Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions

Kenyon Spars 2040 Mast Section


Kenyon Spars 2040 Mast
Measurements (outside): 4.00" x 2.00" (102mm x 51mm)
Wall Thickness: .075"
Weight/ft.: .91 lbs.
Moments of inertia: Ixx = 1.05", Iyy = .39"
Circumference: 9 3/4"
Alloy: 6063-T6
Sail slides: 1/2" round slugs (A018, A118) or 1/2" boltrope
Standard Mast Lengths: 15'11"
Common Mast usage: DN Iceboat;
Kenyon 2040 Mast Section

Kenyon 2040 Mast Section

2040 Mast Section - Clear Anodized: K-2040CA-___:
Kenyon 2040 Section Mast Tube is stocked in a variety of lengths (listed above) fully anodized, it can also be cut to shorter lengths. To order, specify length.
Sections can also be milled for the sailgate or other components, painted finishes and other lengths are available on special order, Please specify. If you require a complete Mast Assembly, you can select from components below and contact us with specifications.
 


2040 Standard Mast Hardware
Listed below are parts specific to the Kenyon 2040 Mast Section. For more generic parts, see See also, other Kenyon Spar Cleats, Kenyon Exit Blocks, Kenyon Exit Plates, Kenyon Shroud Tangs, and other categories listed under Kenyon Spar Parts. There are many parts for specific configurations that are not listed here. If you require 2040 Mast Components not listed here please contact us with details.

 

Main Halyard Sheave Box: K-11110A-2:
Internal SS Exit Block is used for the Main Halyard Sheave Box on DN Iceboats and similar craft, and has mounting flanges angled specifically for use on the aft side of the 2040 Mast Section. Aluminum sheave, K-10545-1, is 1 1/2" diameter x 3/8" wide and will handle up to 1/8" wire, or rope up to 5/16" diameter. Assembly fits in mast cutout 1 3/4" high x 9/16" wide and projects 1 7/8" inside of mast. Mounting flanges are 1 3/4" high. Assembly is mounted with (4) #10 (3/16") fasteners on 1 5/16" (vertical) hole centers.

 

K-11110A-2

 

SS Forestay Hound: K-11268:

Heavy welded SS Forestay Hound mounts internally in mast section to provide a secure Forestay Attachment point for high-load applications such as the DN Iceboat. Forestay nose with 1/2" hole projects through a 2 1/4" x 3/16" slot in mast. Curved base plate is 5" long x 1" wide and mounts internally with (4) 1/4" (6mm) rivets.

 

K-11268
Halyard Ball Hook w/ Slide Mount: K-11161:

SS Halyard Ball Hook Plate Assembly rides in sail groove on slide clamp, to allow easy vertical adjustment. SS Hook Plate (K-228) is used as Halyard Lock for 3/32" wire halyards with swaged ball (MS 20664-3). Fits all sections using 1/2" round slugs.

 

K-11161

Pivoting Mast Step Assembly w/ 3-Position Adjustable Socket: K-11273A:
Unique Mast Step Assembly features flush mount base casting for 2040 Section with 3 tapped holes (5/8"-11) to allow for different placements of Socket Swivel Screw, K-11274-1. Socket Swivel Screw (included) has Delrin Bushing designed to pivot on a 3/4" rounded pin attached to boat and allows for vertical adjustment, as well as multiple positioning in Base casting.

 

K-11273A

Mast Step Casting w/ 3-Position Socket: K-11273:

Flush mount Mast Step Base casting for 2040 Section has 3 tapped holes (5/8"-11) to allow for different placements of Socket Swivel Screw, K-11274-1.

 

Mast Base Socket Swivel Screw w/ Delrin Bushing: K-11274-1:

Black anodized Socket Swivel Screw has Delrin Bushing designed to pivot on a 3/4" rounded pin attached to boat, and allows for vertical adjustment, as well as multiple positioning when used with K-11273 Base casting. Unit is 1 1/2" diameter, screw portion is 7/8" long with a 5/8"-11 thread.

 

K-11274-1

Delrin Bushing for Mast Base Socket Swivel Screw: K-11275:

Delrin Bushing used with K-11274-1 Socket Swivel Screw, above. Bushing is 1" diameter x 3/4" long.

 

DN Iceboat Halyard: K-11163:

DN Iceboat Halyard for use on 2040 Mast assembly features 3/32" SS wire with SS Headboard Shackle and SS swaged ball (MS 20664-3) for use with SS Halyard Ball Hook Assembly, K-11161. Includes rope tail.

~ Back to Kenyon Main Page ~

~ Home ~