 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Isomat Spar Cleats |
|
|
|
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Isomat Spar Cleats |
|
|
|
|
|
Cleats commonly used on Spars produced by Isomat, Sparcraft and Charleston Spars. These Builders also commonly used Kenyon Spar Cleats, See Spar Cleats Main Page. |
|
|
Four Hole Spar Cleat - 4 3/4" / 120mm Long: NGC-5: Cast, Black anodized Aluminum Cleat is 120mm (4 3/4") long, and fastens with (4) 5mm (3/16") fasteners on 40mm (1 9/16") x 35mm (1 3/8") hole centers. Installed in the factory with rivets, can also be installed with machine screws.
|
|
| Four Hole Spar Cleat - 6 3/8" / 160mm Long: NGC-6:
Cast, Black anodized Aluminum Cleat is 160mm (6 3/8") long, and fastens with (4) 5mm (3/16") fasteners on 50mm (2") x 40mm (1 9/16") hole centers. Installed in the factory with rivets, can also be installed with machine screws.
|
|
| Four Hole Spar Cleat - 7 7/8" / 200mm Long: NGC-8:
Cast, Black anodized Aluminum Cleat is 200mm (7 7/8") long, and fastens with (4) 5mm (3/16") fasteners on 50mm (2") x 40mm (1 9/16") hole centers. Installed in the factory with rivets, can also be installed with machine screws. |
|
|
|
|
|
|
|
Two Hole Spar Cleat - 4 3/4" / 120mm Long: NGC-5-2A:
Clear anodized Cast Aluminum Spar Cleat is 120mm (4 3/4") long, and fastens with (2) 5mm (3/16") RH screws on 35mm (1 3/8") hole centers. Rectangular Base is 60mm (2 3/8") long x 26mm (1") wide.
|
|
| Two Hole Spar Cleat - 6 3/8" / 160mm Long: NGC-6-2A:
Clear anodized Cast Aluminum Spar Cleat is 160mm (6 3/8") long, and fastens with (2) 5mm (3/16") RH screws on 35mm (1 3/8") hole centers. Rectangular Base is 70mm (2 3/4") long x 30mm (1 1/8") wide.
|
|
| Two Hole Spar Cleat - 7 7/8" / 200mm Long: NGC-8-2A: Clear anodized Cast Aluminum Spar Cleat is 200mm (7 7/8") long, and fastens with (2) 8mm (5/16") RH screws on 50mm (2") hole centers. |
|
~ Back to Spar Cleats Main Page ~
~ Home ~
