Spars, Rigging, and Hardware for Sailboats
|Z-Spar (Z-Diffusion) is one of the largest Spar Builders in
the world and operates a large facility in France. Over the past 20 years they have
supplied spars to several US Boatbuilders, notably Hunter, Beneteau, and O'Day, as
well as many major European builders.
Rig-Rite is able to offer a large variety of original Z-Spar Spars
and Parts, from stock, for delivery anywhere in the world.
Please Note: For a short time Z-Spar owned the Isomat facility in the US. Spars produced in the US from 1996 to March 1998 were labeled Z-Spars, though they were actually produced with a mixture of Sections and Parts from Isomat, Sparcraft and Z-Spar.
|Rig-Rite stocks a large selection of Z-Spar Parts. Technical data and
descriptions of most common Z-Spar Parts and Spar Sections are on-site, many with
Most common Mast Replacement Parts are listed by Category, See:
Most common Boom and Spreader Parts are listed underneath the Boom, or Spreader Section that they attach to. To find the part you need, first, determine which Boom or Spreader Section the part attaches to by measuring the Boom or Spreader Section. Then, click on that Section. Descriptions, specifications, and, in many cases photos are displayed there. Frequent changes in boat models and specifications, constant design improvements, and numerous other variations, make it impossible for us to know exactly which Spar Sections you have on your boat, and what parts you need. See:
Some parts are not specific to any particular Spar Section, and have their own pages, listed below.
If a part you require is not listed, please contact us with full details including which Mast, Boom, or Spreader Section the part attaches to. Please remember that Spar Parts are not specific to a particular Boat, but to the Spar Section to which they attach. For all parts not listed it will be necessary for you to identify, or provide measurements of, the Mast, Boom, or Spreader Section that the part fits (see Z-Spar Mast Sections, Z-Spar Boom Sections, or Z-Spar Spreader Sections), as well as a complete description of the part.
In addition, Please note the following:
2. There are many parts that are not listed here. If your part is not, it will be necessary
for you to provide measurements of the Mast, Boom, or Spreader Section that the part fits, as well as a
complete description of the part with measurements, or its nearest equivalent on the website.
We now have technical data and descriptions of most common Z-Spar Spar Sections and Parts on-site, and are continually adding more parts and pictures.
For Part Numbers, Data and Specifications, See: Z-Spar Replacement Parts.
For Parts Pricing information, See Ordering/Pricing, you will need Part Numbers.
For Technical Assistance and Data not listed on our website, See Z-Spar Technical. For any inquiries without Part Numbers, we will need to know which Spar Section(s) the part attaches to, and a sketch of the part with dimensions, in addition to all boat details, including model, length, and year of manufacture. Please Note: Because of frequent changes in boat models, constant design improvements, and numerous other variations, it is impossible for us to know exactly which Spar Sections you have on your boat, and what parts you need. If you are unable to determine your Spar Section from the data on-site, we can do so if you forward a tracing of the Section and its Maximum Outside Dimensions. Please remember that Spar Parts are not specific to a particular Boat, but to the Spar Section to which they attach. (See Z-Spar Mast Sections, Z-Spar Boom Sections, or Z-Spar Spreader Sections).
For a quote on a complete Z-Spar Replacement Spar, See Z-Spar Spar Quote.
To place an Order, See Ordering/Pricing, you will need Part Numbers.
~ Back to Spars Main Page ~
~ Back to Rig-Rite Home Page ~