronze Sheave Bushing  7/16" OD x 5/16" ID x <7/32" long: KBB757: Sintered Bronze Sheave Bushing measures 7/16" OD x 5/16" ID x <7/32" (.215") long, for use on 5/16" axle. 
Bronze Sheave Bushing  7/16" OD x 5/16" ID x 1/4" long: KBB758:
Sintered Bronze Sheave Bushing measures 7/16" OD x 5/16" ID x 1/4" long, for use on 5/16" axle. 
Bronze Sheave Bushing  7/16" OD x 5/16" ID x 1/2" long: KBB7516:
Sintered Bronze Sheave Bushing measures 7/16" OD x 5/16" ID x 1/2" long, for use on 5/16" axle. 
Bronze Sheave Bushing  7/16" OD x 5/16" ID x 5/8" long: KBB7520:
Sintered Bronze Sheave Bushing measures 7/16" OD x 5/16" ID x 5/8" long, for use on 5/16" axle.


1/2" Outside Diameter  Oilite Bronze Bushings 
Bronze Sheave Bushing  1/2" OD x 1/4" ID x 1/2" long: KBB8416:
Sintered Bronze Sheave Bushing measures 1/2" OD x 1/4" ID x 1/2" long, for use on standard 1/4" axle. 

Bronze Sheave Bushing  1/2" OD x 5/16" ID x 3/8" long: KBB8512:
Sintered Bronze Sheave Bushing measures 1/2" OD x 5/16" ID x 3/8" long, for use on 5/16" axle. 
Bronze Sheave Bushing  1/2" OD x 5/16" ID x 1/2" long: K10921:
Sintered Bronze Sheave Bushing measures 1/2" OD x 5/16" ID x 1/2" long, for use on 5/16" axle. KBB8516 
Bronze Sheave Bushing  1/2" OD x 5/16" ID x 9/16" long: KBB8518:
Sintered Bronze Sheave Bushing measures 1/2" OD x 5/16" ID x 9/16" long, for use on 5/16" axle. W 

Bronze Sheave Bushing  1/2" OD x 3/8" ID x 1/4" long: KBB867.5: Sintered Bronze Sheave Bushing measures 1/2" OD x 3/8" ID x <1/4" (.23") long, for use on standard 3/8" axle. 
Bronze Sheave Bushing  1/2" OD x 3/8" ID x 3/8" long: KBB8612:
Sintered Bronze Sheave Bushing measures 1/2" OD x 3/8" ID x 3/8" long, for use on standard 3/8" axle. 
Bronze Sheave Bushing  1/2" OD x 3/8" ID x 7/16" long: KBB8614:
Sintered Bronze Sheave Bushing measures 1/2" OD x 3/8" ID x 7/16" long, for use on standard 3/8" axle. 
Bronze Sheave Bushing  1/2" OD x 3/8" ID x 1/2" long: K10972:
Sintered Bronze Sheave Bushing measures 1/2" OD x 3/8" ID x 1/2" long, for use on standard 3/8" axle. KBB8616 
Bronze Sheave Bushing  1/2" OD x 3/8" ID x 5/8" long: KBB8620:
Sintered Bronze Sheave Bushing measures 1/2" OD x 3/8" ID x 5/8" long, for use on standard 3/8" axle. 
Bronze Sheave Bushing  1/2" OD x 3/8" ID x 3/4" long: KBB8624:
Sintered Bronze Sheave Bushing measures 1/2" OD x 3/8" ID x 3/4" long, for use on standard 3/8" axle.


9/16" Outside Diameter  Oilite Bronze Bushings 
Bronze Sheave Bushing  9/16" OD x 3/8" ID x 3/8" long: KBB9612:
Sintered Bronze Sheave Bushing measures 9/16" OD x 3/8" ID x 3/8" (.375") long, for use on 3/8" axle/sheave pin. 
Bronze Sheave Bushing  9/16" OD x 3/8" ID x 1/2" long: KBB9616:
Sintered Bronze Sheave Bushing measures 9/16" OD x 3/8" ID x 1/2" (.500") long, for use on 3/8" axle/sheave pin. K10346S 
Bronze Sheave Bushing  9/16" OD x 3/8" ID x 17/32" long: K10346:
Sintered Bronze Sheave Bushing measures 9/16" OD x 3/8" ID x 17/32" (.535") long, for use on 3/8" axle/sheave pin. BB9617 

Bronze Sheave Bushing  9/16" OD x 7/16" ID x 15/32" long: KBB9715:
Sintered Bronze Sheave Bushing measures 9/16" OD x 7/16" ID x 15/32" (.460") long, for use on 7/16" axle/sheave pin. K885115 
Bronze Sheave Bushing  9/16" OD x 7/16" ID x 1/2" long: KBB9716:
Sintered Bronze Sheave Bushing measures 9/16" OD x 7/16" ID x 1/2" (.500") long, for use on 7/16" axle/sheave pin. K885116 
Bronze Sheave Bushing  9/16" OD x 7/16" ID x 17/32" long: K8851:
Sintered Bronze Sheave Bushing measures 9/16" OD x 7/16" ID x 17/32" (.535") long, for use on 7/16" axle/sheave pin. BB9717 
Bronze Sheave Bushing  9/16" OD x 7/16" ID x 5/8" long: KBB9720:
Sintered Bronze Sheave Bushing measures 9/16" OD x 7/16" ID x 5/8" long, for use on 7/16" axle/sheave pin. K885120 
Bronze Sheave Bushing  9/16" OD x 7/16" ID x 11/16" long: KBB9722:
Sintered Bronze Sheave Bushing measures 9/16" OD x 7/16" ID x 11/16" long, for use on 7/16" axle/sheave pin. K885122 
Bronze Sheave Bushing  9/16" OD x 7/16" ID x 3/4" long: KBB9724:
Sintered Bronze Sheave Bushing measures 9/16" OD x 7/16" ID x 3/4" long, for use on 7/16" axle/sheave pin. 
Bronze Sheave Bushing  9/16" OD x 7/16" ID x 25/32" (>3/4") long: KBB9725:
Sintered Bronze Sheave Bushing measures 9/16" OD x 7/16" ID x 25/32" long, for use on 7/16" axle/sheave pin. K885125


5/8" Outside Diameter  Oilite Bronze Bushings 
Bronze Sheave Bushing  5/8" OD x 3/8" ID x 1/2" long: KBB10616:
Sintered Bronze Sheave Bushing measures 5/8" OD x 3/8" ID x 1/2" long, for use on 3/8" axle/sheave pin. 
Bronze Sheave Bushing  5/8" OD x 3/8" ID x 5/8" long: KBB10620:
Sintered Bronze Sheave Bushing measures 5/8" OD x 3/8" ID x 1/2" long, for use on 3/8" axle/sheave pin. 

Bronze Sheave Bushing  5/8" OD x 7/16" ID x 1/2" long: KBB10716:
Sintered Bronze Sheave Bushing measures 5/8" OD x 7/16" ID x 1/2" long, for use on 7/16" axle/sheave pin. 
Bronze Sheave Bushing  5/8" OD x 7/16" ID x 3/4" long: KBB10724:
Sintered Bronze Sheave Bushing measures 5/8" OD x 7/16" ID x 3/4" long, for use on 7/16" axle/sheave pin. 
Bronze Sheave Bushing  5/8" OD x 7/16" ID x 13/16" long: KBB10726: Sintered Bronze Sheave Bushing measures 5/8" OD x 7/16" ID x 13/16" long, for use on 7/16" axle/sheave pin. X 
Bronze Sheave Bushing  5/8" OD x 7/16" ID x 1" long: KBB10732:
Sintered Bronze Sheave Bushing measures 5/8" OD x 7/16" ID x 1" long, for use on 7/16" axle/sheave pin. 

Bronze Sheave Bushing  5/8" OD x 1/2" ID x 7/16" long: KBB10814:
Sintered Bronze Sheave Bushing measures 5/8" OD x 1/2" ID x 7/16" long, for use on 1/2" axle/sheave pin. 
Bronze Sheave Bushing  5/8" OD x 1/2" ID x 1/2" long: KBB10816:
Sintered Bronze Sheave Bushing measures 5/8" OD x 1/2" ID x 1/2" long, for use on 1/2" axle/sheave pin. 
Bronze Sheave Bushing  5/8" OD x 1/2" ID x 5/8" long: KBB10820:
Sintered Bronze Sheave Bushing measures 5/8" OD x 1/2" ID x 5/8" long, for use on 1/2" axle/sheave pin. 
Bronze Sheave Bushing  5/8" OD x 1/2" ID x 3/4" long: KBB10824:
Sintered Bronze Sheave Bushing measures 5/8" OD x 1/2" ID x 3/4" long, for use on 1/2" axle/sheave pin. 
Bronze Sheave Bushing  5/8" OD x 1/2" ID x 7/8" long: KBB10828:
Sintered Bronze Sheave Bushing measures 5/8" OD x 1/2" ID x 7/8" long, for use on 1/2" axle/sheave pin. 
Bronze Sheave Bushing  5/8" OD x 1/2" ID x 1" long: KBB10832:
Sintered Bronze Sheave Bushing measures 5/8" OD x 1/2" ID x 1" long, for use on 1/2" axle/sheave pin.


11/16" Outside Diameter  Oilite Bronze Bushings 
Bronze Sheave Bushing  11/16" OD x 1/2" ID x 1/2" long: KBB11816:
Sintered Bronze Sheave Bushing measures 11/16" OD x 1/2" ID x 1/2" long, for use on 1/2" axle/sheave pin. 
Bronze Sheave Bushing  11/16" OD x 1/2" ID x 5/8" long: KBB11820:
Sintered Bronze Sheave Bushing measures 11/16" OD x 1/2" ID x 5/8" long, for use on 1/2" axle/sheave pin. 
Bronze Sheave Bushing  11/16" OD x 1/2" ID x 11/16" long: KBB11822:
Sintered Bronze Sheave Bushing measures 11/16" OD x 1/2" ID x 11/16" (.687") long, for use on 1/2" axle/sheave pin.


3/4" Outside Diameter  Oilite Bronze Bushings 
Bronze Sheave Bushing  3/4" OD x 1/2" ID x 1/2" long: KBB12816:
Sintered Bronze Sheave Bushing measures 3/4" OD x 1/2" ID x 1/2" long, for use on 1/2" axle/sheave pin. 
Bronze Sheave Bushing  3/4" OD x 1/2" ID x 5/8" long: K11519:
Sintered Bronze Sheave Bushing measures 3/4" OD x 1/2" ID x 5/8" long, for use on 1/2" axle/sheave pin. BB12820 
Bronze Sheave Bushing  3/4" OD x 1/2" ID x 3/4" long: K10597:
Sintered Bronze Sheave Bushing measures 3/4" OD x 1/2" ID x 3/4" long, for use on 1/2" axle/sheave pin. BB12824 
Bronze Sheave Bushing  3/4" OD x 1/2" ID x 1" long: K11152:
Sintered Bronze Sheave Bushing measures 3/4" OD x 1/2" ID x 1" long, for use on 1/2" axle/sheave pin. BB12832 

Bronze Sheave Bushing  3/4" OD x 9/16" ID x 1/2" long: KBB12916:
Sintered Bronze Sheave Bushing measures 3/4" OD x 9/16" ID x 1/2" long, for use on 9/16" axle/sheave pin. 

Bronze Sheave Bushing  3/4" OD x 5/8" ID x 1/2" long: KBB121016:
Sintered Bronze Sheave Bushing measures 3/4" OD x 5/8" ID x 1/2" long, for use on 5/8" axle/sheave pin. 
Bronze Sheave Bushing  3/4" OD x 5/8" ID x 5/8" long: KBB121020:
Sintered Bronze Sheave Bushing measures 3/4" OD x 5/8" ID x 5/8" long, for use on 5/8" axle/sheave pin. 
Bronze Sheave Bushing  3/4" OD x 5/8" ID x 3/4" long: KBB121024:
Sintered Bronze Sheave Bushing measures 3/4" OD x 5/8" ID x 3/4" long, for use on 5/8" axle/sheave pin. 
Bronze Sheave Bushing  3/4" OD x 5/8" ID x 7/8" long: KBB121028:
Sintered Bronze Sheave Bushing measures 3/4" OD x 5/8" ID x 7/8" long, for use on 5/8" axle/sheave pin.


13/16" Outside Diameter  Oilite Bronze Bushings 
Bronze Sheave Bushing  13/16" OD x 5/8" ID x 1/2" long: KBB131016:
Sintered Bronze Sheave Bushing measures 13/16" OD x 5/8" ID x 1/2" long, for use on 5/8" axle/sheave pin. 
Bronze Sheave Bushing  13/16" OD x 5/8" ID x 1" long: KBB131032:
Sintered Bronze Sheave Bushing measures 13/16" OD x 5/8" ID x 1/2" long, for use on 5/8" axle/sheave pin.


7/8" Outside Diameter  Oilite Bronze Bushings 
Bronze Sheave Bushing  7/8" OD x 1/2" ID x 3/4" long: KBB14824:
Sintered Bronze Sheave Bushing measures 7/8" OD x 1/2" ID x 3/4" long, for use on 1/2" axle/sheave pin. 

Bronze Sheave Bushing  7/8" OD x 5/8" ID x 5/8" long: KBB141020:
Sintered Bronze Sheave Bushing measures 7/8" OD x 5/8" ID x 5/8" long, for use on 5/8" axle/sheave pin. 
Bronze Sheave Bushing  7/8" OD x 5/8" ID x 3/4" long: KBB141024:
Sintered Bronze Sheave Bushing measures 7/8" OD x 5/8" ID x 3/4" long, for use on 5/8" axle/sheave pin. 
Bronze Sheave Bushing  7/8" OD x 5/8" ID x 7/8" long: KBB141028:
Sintered Bronze Sheave Bushing measures 7/8" OD x 5/8" ID x 7/8" long, for use on 5/8" axle/sheave pin. 
Bronze Sheave Bushing  7/8" OD x 5/8" ID x 1" long: KBB141032:
Sintered Bronze Sheave Bushing measures 7/8" OD x 5/8" ID x 1" long, for use on 5/8" axle/sheave pin. 

Bronze Sheave Bushing  7/8" OD x 3/4" ID x 1/2" long: KBB141216:
Sintered Bronze Sheave Bushing measures 7/8" OD x 3/4" ID x 1/2" long, for use on 3/4" axle/sheave pin. 
Bronze Sheave Bushing  7/8" OD x 3/4" ID x 3/4" long: KBB141224:
Sintered Bronze Sheave Bushing measures 7/8" OD x 3/4" ID x 3/4" long, for use on 3/4" axle/sheave pin. 
Bronze Sheave Bushing  7/8" OD x 3/4" ID x 1" long: KBB141232:
Sintered Bronze Sheave Bushing measures 7/8" OD x 3/4" ID x 1" long, for use on 3/4" axle/sheave pin.


1" Outside Diameter  Oilite Bronze Bushings 
Bronze Sheave Bushing  1" OD x 3/4" ID x 1/2" long: KBB161216:
Sintered Bronze Sheave Bushing measures 1" OD x 3/4" ID x 1/2" long, for use on 3/4" axle/sheave pin. 
Bronze Sheave Bushing  1" OD x 3/4" ID x 5/8" long: KBB161220:
Sintered Bronze Sheave Bushing measures 1" OD x 3/4" ID x 5/8" long, for use on 3/4" axle/sheave pin. 
Bronze Sheave Bushing  1" OD x 3/4" ID x 3/4" long: KBB161224:
Sintered Bronze Sheave Bushing measures 1" OD x 3/4" ID x 3/4" long, for use on 3/4" axle/sheave pin. 
Bronze Sheave Bushing  1" OD x 3/4" ID x 1" long: KBB161232:
Sintered Bronze Sheave Bushing measures 1" OD x 3/4" ID x 1" long, for use on 3/4" axle/sheave pin.


Bronze Sheave Bushing  1" OD x 7/8" ID x 3/4" long: KBB161232:
Sintered Bronze Sheave Bushing measures 1" OD x 7/8" ID x 3/4" long, for use on 7/8" axle/sheave pin.


1 1/8" Outside Diameter  Oilite Bronze Bushings 
Bronze Sheave Bushing  1 1/8" OD x 7/8" ID x 3/4" long: KBB181424:
Sintered Bronze Sheave Bushing measures 1 1/8" OD x 7/8" ID x 3/4" long, for use on 7/8" axle/sheave pin.


1 1/4" Outside Diameter  Oilite Bronze Bushings 
Bronze Sheave Bushing  1 1/4" OD x 1" ID x 7/16" long: KBB201614:
Sintered Bronze Sheave Bushing measures 1 1/4" OD x 1" ID x 7/16" long, for use on 1" axle/sheave pin. 
Bronze Sheave Bushing  1 1/4" OD x 1" ID x 3/4" long: KBB201624:
Sintered Bronze Sheave Bushing measures 1 1/4" OD x 1" ID x 3/4" long, for use on 1" axle/sheave pin.


Stainless Steel Sheave Bushings & Spacers 

1/4" Outside Diameter  SS Bushings & Spacers 
SS Sheave Bushing/Spacer  1/4" OD x 1/8" ID x <23/64" long: BS4264:
Stainless Steel Bushing/Spacer is 1/4" OD x 1/8" ID x <23/64" (.355") long. 

SS Sheave Bushing/Spacer  1/4" OD x 3/16" ID x 25/64" long: BS4325: Stainless Steel Bushing/Spacer is 1/4" OD x 3/16" ID x 25/64" (.390") long. 
SS Sheave Bushing/Spacer  1/4" OD x 3/16" ID x 27/64" long: BS4327:
Stainless Steel Bushing/Spacer is 1/4" OD x 3/16" ID x 27/64" (.423") long. 
SS Sheave Bushing/Spacer  1/4" OD x 3/16" ID x 15/32" long: BS4330:
Stainless Steel Bushing/Spacer is 1/4" OD x 3/16" ID x 15/32" (.475") long. mil 
SS Sheave Bushing/Spacer  1/4" OD x 3/16" ID x 37/64" long: BS4337: Stainless Steel Bushing/Spacer is 1/4" OD x 3/16" ID x 37/64" (.582") long. RL 
SS Sheave Bushing/Spacer  1/4" OD x 3/16" ID x 11/16" long: BS4344:
Stainless Steel Bushing/Spacer is 1/4" OD x 3/16" ID x 11/16" (.682") long. mil 
SS Sheave Bushing/Spacer  1/4" OD x 3/16" ID x 23/32" long: K9331:
Stainless Steel Bushing/Spacer is 1/4" OD x 3/16" ID x 23/32" (.710") long. BS4346 
SS Sheave Bushing/Spacer  1/4" OD x 3/16" ID x 3/4" long: K10204:
Stainless Steel Bushing/Spacer is 1/4" OD x 3/16" ID x 3/4" (.750") long. BS4348


5/16" Outside Diameter  SS Bushings & Spacers 
SS Sheave Bushing/Spacer  5/16" OD x 3/16" ID x 1/4" long: BS5317:
Stainless Steel Bushing/Spacer is 5/16" OD x 3/16" ID x 1/4" (.260") long. 07214

SS Sheave Bushing/Spacer 
5/16" OD x 3/16" ID x 5/16" long: BS5320:
Stainless Steel Bushing/Spacer is 5/16" OD x 3/16" ID x 5/16" (.311") long. 0723

SS Sheave Bushing/Spacer 
5/16" OD x 3/16" ID x <23/64" long: BS5323:
Stainless Steel Bushing/Spacer is 5/16" OD x 3/16" ID x <23/64" (.355") long. 0712

SS Sheave Bushing/Spacer 
5/16" OD x 3/16" ID x <29/64" long: BS5329:
Stainless Steel Bushing/Spacer is 5/16" OD x 3/16" ID x <29/64" (.450") long. 076

SS Sheave Bushing/Spacer 
5/16" OD x 3/16" ID x 15/32" long: BS5330:
Stainless Steel Bushing/Spacer is 5/16" OD x 3/16" ID x 15/32" (.468") long. KT

SS Sheave Bushing/Spacer 
5/16" OD x 3/16" ID x <1/2" long: BS5331:
Stainless Steel Bushing/Spacer is 5/16" OD x 3/16" ID x <1/2" (.480") long. 0711

SS Sheave Bushing/Spacer 
5/16" OD x 3/16" ID x 1/2" long: BS5332:
Stainless Steel Bushing/Spacer is 5/16" OD x 3/16" ID x 1/2" (.505") long. 0731

SS Sheave Bushing/Spacer 
5/16" OD x 3/16" ID x 17/32" long: BS5334:
Stainless Steel Bushing/Spacer is 5/16" OD x 3/16" ID x 17/32" (.530") long. 072351 

SS Sheave Bushing/Spacer  5/16" OD x 1/4" ID x 1/4" long: K9370:
Stainless Steel Bushing/Spacer is 5/16" OD x 1/4" (.265") ID x 1/4" (.265") long. BS5417 07516K

SS Sheave Bushing/Spacer  5/16" OD x 1/4" ID x 5/16" long: BS5421.5: Stainless Steel Bushing/Spacer is 5/16" OD x 1/4" (.265") ID x >5/16" (.335") long. NF10310BS

SS Sheave Bushing/Spacer  5/16" OD x 1/4" ID x 3/8" long: K9312:
Stainless Steel Bushing/Spacer is 5/16" OD x 1/4" (.265") ID x 3/8" (.375") long. BS5424 DLJ24

SS Sheave Bushing/Spacer  5/16" OD x 1/4" ID x 21/32" long: BS5442: Stainless Steel Bushing/Spacer is 5/16" OD x 1/4" ID x 21/32" (>5/8")(.650") long. 07516RF

SS Sheave Bushing/Spacer  5/16" OD x 1/4" ID x 21/32" long: BS5445:
Stainless Steel Bushing/Spacer is 5/16" OD x 1/4" ID x 45/64" (.705") long.


3/8" Outside Diameter  SS Bushings & Spacers 
SS Sheave Bushing/Spacer  3/8" OD x 3/16" ID x 17/64" long: BS6317:
Stainless Steel Bushing/Spacer is 3/8" OD x 3/16" ID x 17/64" (>1/4") (.270") long. AP

SS Sheave Bushing/Spacer  3/8" OD x 3/16" ID x 15/32" long: BS6330:
Stainless Steel Bushing/Spacer is 3/8" OD x 3/16" ID x 15/32" (.465") long. AP

SS Sheave Bushing/Spacer  3/8" OD x 3/16" ID x 17/32" long: BS6334: Stainless Steel Bushing/Spacer is 3/8" OD x 3/16" ID x 17/32" (.530") long. 0749

SS Sheave Bushing/Spacer  3/8" OD x 3/16" ID x 41/64" long: BS6341:
Stainless Steel Bushing/Spacer is 3/8" OD x 3/16" ID x 41/64" (>5/8") (.635") long. 0705 
SS Sheave Bushing/Spacer  3/8" OD x 3/16" ID x 45/64" long: BS6345:
Stainless Steel Bushing/Spacer is 3/8" OD x 3/16" ID x 45/64" (.703") long. 0765 

SS Sheave Bushing/Spacer  3/8" OD x 1/4" ID x 13/32" long: BS6426:
Stainless Steel Bushing/Spacer is 3/8" OD x 1/4" ID x 13/32" (.405") long. 0752

SS Sheave Bushing/Spacer  3/8" OD x 1/4" ID x 29/64" long: BS6429:
Stainless Steel Bushing/Spacer is 3/8" OD x 1/4" ID x 29/64" (>7/16") (.455") long. 0752L

SS Sheave Bushing/Spacer  3/8" OD x 1/4" ID x 33/64" long: BS6433:
Stainless Steel Bushing/Spacer is 3/8" OD x 1/4" ID x 33/64" (>1/2") (.515") long. 0734

SS Sheave Bushing/Spacer  3/8" OD x 1/4" ID x 37/64" long: BS6437:
Stainless Steel Bushing/Spacer is 3/8" OD x 1/4" ID x 37/64" (>9/16") (.585") long. 0724

SS Sheave Bushing/Spacer  3/8" OD x 1/4" ID x 39/64" long: BS6439: Stainless Steel Bushing/Spacer is 3/8" OD x 1/4" ID x 39/64" (<5/8") (.605") long. NF

SS Sheave Bushing/Spacer  3/8" OD x 1/4" ID x 41/64" long: BS6441:
Stainless Steel Bushing/Spacer is 3/8" OD x 1/4" ID x 41/64" (>5/8") (.635") long. 0714

SS Sheave Bushing/Spacer  3/8" OD x 1/4" ID x 3/4" long: BS6448:
Stainless Steel Bushing/Spacer is 3/8" OD x 1/4" ID x 3/4" (.750") long. H

SS Sheave Bushing/Spacer  3/8" OD x 1/4" ID x 1 1/8" long: BS6472: Stainless Steel Bushing/Spacer is 3/8" OD x 1/4" ID x 1 1/8" (1.125") long. SPD

SS Sheave Bushing/Spacer  3/8" OD x 1/4" ID x 1 5/8" long: BS64104: Stainless Steel Bushing/Spacer is 3/8" OD x 1/4" ID x 1 5/8" (1.625") long. As used in a variety of RigRite Mastheads and some Merriman Lead Blocks. RR

SS Sheave Bushing/Spacer  3/8" OD x 1/4" ID x 1 7/8" long: BS64120: Stainless Steel Bushing/Spacer is 3/8" OD x 1/4" ID x 1 7/8" (1.890") long. As used in a variety of RigRite Mastheads. RR DO 

SS Sheave Bushing/Spacer  3/8" OD x 5/16" ID x 5/8" long: BS6540:
Stainless Steel Bushing/Spacer is 3/8" OD x 5/16" ID x 5/8" (.625") long. 0714LID


7/16" Outside Diameter  SS Bushings & Spacers 
SS Sheave Bushing/Spacer  7/16" OD x 1/4" ID x 13/16" long: BS7452:
Stainless Steel Bushing/Spacer is 7/16" OD x 1/4" ID x 13/16" (.820") long. 0713 

SS Sheave Bushing/Spacer  7/16" OD x 5/16" ID x 1/8" long: BS7508:
Stainless Steel Bushing/Spacer is 7/16" OD x 5/16" ID x >1/8" (.133") long. K11322 KT

SS Sheave Bushing/Spacer  7/16" OD x 5/16" ID x 11/64" long: KT4515B:
Stainless Steel Bushing/Spacer is 7/16" OD x 5/16" ID x 11/64" (.175") long. BS7511 KT.75

SS Sheave Bushing/Spacer  7/16" OD x 5/16" ID x 13/32" long: K9013:
Stainless Steel Bushing/Spacer is 7/16" OD x 5/16" ID x 13/32" (.410") long. BS7526

SS Sheave Bushing/Spacer 
7/16" OD x 5/16" ID x 1/2" long: BS7532: Stainless Steel Bushing/Spacer is 7/16" OD x 5/16" ID x <1/2" (.495") long. K11410S

SS Sheave Bushing/Spacer 
7/16" OD x 5/16" ID x 17/32" long: K11410:
Stainless Steel Bushing/Spacer is 7/16" OD x 5/16" ID x 17/32" (.525") long. BS7534

SS Sheave Bushing/Spacer 
7/16" OD x 5/16" ID x 9/16" long: K9014:
Stainless Steel Bushing/Spacer is 7/16" OD x 5/16" ID x 9/16" long. As used on 3756 4sheave Gooseneck Assembly (all sheaves). BS7536

SS Sheave Bushing/Spacer 
7/16" OD x 5/16" ID x 41/64" long: BS7541:
Stainless Steel Bushing/Spacer is 7/16" OD x 5/16" ID x 41/64" (.640") long. NF3097R

SS Sheave Bushing/Spacer 
7/16" OD x 5/16" ID x 59/64" long: BS7559:
Stainless Steel Bushing/Spacer is 7/16" OD x 5/16" ID x 59/64" (>7/8") (.916") long. H 

SS Sheave Bushing/Spacer  7/16" OD x <3/8" ID x 3/4" long: BS75P48:
Stainless Steel Bushing/Spacer is 7/16" OD x <3/8" ID (.365") x 3/4" (.745") long.


1/2" Outside Diameter  SS Bushings & Spacers 
SS Sheave Bushing/Spacer  1/2" OD x 1/4" ID x 7/16" long: BS8428:
Stainless Steel Bushing/Spacer is 1/2" OD x 1/4" ID x 7/16" (.440") long.

SS Sheave Bushing/Spacer  1/2" OD x 1/4" ID x 5/8" long: BS8440:
Stainless Steel Bushing/Spacer is 1/2" OD x 1/4" ID x 5/8" long. 0762

SS Sheave Bushing/Spacer  1/2" OD x 1/4" ID x 21/32" long: BS8442:
Stainless Steel Bushing/Spacer is 1/2" OD x 1/4" ID x 21/32" (.656") long. mc

SS Sheave Bushing/Spacer  1/2" OD x 1/4" ID x 43/64" long: BS8443: Stainless Steel Bushing/Spacer is 1/2" OD x 1/4" ID x 43/64" (.671") long. As used in Merriman Deck Turning Blocks.

SS Sheave Bushing/Spacer  1/2" OD x 1/4" ID x 45/64" long: BS8445:
Stainless Steel Bushing/Spacer is 1/2" OD x 1/4" ID x 45/64" (.700") long.

SS Sheave Bushing/Spacer  1/2" OD x 1/4" ID x 13/16" long: BS8452:
Stainless Steel Bushing/Spacer is 1/2" OD x 1/4" ID x 13/16" (.820") long. 02040 

SS Sheave Bushing/Spacer  1/2" OD x 5/16" ID x 11/32" long: BS8522:
Stainless Steel Bushing/Spacer is 1/2" OD x 5/16" ID x 11/32" (.352") long. NF

SS Sheave Bushing/Spacer  1/2" OD x 5/16" ID x 9/16" long: BS8536:
Stainless Steel Bushing/Spacer is 1/2" OD x 5/16" ID x 9/16" (.563") long.

SS Sheave Bushing/Spacer  1/2" OD x 5/16" ID x 5/8" long: BS8540:
Stainless Steel Bushing/Spacer is 1/2" OD x 5/16" ID x 5/8" (.625") long.

SS Sheave Bushing/Spacer  1/2" OD x 5/16" ID x 41/64" long: BS8541:
Stainless Steel Bushing/Spacer is 1/2" OD x 5/16" ID x 41/64" (.640") long.

SS Sheave Bushing/Spacer  1/2" OD x 5/16" ID x 29/32" long: BS8558: Stainless Steel Bushing/Spacer is 1/2" OD x 5/16" ID x 29/32" (.906") long. S02012 

SS Sheave Bushing/Spacer  1/2" OD x 3/8" ID x <3/16" long: K8318: Stainless Steel Bushing/Spacer is 1/2" OD x 3/8" ID x <3/16" (.175") long. * BS8612

SS Sheave Bushing/Spacer  1/2" OD x 3/8" ID x <1/4" long: K11234:
Stainless Steel Bushing/Spacer is 1/2" OD x 3/8" ID x <1/4" (.240") long. BS8616 KT1.25

SS Sheave Bushing/Spacer  1/2" OD x 3/8" ID x 11/32" long: K8319:
Stainless Steel Bushing/Spacer is 1/2" OD x 3/8" ID x 11/32" (.350") long. BS8622

SS Sheave Bushing/Spacer  1/2" OD x 3/8" ID x 7/16" long: BS8628:
Stainless Steel Bushing/Spacer is 1/2" OD x 3/8" ID x 7/16" (.440") long. K11413V

SS Sheave Bushing/Spacer  1/2" OD x 3/8" ID x 9/16" long: K11413:
Stainless Steel Bushing/Spacer is 1/2" OD x 3/8" ID x 9/16" (.552") long. BS8636

SS Sheave Bushing/Spacer  1/2" OD x 3/8" ID x 5/8" long: BS8640:
Stainless Steel Bushing/Spacer is 1/2" OD x 3/8" ID x 5/8" (.615") long. K11413L RR MH

SS Sheave Bushing/Spacer  1/2" OD x 3/8" ID x 13/16" long: BS8652:
Stainless Steel Bushing/Spacer is 1/2" OD x 3/8" ID x 13/16" (.820") long. S02028X 

SS Sheave Bushing/Spacer  1/2" OD x <7/16" (.430") ID x 3/8" long: K85332:
Stainless Steel Bushing/Spacer is 1/2" OD x .430" (<7/16") ID x 3/8" long. K85332


9/16" Outside Diameter  SS Bushings & Spacers 
SS Sheave Bushing/Spacer  9/16" OD x 5/16" ID x 9/16" long: K10320:
Stainless Steel Bushing/Spacer is 9/16" (.545") OD x 5/16" ID x 9/16" (.565") long. As used on Kenyon Traveller Cars. BS9536 KT

SS Sheave Bushing/Spacer  9/16" OD x 5/16" ID x 25/32" long: BS9550: Stainless Steel Bushing/Spacer is 9/16" (.545") OD x 5/16" ID x 25/32" (.780") long.


5/8" Outside Diameter  SS Bushings & Spacers 
SS Sheave Bushing/Spacer  5/8" OD x 5/16" ID x >5/8" long: BS10541:
Stainless Steel Bushing/Spacer is 5/8" OD x 5/16" ID x >5/8" (.637") long. 

SS Sheave Bushing/Spacer  5/8" OD x 3/8" ID x >9/16" long: BS10637: Stainless Steel Bushing/Spacer is 5/8" OD x 3/8" ID x >9/16" (.585") long. Type 316. 020

SS Sheave Bushing/Spacer  5/8" OD x 3/8" ID x 3/4" long: BS10648:
Stainless Steel Bushing/Spacer is 5/8" OD x 3/8" ID x 3/4" (.742") long. As used in Merriman #2 Snatch Block. 02003S

SS Sheave Bushing/Spacer  5/8" OD x 3/8" ID x 13/16" long: BS10652:
Stainless Steel Bushing/Spacer is 5/8" OD x 3/8" ID x 13/16" (.820") long. 02003

SS Sheave Bushing/Spacer  5/8" OD x 3/8" ID x 7/8" long: BS10656: Stainless Steel Bushing/Spacer is 5/8" OD x 3/8" ID x 7/8" (.875") long. As used in Merriman #3 Snatch Block.

SS Sheave Bushing/Spacer  5/8" OD x 3/8" ID x 3/4" long: BS106128:
Stainless Steel Bushing/Spacer is 5/8" OD x 3/8" ID x 2" long. 02003LM 

SS Sheave Bushing/Spacer  5/8" OD x 7/16" ID x 7/16" long: BS10728: Stainless Steel Bushing/Spacer is 5/8" OD x 7/16" ID x 7/16" (.435") long. 02058V 

SS Sheave Bushing/Spacer  5/8" OD x 1/2" ID x 3/8" long: K11258:
Stainless Steel Bushing/Spacer is 5/8" OD x 1/2" ID x 3/8" (.375") long. BS10824


3/4" Outside Diameter  SS Bushings & Spacers 
SS Sheave Bushing/Spacer  3/4" OD x 1/2" ID x 1/2" long: BS12832:
Stainless Steel Bushing/Spacer is 3/4" OD x 1/2" ID x 1/2" long. 

SS Sheave Bushing/Spacer  3/4" OD x 5/8" ID x 1/2" long: K115761:
Stainless Steel Bushing/Spacer is 3/4" OD x 5/8" (.645") ID x 1/2" long. BS121032


7/8" Outside Diameter  SS Bushings & Spacers 
SS Sheave Bushing/Spacer  7/8" OD x 3/8" ID x 2 1/4" long: BS146144: Stainless Steel Bushing/Spacer is 7/8" OD x 3/8" ID x 2 1/4" (2.255") long. 

SS Sheave Bushing/Spacer  7/8" OD x 1/2" ID x 45/64" long: BS14845:
Stainless Steel Bushing/Spacer is 7/8" OD x 1/2" ID x 45/64" (.703") long. NG2RR 

SS Sheave Bushing/Spacer  7/8" OD x 9/16" ID x 5/8" long: BS14940: Stainless Steel Bushing/Spacer is 7/8" OD x 9/16" ID x 5/8" (.625") long. NG2RR

SS Sheave Bushing/Spacer  7/8" OD x 9/16" ID x 45/64" long: BS14945:
Stainless Steel Bushing/Spacer is 7/8" OD x 9/16" (.565") ID x 45/64" (.703") long. NG2RR 

SS Sheave Bushing/Spacer  7/8" OD x 5/8" ID x 3/4" long: BS141048: Stainless Steel Bushing/Spacer is 7/8" OD x 5/8" (.630") ID x 3/4" long.

SS Sheave Bushing/Spacer  7/8" OD x 5/8" ID x 1" long: BS141065: Stainless Steel Bushing/Spacer is 7/8" OD x 5/8" (.630") ID x 1" (1.020") long. sch


1 1/8" Outside Diameter  SS Bushings & Spacers 
SS Sheave Bushing/Spacer  1 1/8" OD x 5/8" ID x 5/8" long: BS181040: Stainless Steel Bushing/Spacer is 1 1/8" OD x 5/8" ID x 5/8" (.627") long. SC111472

SS Sheave Bushing/Spacer  1 1/8" OD x 5/8" ID x 3/4" long: BS181048: Stainless Steel Bushing/Spacer is 1 1/8" OD x 5/8" (.627") ID x 3/4" (.755") long. SC91474

SS Sheave Bushing/Spacer  1 1/8" OD x <5/8" ID x 7/8" long: BS181056: Stainless Steel Bushing/Spacer is 1 1/8" OD x <5/8" (.617") ID x 7/8" (.877") long. SC291467


1 1/4" Outside Diameter  SS Bushings & Spacers 
SS Sheave Bushing/Spacer  1 1/4" OD x 5/8" ID x 1" long: BS201065: Stainless Steel Bushing/Spacer is 1 1/4" OD x 5/8" (.630") ID x 1" (1.020") long. sch 

SS Sheave Bushing/Spacer  1 1/4" OD x 7/8" ID x 1" long: BS201464: Stainless Steel Bushing/Spacer is 1 1/4" OD x 5/8" (.630") ID x 1" long. SC171470 

SS Sheave Bushing/Spacer  1 1/4" OD x 1" ID x 1" long: BS201663: Stainless Steel Bushing/Spacer is 1 1/4" OD x 1" ID x 1" (.982") long. SC141475


1 1/2" Outside Diameter  SS Bushings & Spacers 
SS Sheave Bushing/Spacer  1 1/2" OD x 1 1/4" ID x 1 1/8" long: BS241872:
Stainless Steel Bushing/Spacer is 1 1/2" OD x 1 1/4" ID x 1 1/8" (1.135") long. SC131471 
~ Top ~
~ Home ~