Isomat Mast Base Turning Blocks

*Mast Base Turning Block w/ 2" Sheave: NGA-40:* Block with 2" (50mm) diameter delrin sheave will accommodate line up to 7/16" (12mm) diameter. Designed to attach to all New-Style Isomat Mast Steps and Deck Collars with 12mm (1/2") holes, special nut is included. Safe working load is 1750 lbs. (795Kg).
*Mast Base Swivel Block w/ 2" Sheave: NGA-40SW:* Swivel Block with 2" (50mm) diameter delrin sheave will accommodate line up to 7/16" (12mm) diameter. Designed to attach to all New-Style Isomat Mast Steps and Deck Collars with 12mm (1/2") holes, special nut is included. Safe working load is 1750 lbs. (795Kg). Swivel Block provides superior articulation to standard unit. Special as original on Beneteau Oceanis 321 and others.
*Mast Base Turning Block w/ 2" Aluminum Sheave: NGA-40A:* Block with 2" (50mm) diameter Aluminum sheave will accommodate wire up to 3/16" diameter and line up to 7/16" (12mm) diameter. Designed to attach to all New-Style Isomat Mast Steps and Deck Collars with 12mm (1/2") holes, special nut is included. Safe working load is 1750 lbs. (795Kg).

*Mast Base Turning Block w/ 2 3/8" Sheave: NGA-41:* Block with 2 3/8" (60mm) diameter delrin sheave will accommodate line up to 1/2" (14mm) diameter. Designed to attach to all New-Style Isomat Mast Steps and Deck Collars with 12mm (1/2") holes, special nut is included. Safe working load is 2250 lbs. (1020Kg).
*Mast Base Turning Block w/ 2 3/8" Aluminum Sheave: NGA-41A:* Block with 2 3/8" (60mm) diameter Aluminum sheave will accommodate wire up to 1/4" diameter and line up to 1/2" (14mm) diameter. Designed to attach to all New-Style Isomat Mast Steps and Deck Collars with 12mm (1/2") holes, special nut is included. Safe working load is 2250 lbs. (1020Kg).

Threaded Block Studs w/ Nut Threaded Block Studs with Nut, to fit New-Style Isomat Mast Steps and Deck Collars, are available separately for use attaching items including shackles and other blocks. New-Style Steps and Collars allow for the addition of Block Studs at any time without being removed from the deck. Stainless Steel Block Studs have an upper attachment hole and a threaded lower end to fit special Nut. SS nut slides into recess in side of deck casting, Block Stud screws into nut through hole in top of deck casting.
Threaded Block Stud - Lightweight: NG1-22: NG-1 SS Block Stud with nut to fit all New-Style Isomat Steps and Collars. SS nut slides into recess in side of deck casting and Block Stud screws in through hole in top. Stud is 42mm (1 5/8") long x 12mm (15/32") diameter with a 1/4" (6mm) hole for attachment of shackle or block. Lower end has an 8mm thread x 3/8" (10mm) long. Includes special large nut.
Threaded Block Stud - Lightweight w/ 12mm hole: NG1-22LB: NG-1 SS Block Stud with nut and bushing to fit all New-Style Isomat Steps and Collars. SS nut slides into recess in side of deck casting and Block Stud (w/ bushing) screws in through hole in top. Forged Stud is 47mm (1 7/8") long x 8mm (5/16") diameter (12mm (15/32") OD w/ bushing) with a 12mm (15/32") hole for attachment of shackle or block. Lower end has an 8mm thread x 3/8" (10mm) long. Includes special large nut.
Threaded Block Stud - Heavy-Duty: NG2-22: NG-2 SS Block Stud with nut to fit all New-Style Isomat Steps and Collars. SS nut slides into recess in side of deck casting and Block Stud screws in through hole in top. Stud is 52mm (2 1/16") long x 14mm (9/16") maximum diameter with a 12mm shaft and a 5/16" (8mm) hole for attachment of shackle or block. Lower end has an 8mm thread x 3/8" (10mm) long. Includes special large nut.
Threaded Block Stud - Heavy-Duty w/ 12mm hole: NG2-22L: NG-2 SS Block Stud with nut to fit all New-Style Isomat Steps and Collars. SS nut slides into recess in side of deck casting and Block Stud screws in through hole in top. Forged Stud is 49mm (1 15/16") long with a 12mm shaft and a 12mm (15/32") hole for attachment of shackle or block. Lower end has an 8mm thread x 3/8" (10mm) long. Includes special large nut.
Threaded Block Stud - Heavy-Duty w/ Link Plates & 1/4" Pin: NG2-22L-LP:
NG-2 SS Block Stud with nut to fit all New-Style Isomat Steps and Collars. Unit is as NG2-22L, but with permanently attached Link Plates for attachment of Blocks without shackles. Link Plates are 1/2" wide (between straps) and include 1/4" Pin.
Threaded Block Stud - Wide: NG2-22W: Heavy-Duty Wide NG-2 SS Block Stud with nut to fit all New-Style Isomat Steps and Collars. SS nut slides into recess in side of deck casting and Block Stud screws in through hole in top. Special Wide Stud is suitable for direct attachment to a variety of Blocks with Bolt for Block Studs, below. Wide Stud is 50mm (2") long x 16mm (5/8") wide (at hole), with a 12mm shaft and a 1/4" (6mm) hole for attachment of shackle or block, hole can be drilled to 5/16" (8mm) for select applications. Lower end has a 3/8-16 thread, nut is included.

Block Pins Clevis Pin-like Block Pins fit Isomat Steps and Collars without Nut Slots, and must be installed before attaching the Step or Collar to the Deck.
NG2 Mast Step Block Pin - 12mm Special: NG2-20PX: Special SS Block Pin is used for attachment of shackle or block to lead halyards aft. Fits in integral recessed hole in NG60-4X, and other Mast Steps. Block Pin is installed from underside of Mast Step Casting, Mast Step must be removed to install Block Pins. Large head Block Pin is 12mm (<1/2") diameter x 45mm (1 3/4") long (maximum), with a 30mm (1 3/16") grip length and a 6mm (1/4") hole for shackle pin or Block bolt.
NG2 Mast Step Block Pin - 12mm Small: NG2-20PS: Special SS Block Pin is used for attachment of shackle or block to lead halyards aft. Fits in integral recessed hole in NG60-4, NG70-4, and other Mast Steps. Block Pin is installed from underside of Mast Step Casting, Mast Step must be removed to install Block Pins. Small head Block Pin is 12mm (<1/2") diameter x 45mm (1 3/4") long (maximum), with a 30mm (1 3/16") grip length and a 6mm (1/4") hole for shackle pin or Block bolt. F305/385,460/560E
NG2 Mast Step Block Pin - 14mm Special - NG80, NG86: NG2-20PL: Special SS Block Pin is used for attachment of shackle or block to lead halyards aft. Fits in integral recessed hole in *NG80-4, NG86-4,* and other Mast Steps. Block Pin is installed from underside of Mast Step Casting, Mast Step must be removed to install Block Pins. Special Block Pin is 14mm (9/16") diameter x 54mm (2 1/8") long (maximum), with a 35mm (1 3/8") grip length and an 8mm (5/16") hole for shackle pin or Block bolt.

Blocks w/ Bolt for Block Studs & Pins Blocks incorporate a 1/4" SS Bolt and Nylon Washers for attachment to all Block Studs and Block Pins listed above. Washers allow for centering block on Block Stud, Bolt is tightened to allow Block to remain upright regardless of halyard tension.
Bolt-on Turning Block w/ 2" Sheave: NGA-40UA: Black Aluminum Block with 2" (50mm) diameter delrin sheave will accommodate line up to 7/16" (12mm) diameter. Includes 1/4" SS Bolt, Locknut and Nylon Washers for use with all *NG1* and *NG2* Block Studs and Mast Step Block Studs. 2W
Bolt-on Turning Block w/ 2" Aluminum Sheave: NGA-40UAA: Black Aluminum Block with 2" (50mm) diameter Aluminum sheave will accommodate wire up to 3/16" diameter and line up to 7/16" (12mm) diameter. Includes 1/4" SS Bolt, Locknut and Nylon Washers for use with all *NG1* and *NG2* Block Studs and Mast Step Block Studs.
Bolt-on Stainless Turning Block w/ 2" Aluminum Sheave: NGA-40USA: Stainless Steel Block with 2" (50mm) diameter Aluminum sheave will accommodate wire up to 3/16" diameter and line up to 7/16" (12mm) diameter. Includes 1/4" SS Bolt, Locknut and Nylon Washers for use with all *NG1* and *NG2* Block Studs and Mast Step Block Studs.

Bolt-on Turning Block w/ 2 3/8" Sheave: NGA-41UA: Black Aluminum Block with 2 3/8" (60mm) diameter delrin sheave will accommodate lines up to 1/2" (14mm) diameter. Includes 1/4" SS Bolt, Locknut and Nylon Washers for use with all *NG1* and *NG2* Block Studs and Mast Step Block Studs. 5W
Bolt-on Turning Block w/ 2 3/8" Aluminum Sheave: NGA-41UAA: Black Aluminum Block with 2 3/8" (60mm) diameter Aluminum sheave will accommodate wire up to 1/4" diameter and lines up to 1/2" (14mm) diameter. Includes 1/4" SS Bolt, Locknut and Nylon Washers for use with all *NG1* and *NG2* Block Studs and Mast Step Block Studs.
Bolt-on Stainless Turning Block w/ 2 3/8" Aluminum Sheave: NGA-41USA:
Stainless Steel Block with 2 3/8" (60mm) diameter Aluminum sheave will accommodate wire up to 1/4" diameter and lines up to 1/2" (14mm) diameter. Includes 1/4" SS Bolt, Locknut and Nylon Washers for use with all *NG1* and *NG2* Block Studs and Mast Step Block Studs.

Mast Step & Deck Collar Bails Special Mast Step and Deck Collar Bails are used with most Isomat Mast Steps and Deck Collars.
NG1 Mast Step & Deck Collar Bail: NG1-20: SS Formed Bail is used for attachment of blocks and lines. Fits in integral slots of NG37 and smaller Mast Steps, and in sides of NG70 and smaller Deck Collars. Bails are installed from underside of Mast Step or Deck Collar Casting, Casting must be removed to install Bails. Bail is made from 8mm (5/16") rod, and is 2 1/16" (53mm) long x (maximum) 1" (25mm) high.
NG2 Mast Step & Deck Collar Bail: NG2-20: SS Formed Bail is used for attachment of blocks and lines. Fits in integral slots of NG46 and larger Mast Steps, in sides of NG86 and larger Deck Collars, and in aft side of all Deck Collars. Bails are installed from underside of Mast Step or Deck Collar Casting, Casting must be removed to install Bails. Bail is made from 10mm (3/8") rod, and is 2 3/4" (70mm) long x (maximum) 1 15/16" (50mm) high.
NG3 Mast Step Bail Assembly: NG3-20A: SS Formed U-bolt type Bail is used for attachment of Boom Vang or/and standard blocks for leading halyards aft. Fits in integral holes in NG105 Heavy-Duty Mast Step. Bail Nuts are installed from underside of Mast Step Casting, Mast Step must be removed to install Bail(s). Bail is made from 12mm (1/2") rod, and is 3" (78mm) long x 1 9/16" (40mm) between centers. Assembly includes Bail and (2) 12mm jam Nuts.

Blocks w/ Shackle for Steps & Collars using Bails Swivel Blocks incorporate a SS Shackle for attachment to Bails on all Old-Style Mast Steps and Collars, and on New-Style NG 105 Mast Steps. These blocks are also used for Spinnaker Halyards, and in a variety of other applications.
SS Swivel Block w/ 2" Sheave: NGA-40SS: SS Block with 2" (50mm) diameter delrin sheave will accommodate line up to 7/16" (11mm) diameter. Schaefer 05 SS Block has 1/4" strap Shackle and a 1750 lb. safe working load.
Swivel Block w/ 2" Sheave: NGA-40SB: Black Aluminum Block with 2" (50mm) diameter delrin sheave will accommodate line up to 7/16" (11mm) diameter. Schaefer 05 Block has 1/4" strap Shackle and a 1750 lb. safe working load.
Swivel Block w/ 2" Aluminum Sheave: NGA-40SBA: Black Aluminum Block with 2" (50mm) diameter Aluminum sheave will accommodate wire up to 3/16" diameter and line up to 7/16" (11mm) diameter. Schaefer 05 Block has 1/4" strap Shackle and a 1750 lb. safe working load.

Swivel Block w/ 2 3/8" Sheave: NGA-41SS: SS Block with 2 3/8" (60mm) diameter delrin sheave will accommodate line up to 9/16" (14mm) diameter. Schaefer 07 SS Block has 1/4" strap Shackle and a 2250 lb. safe working load.
Swivel Block w/ 2 3/8" Sheave: NGA-41SB: Black Aluminum Block with 2 3/8" (60mm) diameter delrin sheave will accommodate line up to 9/16" (14mm) diameter. Schaefer 07 Block has 1/4" strap Shackle and a 2250 lb. safe working load.
Swivel Block w/ 2 3/8" Aluminum Sheave: NGA-41SBA: Black Aluminum Block with 2 3/8" (60mm) diameter Aluminum sheave will accommodate wire up to 3/16" diameter and line up to 9/16" (14mm) diameter. Schaefer 07 Block has 1/4" strap Shackle and a 2250 lb. safe working load.

High-load Swivel Block w/ 2 3/8" Sheave: NGA-42SS: High-load SS Block with 2 3/8" (60mm) diameter delrin sheave will accommodate line up to 9/16" (14mm) diameter. Schaefer 08 SS Block has 5/16" forged Shackle and a 2750 lb. safe working load.
High-load Swivel Block w/ 2 3/8" Aluminum Sheave: NGA-42SSA: High-load SS Block with 2 3/8" (60mm) diameter Aluminum sheave will accommodate wire up to 1/4" diameter and line up to 9/16" (14mm) diameter. Schaefer 08 SS Block has 5/16" forged Shackle and a 2750 lb. safe working load.

Large Swivel Block w/ 3 1/4" Aluminum Sheave: NGA-43SSA: Large SS Block with 3 1/4" (82mm) diameter Aluminum sheave will accommodate wire up to 1/4" diameter and line up to 5/8" (16mm) diameter. Schaefer Series 10 SS Block has 3/8" forged Shackle and a 3750 lb. safe working load.

Spars, Rigging, and Hardware for Sailboats