Zspar Gooseneck Toggles


Gooseneck Toggle w/ Tabs for Z160 Boom: Z-1188LX: Old-style cast aluminum Gooseneck Toggle incorporates a 12mm lug, top and bottom, which acts as a vertical pin. Used with 15mm OD plastic bushings (Z-1766) and (2) *Z-1061X* Gooseneck Brackets. Toggle is 23/32" (18.5mm) wide with 2 rectangular Tabs at 30° from the vertical for use with special slotted Boom end, and features center hole for use with Z-1188RH double Reef Hook. Toggle (with lugs) measures (maximum) 2 7/8" (73mm) vertical x 2 3/4" (68mm) horizontal x (maximum) 1 7/16" (36mm) wide at Tabs. 1188
Old-style Gooseneck Toggle w/ Integral Lugs, Small: Z-1188X: Old-style Gooseneck Toggle with integral 12mm lugs (top and bottom) which act as a vertical pin. Used with 15mm OD plastic bushings (Z-1766) and (2) *Z-1061X* Gooseneck Brackets. Cast Aluminum Toggle is 23/32" (18.5mm) wide with 10mm hole for horizontal pin, and features center hole for use with Z-1188RH double Reef Hook. Toggle (with lugs) measures (maximum) 2 7/8" (73mm) vertical x 2 3/4" (68mm) horizontal. Used with Mast Sections through Z320 with Z160 and Z204 Booms. As used on Beneteau First 285, and others. CK**
Old-style Gooseneck Toggle w/ Integral Lugs, Large: Z-1189X: Old-style Gooseneck Toggle with integral 16mm lugs (top and bottom) which act as a vertical pin. Used with 18mm OD plastic bushings (Z-1766L) and (2) Z-1190X Gooseneck Brackets. Toggle is 23/32" (18.5mm) wide with 10mm hole for horizontal pin, and features center hole for use with Z-1188RH double Reef Hook. Toggle (with lugs) measures (maximum) 3 3/8" (86mm) vertical x 2 7/8" (73mm) horizontal. Used with Z401, Z501, and other Mast Sections with Z204 and Z360 Booms. Appearance is as Z-1188X, above. 4151 CK**
Small Gooseneck Toggle w/ Shackle Attachment: Z-1034: Cast aluminum Gooseneck Toggle rides on an 8mm vertical pin. Toggle is 23/32" (18mm) wide with 10mm hole for horizontal pin, 6mm hole for tack shackle Z-1075TS, below, and can be used with Z-1188RH double Reef Hook. Portion that fits in Gooseneck Bracket is 2 3/16" (55mm) high, Toggle (overall) measures (maximum) 3 1/4" (84mm) vertical x 2 1/4" (56mm) horizontal x 23/32" (18mm) wide. For use with Z-1478 SS, and Z-1478C Aluminum Gooseneck Brackets. 1247
	*Reef Hook Assembly: Z-1188RH:* SS Double Reef Hook Assembly for use with Z-1188X, Z-1189X, and Z-1034X Gooseneck Toggles listed above. Double Reef Hook Assembly is formed from 8mm rod and measures (maximum) 4 1/8" (105mm) wide x 3 1/8" (80mm) high. Specially formed Reef Hook slides into center hole of Toggle, or Toggle slot and is held in place by vertical Toggle Pin.

Short Gooseneck Toggle for Z204 & Z360 Booms: Z-1083X: Cast aluminum Gooseneck Toggle rides on a 12mm vertical pin. Toggle is 3/4" wide at boom end with 10mm hole for horizontal pin, 6mm hole for tack shackle Z-1075TS, below, and can be used with *Z-1075RH* double Reef Hook. Portion that fits in Gooseneck Bracket is 2 1/16" (53mm) high, Toggle (overall) measures (maximum) 3 3/4" (97mm) vertical x 3 1/8" (80mm) horizontal x 1" (25mm) wide.
Gooseneck Toggle for Z204 & Z360 Booms: Z-1083: Cast aluminum Gooseneck Toggle rides on a 12mm vertical pin (Z-1291). Toggle is 3/4" wide at boom end with 10mm hole for horizontal pin, 6mm hole for tack shackle Z-1075TS, below, and can be used with *Z-1075RH* double Reef Hook. Portion that fits in Gooseneck Bracket is 2 3/4" (70mm) high, Toggle (overall) measures (maximum) 4 1/2" (114mm) vertical x 3 1/8" (80mm) horizontal x 1" (25mm) wide.
Gooseneck Toggle for Z204 & Z360 Booms: Z-1075X: Cast aluminum Gooseneck Toggle rides on a 12mm vertical pin (Z-1291). Toggle is 3/4" wide at boom end with 10mm hole for horizontal pin, 6mm hole for tack shackle Z-1075TS, below, and can be used with *Z-1075RH* double Reef Hook. Portion that fits in Gooseneck Bracket is 2 3/4" (70mm) high, Toggle (overall) measures (maximum) 4 1/2" (114mm) vertical x 3" (76mm) horizontal x 1 3/32" (28mm) wide.* 1074
	Tack Shackle: Z-1075TS: Special Tack Shackle to fit the Z-1075, Z-1083, and Z-1034 Gooseneck Toggles, above. Wide SS Shackle has 5mm (3/16") screw pin, inside of Shackle is 19mm (3/4") wide x 37mm (1 7/16") high. 15589
	Vertical Gooseneck Pin - 12mm: Z-1291: 12mm Vertical Gooseneck Pin is used with Z-1075, Z-1083, Z-1034 and other Gooseneck Toggles. SS Pin is 12mm (7/16") diameter x 118mm (4 5/8") long, with a hole for a cotter pin near the center which holds the Toggle in place.
	*Reef Hook Assembly: Z-1075RH:* SS Double Reef Hook Assembly for use with Z-1075, and Z-1083 Gooseneck Toggles listed above. Double Reef Hook Assembly is formed from 10mm rod and measures (maximum) 4 5/8" (118mm) wide x 4 1/4" (108mm) high. Specially formed Reef Hook slides into center hole of Toggle, or Toggle slot and is held in place by vertical Toggle Pin. 1493

Gooseneck Toggle for Z480 Boom: Z-4010: Cast aluminum Gooseneck Toggle rides on a 12mm vertical pin (Z-1291). Toggle is 1 1/4" (31mm) wide with 10mm hole for horizontal pin, 6mm hole for special tack shackle (*Z-4010TS) and can be used with Z-4010RH* double Reef Hook. Portion that fits in Gooseneck Bracket is 3" (75mm) high, Toggle (overall) measures (maximum) 4 5/8" (118mm) vertical x 3 3/8" (87mm) horizontal.
	Wide Tack Shackle: Z-4010TS: Special Wide Tack Shackle to fit the Z-4010 Gooseneck Toggle. Wide SS Shackle has 6mm (1/4") screw pin, inside of Shackle is 32mm (1 1/4") wide.
	Vertical Gooseneck Pin - 12mm: Z-1291: 12mm Vertical Gooseneck Pin is used with Z-4010 and other Gooseneck Toggles. SS Pin is 12mm (7/16") diameter x 118mm (4 5/8") long, with a hole for a cotter pin near the center which holds the Toggle in place.
	*Reef Hook Assembly* *for Z4010 Gooseneck Toggle: Z-4010RH:* SS Double Reef Hook Assembly for use with Z-4010** Gooseneck Toggle. Double Reef Hook Assembly is formed from 10mm rod and measures (maximum) 5" (125mm) wide x 4" (100mm) high. Specially formed Reef Hook slides into center slot in Toggle, and is held in place by vertical Toggle Pin.

Gooseneck Toggle for Z601 thru Z1001 Booms: Z-1187: Heavy cast aluminum Gooseneck Toggle rides on a 14mm vertical pin. Toggle is 1 5/8" (41mm) wide at boom end with 14mm hole for horizontal pin. Toggle measures 3 1/8" (80mm) vertical x 3 1/2" (90mm) horizontal x (maximum) 1 5/8" wide.

Spars, Rigging, and Hardware for Sailboats