Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions

Z-SPAR Diamond Struts for Catamarans


Many larger Catamarans are equipped with Diamond Struts to increase Spar stability. Z-Spar masts commonly use a 50mm central Diamond Strut supported by adjustable Side Struts. Large Side Strut has an ID equal to the OD of the smaller Strut, when in proper position, the 2 Struts are fastened together with a Screw and locknut. Central Diamond Strut Nose allows for adjustability of Side Strut angles, Side Struts are attached near Spreader Tips with a single 6mm screw and locknut.
 

Diamond Strut Nose Piece: Z-222N:

Diamond Strut Nose Piece has center hole (21mm) for passage of Diamond wire and attachment points for (2) pivoting Side Strut Ends. Cast aluminum Nose Piece extends 73mm beyond end of 50mm OD Strut tube and is (maximum) 102mm (4") wide.

 

Diamond Strut Base Bracket: Z-222B:

Diamond Strut Base Bracket attaches to the front of the Mast with a 10mm screw. Base is 70mm (2 3/4") high x 60mm (2 3/8") wide and is contoured to fit most Mast Sections.

 

Side Strut End - Small: Z-222-E25:

Small Side Strut End is designed to fit Diamond Strut Nose Piece and pivots to allow for a variety of angles. Cast aluminum Strut End extends 50mm beyond end of 25mm OD Strut tube and is attached with a 6mm screw and locknut.

 

Side Strut End - Large: Z-222-E30:

Large Side Strut End attaches to Spreader near Spreader End with a single 6mm screw and locknut. Cast aluminum Strut End extends 50mm beyond end of 30mm OD Strut tube.

 

 

Diamond Strut Tubing - 50mm: Z-222T50x__:
Clear anodized Tubing for Diamond Strut is 50mm (2") OD x 40mm ID and is available in any length. To order, specify length.

 

 
Small Side Strut Tubing - 25mm: Z-222T25x__:
Clear anodized Tubing for Small support Strut is 25mm (1") OD x 21mm ID and is available in any length. To order, specify length.

 

 
Large Side Strut Tubing - 30mm: Z-222T30x__:
Clear anodized Tubing for Large support Strut is 30mm (1 3/16") OD x 26mm ID and is available in any length. To order, specify length.
 

~ Back to Z-Spar Masts ~

~ Back to Z-Spar Main Page ~

~ Home ~