Kenyon 7/8" OD Spreader Section

7/8" OD Round Spreader Tube
*7/8" OD Spreader Tube: K-SPR7XCA-____:* 7/8" OD Round Spreader Section is stocked in a clear anodized finish and is available in 2', 4', 6' and 20' lengths, or can be cut to shorter lengths. To order: specify length.

7/8" OD Round Spreader Assemblies & Parts
*7/8" OD Spreader Assembly: K-SPR7A-____:* 7/8" OD Round Spreader Assemblies are supplied without holes for attachment to Mast Bracket. Spreader attaches to different mast Brackets in various ways, hole must be drilled on-site for attachment to Mast Bracket. Outboard end, K-8381N, has slot for shroud up to 3/16" diameter, and holes for seizing wire (included). To order: specify length from inboard end to the slot in the tip.
Spreader Tip for 7/8" OD Spreader: K-8381N: Aluminum Spreader Tip for 7/8" OD x 3/4" ID Spreader has slot for up to 3/16" diameter shroud. Lightweight, compact version replaces earlier Cast style and features cross-hole for seizing wire. New-style turned Tip extends shroud seat 5/16" beyond spreader tube, unit projects 5/8" (maximum) beyond spreader tube and is carefully rounded to reduce sail chafe. was K-9893n
Spreader Boot Pair for 7/8" OD Spreader: SP-022B: Spreader Boot for 7/8" OD Spreader is designed to reduce sail chafe. White Rubber Boot is attached to Spreader and Shroud using wire ties (included) or Rigging Tape. Sold in Pairs only, they are (maximum) 4 1/2" long.

Kenyon Spars 7/8" Round Spreader Section Measurements: 0.875" OD x .759" ID (7/8" x 3/4") Wall Thickness: .058" Weight/ft.: .175 lbs. Moments of inertia: Ixx = Alloy: 6063-T6 Stock Length: 20' Common Boat usage: O'Day 22; San Juan 21, and many others.