Z-Spar Mast Steps

Z-Spar has produced an incredible variety of cast aluminum Standard and Tabernacle (hinged) Mast Steps, many of which are not listed here. If you require a Mast Step not listed below, please specify Mast Section and Mast Step description when inquiring.
New-Style Tabernacle Deck Plates and Mast Feet Old-Style Tabernacle Deck Plates and Mast Feet Standard Mast Steps

New-Style Tabernacle Deck Plates and Mast Feet
Deck Plate for Tabernacle Mast Step w/ 1/4" Pin: Z-1100A: Cast aluminum Deck Plate for use with Tabernacle Mast Foot on Z145, Z170, and Z190 Mast Sections. Features holes on each side for use with Z-261, Z-272 and Z-300 turning blocks, or Z-300SA Block Studs. Mast Foot hinges on 6mm pin (Z-1719), included, which goes through holes on aft side of Deck Plate. Deck Plate measures 4 7/8" (124mm) long, by 4 1/4" (108mm) wide and fastens to deck with (4) 1/4" (6mm) FH screws.
	Tabernacle Hinge Pin – 6mm (1/4"): Z-1719: SS Hinge Pin for use with Z-1100 Deck Plate is 6mm (1/4") diameter.
Tabernacle Mast Foot for Z145: Z-1397: Cast aluminum Mast Foot for Z145 section hinges on 6mm pin (Z-1719) which goes through holes on aft side of Z-1100 Deck Plate.
Tabernacle Mast Foot for Z170: Z-1095: Cast aluminum Mast Foot for Z170 section hinges on 6mm (1/4") pin (Z-1719) which goes through holes on aft side of Z-1100 Deck Plate.
Tabernacle Mast Foot for Z190 - Small: Z-1096: Cast aluminum Mast Foot for Z190 section hinges on 6mm (1/4") pin (Z-1719) which goes through holes on aft side of Z-1100 Deck Plate. Unit is (maximum) 5" (127mm) long x 3 1/4" (82mm) wide.

Deck Plate for Tabernacle Mast Step w/ 5/16" Pin: Z-1101A: Cast aluminum Deck Plate for use with Tabernacle Mast Foot on Z190, Z230 and Z265 Mast Sections. Features holes on each side for use with Z-261 and *Z-300* turning blocks. Mast Foot hinges on 8mm (5/16") pin (*Z-1316*), included, which goes through holes on aft side of Deck Plate. Deck Plate measures 6" (152mm) long, by 5 1/8" (130mm) wide and fastens to deck with (4) 1/4" (6mm) FH screws.
	Tabernacle Hinge Pin – 8mm (5/16"): Z-1316: SS Hinge Pin for use with Z-1101 Deck Plate is 8mm (5/16") diameter.
Tabernacle Mast Foot for Z190 - Large: Z-1171: Large cast aluminum Mast Foot for Z190 section hinges on 8mm (5/16") pin (Z-1316) which goes through holes on aft side of *Z-1101* Deck Plate. Unit is (maximum) 5 1/4" (134mm) long x 3 1/4" (82mm) wide.
Tabernacle Mast Foot for Z230: Z-1097: Cast aluminum Mast Foot for Z230 section hinges on 8mm (5/16") pin (Z-1316) which goes through holes on aft side of Z-1101 Deck Plate.
Tabernacle Mast Foot for Z230E: Z-4001: Cast aluminum Mast Foot for Z230E furling mast section hinges on 8mm (5/16") pin (*Z-1316) which goes through holes on aft side of Z-1101* Deck Plate.
Tabernacle Mast Foot for Z265: Z-1098: Cast aluminum Mast Foot for Z265 section hinges on 8mm (5/16") pin (*Z-1316) which goes through holes on aft side of Z-1101* Deck Plate.

Old-Style Tabernacle Deck Plates and Mast Feet w/ Sheaves Old-Style Mast Feet with integral sheaves have been obsoleted. Some sizes and angles are available on a limited basis.
*Old-Style Deck Plate for Z145/Z190 Mast Foot w/ Sheaves: Z-1112:* Aluminum Deck Plate fits Z145 and Z190 Mast Feet with Sheaves. Cast Plate measures 97mm (3 13/16") long (on deck) x 60mm (2 5/16") wide, with vertical rib, and slot on aft side for 6mm pin. Attaches to deck with (4) 6mm (1/4") FH screws. * 30-222
Mast Foot with Sheaves for Z145: Z-145SF-20:
Mast Foot with Sheaves for Z145: Z-145SF-30:
Mast Foot with Sheaves for Z145: Z-145SF-210:
Mast Foot with Sheaves for Z145: Z-145SF-10/245:
Mast Foot with Sheaves for Z145: Z-145SF-10/290:
Mast Foot with Sheaves for Z170: Z-170SF-30:

Mast Foot with Sheaves for Z190: Z-190SF-30:
Mast Foot with Sheaves for Z190: Z-190SF-210:
Mast Foot with Sheaves for Z190: Z-190SF-10/245:
Mast Foot with Sheaves for Z190: Z-190SF-10/260:
Mast Foot Replacement Kit for Z145: Z-145SF-SKit:
Mast Foot Replacement Kit for Z170: Z-170SF-SKit:
Mast Foot Replacement Kit for Z190: Z-190SF-SKit: Replacement Kit for Old-Style Mast Feet includes Z-1100A Deck Plate, above, with special high-density Spacer, and the proper size Mast Foot to go with it. This arrangement eliminates the need to shorten rigging with the New-Style Tabernacle, but requires a separate Exit Plate, Z-3273, and Turning Block, Z-261, Z-272, or Z-300, or Z-300SA Block Stud, (order separately) for each sheave that was used in the Old-Style Mast Foot. Attaches to deck with (4) 6mm (1/4") FH screws using original hole spacing. To order, specify Mast Section.

Old-Style Deck Plate for Z230, Z260 Mast Foot w/ Sheaves: Z-1112L:
Aluminum Deck Plate fits Z230 and Z260 Mast Feet with Sheaves. Cast Plate measures 138mm (5 7/16") long x 78mm (3 1/16") wide, with vertical rib and horizontal SS 8mm pin. Attaches to deck with (4) 6mm (1/4") FH screws.
Mast Foot with Sheaves for Z230: Z-230SF-10/270:
Mast Foot with Sheaves for Z260: Z-260SF-30: Mast Foot with Sheaves for Z260: Z-260SF-10/230: Mast Foot with Sheaves for Z260: Z-260SF-10/260:
*Old-Style Deck Plate for Z260 Mast Foot w/ Sheaves: Z-1175X:* Aluminum Deck Plate to fit old-style Z260 and other Mast Feet with Sheaves. Cast Plate measures 160mm (6 5/16") long x 120mm (4 3/4") wide x 22mm (7/8") thick, with fore and aft slot to accept rib in mast foot, and slot in aft side for 6mm hinge pin. Attaches to deck with up to (8) 6mm (1/4") FH screws. Please note that the *Z260* Mast Foot with Sheaves, that fits this Deck Plate, is no longer available. As used on early O'Day 272's. *

Standard Mast Steps Standard Mast Steps do not hinge and are available in a variety of configurations for Deck and Keel-mounted applications. Listed below are a few of the many Standard Mast Steps available. If you require a Mast Step not listed here, please contact us with details, including which Mast Section you have.
Mast Foot for Z125: Z-1179: Cast aluminum Mast Foot for Z125 Mast Section is attached to mast. Rectangular bottom has Slot 2 1/4" long x 3/8" wide (59mm x 10mm) for use with Z-1111 Mast Step Tenon. Unit is (maximum) 3 1/8" (79mm) long x 2 7/16" (62mm) wide, and projects 1 3/4" (45mm) beyond the end of the mast. Unit is attached to mast with (2) 3/16" (5mm) rivets or screws.
Mast Foot w/ Sheaves for Z125: Z-1179S: Cast aluminum Mast Foot for Z125 Mast Section is attached to mast, and is as Z-1179, above, but with 2 Sheaves allowing 2 internal lines to be led out through the foot (1 forward and 1 aft). Rectangular bottom has Slot 2 1/4" long x 3/8" wide (59mm x 10mm) for use with Z-1111 Mast Step Tenon. Unit is (maximum) 3 1/8" (79mm) long x 2 7/16" (62mm) wide, and projects 1 3/4" (45mm) beyond the end of the mast. Unit is attached to mast with (2) 3/16" (5mm) rivets or screws. mill
Mast Step for Z230 & Z290: Z-1170: Plain cast aluminum Mast Step for Z230 and Z290 Mast Sections. Unit is 5 7/8" (150mm) long x 4 1/2" (115mm) wide, and fastens to deck or keel with (4) 1/4" (6mm) FH screws.
Mast Step for Z300E: Z-4006: Cast aluminum Mast Step for Z300E Furling Mast Section. Features 8mm holes with (8) nut-slots for use with standard Z-Spar Mast Base Turning Blocks, and aft slot for vang bail. Unit is (maximum) 8 7/16" (215mm) long x 6 5/16" (160mm) wide, and fastens to deck with (4) 1/4" (6mm) FH screws.
Mast Step for Z301, Z320, & Z351: Z-1103: Cast aluminum Mast Step for Z301, Z320 and Z351 Mast Sections. Features 8mm holes with (8) nut-slots for use with standard Z-Spar Mast Base Turning Blocks, and aft slot for vang bail. Unit is (maximum) 8 7/16" (215mm) long x 6 5/16" (160mm) wide and fastens to deck with (4) 1/4" (6mm) FH screws. Note: Early versions of this unit had (6) holes for 10mm block studs, and are still available - order part # Z-1103X.
Mast Step for Z401: Z-3135: Cast aluminum Mast Step for Z401 Mast Section. Features 10mm holes with nut-slots for use with standard Z-Spar Mast Base Turning Blocks. Fastens to deck with (4) 1/4" (6mm) FH screws. Note: This is one of several different units that may be labeled 1110.
Mast Step for Z401 with Vang Bail Slot: Z-3135B: Cast aluminum Mast Step for Z401 Mast Section with slot for pivoting vang bail. Features 10mm holes with nut-slots for use with standard Z-Spar Mast Base Turning Blocks. Fastens to deck with (4) 1/4" (6mm) FH screws. Note: This is one of several different units that may be labeled 1110. a4032
Mast Step for Z600, Z601 - Keel Mount: Z-5157: Heavy cast aluminum Mast Step for Z600 and Z601 keel stepped masts. Features 14mm hole on aft side with nut-slot recess underneath for use with Deck Tie Rod. Fastens to keel with (4) 3/8" (10mm) bolts.
Mast Step for Z700, Z701 - Keel Mount: Z-5158: Heavy cast aluminum Mast Step for Z700 and Z701 keel stepped masts. Features 14mm hole on aft side with nut-slot recess underneath for use with Deck Tie Rod. Fastens to keel with (4) 3/8" (10mm) bolts.
Mast Step for Z800, Z801 - Keel Mount: Z-5159: Heavy cast aluminum Mast Step for Z800 and Z801 keel stepped masts. Features 14mm hole on aft side with nut-slot recess underneath for use with Deck Tie Rod. Fastens to keel with (4) 3/8" (10mm) bolts.
Mast Step for Z900, Z901 - Keel Mount: Z-5160: Heavy cast aluminum Mast Step for Z900 and Z901 keel stepped masts. Features 14mm hole on aft side with nut-slot recess underneath for use with Deck Tie Rod. Fastens to keel with (4) 3/8" (10mm) bolts. a1160

Spars, Rigging, and Hardware for Sailboats