Clevis Pins in Metric or Standard (Imperial) sizes are primarily used to attach Turnbuckles and Rigging to Deck and to Mast, but are also used in a wide variety of other Rigging applications including Gooseneck, Spreader and Sail attachment, and as Sheave Axles. Clevis Pin diameter is equal to the size of the hole it is used in. Clevis Pins are held in place with Cotter Pins (British: Split Pins).

Clevis Pins are measured by Diameter and Grip Length, a given Diameter is available in a variety of Grip lengths. Grip Length is the length between the underside of the Head and an installed Cotter Pin. While a longer than ideal length may be used in some applications, proper sizing keeps dangerous protrusions and weight to a minimum.

Rig-Rite stocks a large variety of Stainless Steel Clevis Pins - most are listed below, as are some Titanium other specialized Pins.

If you require a Clevis Pin not listed here, please contact us specifying dimensions (OD and Grip Length), material (Stainless Steel, Bronze, Titanium, etc.), and application. If unavailable otherwise, we produce many 'specials' and can quote them on a Custom basis.
See also: Standard (Imperial) Clevis Pins, Bronze Clevis Pins, Rigging Pins, Fastpins, Sheave Axle Pins and Cotter Pins.