Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions

Z-SPAR Spar Cleats


Gray anodized aluminum (and Plastic!) Spar Cleats are used on a variety of Z-Spar masts.
Spar Cleat – Aluminum - 120mm: Z-1145:
Aluminum Spar Cleat is 120mm (4 5/8") long x 20mm (3/4") wide, and fastens with (2) 5mm (3/16") fasteners on 30mm (1 3/16") hole centers. Installed in the factory with a special deep-nosed rivet tool, can also be installed with machine screws.   

Z-1145
Spar Cleat – Plastic - 120mm: Z-1145P:
Gray Plastic Spar Cleat is 120mm (4 5/8") long, and fastens with (2) 5mm (3/16") fasteners on 30mm (1 3/16") hole centers. Installed in the factory with a special deep-nosed rivet tool, can also be installed with machine screws. Not recommended for any but the lightest of applications.

 

 
Spar Cleat – Aluminum - 170mm: Z-1081:
Aluminum Spar Cleat is 170mm (6 3/4") long x 30mm (1 3/16") wide, and fastens with (2) 6mm (1/4") fasteners on 45mm (1 3/4") hole centers. Installed in the factory with a special deep-nosed rivet tool, can also be installed with machine screws. 

Z-1081
Spar Cleat – Plastic - 170mm: Z-1081P:
Gray Plastic Spar Cleat is 170mm (6 3/4") long x 25mm (1") wide, and fastens with (2) 6mm (1/4") fasteners on 45mm (1 3/4") hole centers. Installed in the factory with a special deep-nosed rivet tool, can also be installed with machine screws. Not recommended for any but the lightest of applications.

 

 
 
Four Hole Spar Cleat – Aluminum - 205mm: Z-1192:
Four Hole Aluminum Spar Cleat is 205mm (8 1/8") long, and fastens with (4) 6mm (1/4") fasteners on 60mm (2 3/8") x 42mm (1 5/8") hole centers. Rectangular base is 80mm x 56mm (3 1/8" x 2 1/4"). Installed in the factory with rivets, can also be installed with machine screws.
Z-1192

~ Back to Z-Spar Main Page ~

~ Back to Rig-Rite Home Page ~