Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions

Z-SPAR Mast Specifications & Components


Z-SPAR Mast Components
Most common Mast replacement parts are listed by Component Type. In most cases measurements from your existing parts will be required to determine the correct part number, in some cases you will need to determine which Mast Section the part attaches to (by measuring), See Z-SPAR Mast Sections, below.
See also Z-Spar Booms, and Z-Spar Spreaders.
 
  Mastheads - for Masthead Rigs
  Mastheads - for Fractional Rigs
Masthead Spinnaker Bails
Masthead Stemball / Eye Adapters
Backing Plate Tangs
Forestay/Staysail Tangs
Diamond Struts for Catamarans
Jib Boxes for Fractional Rigs
Exit Blocks
Spreader Bases - See Spreader Sections
Spinnaker Cars
Spinnaker Pole / Mast Eyes
Mainsail Gates & Luff Feeder
Full Batten Cars & Tracks
 
Sheaves
Halyard Exit Plates
Single Line Reef Fairleads
5
Gooseneck & Vang Brackets
Gooseneck Toggles
Booms
Spar Cleats
Winch Pads
Vang Toggles
Mast Base Turning Blocks
Mast Boots
Deck Collars
  Mast Steps - Standard
  Mast Steps - Hinged
 

Z-SPAR Mast Specifications

Listed below are current Z-Spar Mast Sections. Many older Mast Sections are not listed here, parts for some of them are still available. Please specify description and Mast Section dimensions when inquiring.

Z-SPAR Standard Mast Sections

Mast Section Maximum External Dimensions Sail Slides Spin Track
Z105* 72mm x 57mm - (2 7/8" x 2 1/4") 8mm round slugs or boltrope -
Z106* 72mm x 57mm - (2 7/8" x 2 1/4") 8mm round slugs or boltrope -
Z125* 76mm x 62mm - (3" x 2 1/2") 8mm round slugs or boltrope -
Z145 81mm x 68mm - (3 3/16" x 2 5/8") 8mm round slugs or boltrope -
Z170 98mm x 68mm - (3 7/8" x 2 5/8") 8mm round slugs or boltrope -
Z190 108mm x 78mm - (4 1/4" x 3 1/16") 8mm round slugs or boltrope -
Z230 122mm x 82mm - (4 3/4" x 3 1/4") 8mm round slugs or boltrope -
Z260* 142mm x 95mm - (5 5/8" x 3 3/4") HA 89 slides wide
Z265 143mm x 96mm - (5 5/8" x 3 3/4") 8mm round slugs or boltrope -
Z290* 115mm x 78mm - (4 1/2" x 3 1/16") 8mm round slugs or boltrope -
Z301* 160mm x 105mm - (6 1/4" x 4 1/8") HA 89 slides insert
Z320* 160mm x 105mm - (6 1/4" x 4 1/8") HA 89 slides wide
Z351 160mm x 105mm - (6 1/4" x 4 1/8") 8mm round slugs or boltrope -
Z380* 134mm x 90 mm - (5 1/4" x 3 9/16") 8mm round slugs or boltrope -
Z400* 178mm x 118mm - (7" x 4 5/8") HA 89 slides wide
Z401 179mm x 119mm - (7 1/16" x 4 11/16") 10mm round slugs or boltrope -
Z520* 185mm x 125mm - (7 1/4" x 4 15/16") HA 89 slides wide
Z500*      
Z501 189mm x 125mm - (7 7/16" x 4 15/16") HA 89 slides -
Z531 200mm x 124mm - (7 7/8" x 4 7/8") 10mm round slugs or boltrope insert
Z600*      
Z601 223mm x 138mm - (8 3/4" x 5 7/16") 10mm round slugs or boltrope insert
Z700*      
Z701 232mm x 145mm - (9 1/8" x 5 11/16") 10mm round slugs or boltrope insert
Z800* 236mm x 156mm - (9 5/16" x 6 1/8") HA 91 slides wide
Z900*      
Z901 255mm x 160mm - (10 1/16" x 6 5/16") HA 91 slides -
Z1001 290mm x 175mm - (11 7/16" x 6 7/8") HA 91 slides -
Z1250 310mm x 182mm - (12 3/16" x 7 3/16") Seasure 0462 -
Z1400 340mm x 200mm - (13 3/8" x 7 7/8") Seasure 0462 -
Z1600* 390mm x 230mm - (15 3/8" x 9 1/16") Seasure 0462 -

Z-Spar Furling Masts

Mast Section Maximum External Dimensions Luff Tape
Z230E* 124mm x 80mm - (4 7/8" x 3 1/8") 6mm   
Z300E* 160mm x 105mm - (6 5/16" x 4 1/8") 6mm 3
Z400E 183mm x 117mm - (7 3/16" x 4 5/8") 6mm 3
Z500E 200mm x 124mm - (7 7/8" x 4 7/8") 6mm 3
Z600E 220mm x 131mm - (8 11/16" x 5 3/16") 6mm 2
Z700E 231mm x 137mm - (9 1/8" x 5 3/8") 6mm 2
Z800E 243mm x 148mm - (9 9/16" x 5 13/16") 6mm 2
Z900E 255mm x 160mm - (10 1/16" x 6 5/16") 6mm 2
Z1100E 290mm x 175mm - (11 7/16" x 6 7/8") 6mm  
Z1400E 340mm x 200mm - (13 3/8" x 7 7/8") 6mm  
Z1600E* 390mm x 230mm - (15 3/8" x 9 1/16") 6mm  

~ Back to Z-Spar Main Page ~

~ Back to Rig-Rite Home Page ~