 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Spreader Bases |
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Spreader Bases |
|
| Exit Plates | |
| SS Exit Plates are used to lead any control line
(internal halyards, pole lifts, etc.) through a spar wall, where No
directional change is required. An Exit Plate is installed in a slot, to prevent
the line going through it from coming in contact with the spar wall. This prevents any
abrasion of the spar wall, as well as minimizing chafe on the line. Suitable for use with
wire or rope, the Exit Plates listed below feature welded or formed bars to prevent chafe
on the interior mast wall, and smooth formed outer surfaces to reduce wear on all control
lines. Other Exit Plates are available for replacement or exact matching purposes. Depending on the kind of spars you have, See Kenyon Exit Plates, Isomat Exit Plates, Francespar Exit Plates, or Z-Spar Exit Plates. |
|
| Stainless Steel Exit Plate: K-10960SC: (curved) Stainless Steel Exit Plate: K-10960SF: (flat) Small SS Exit Plate is 3 1/4" long x 1 1/4" wide and will handle line up to 7/16" diameter. Assembly fits in mast cutout 2 3/8" high x 7/8" wide and fastens with (4) #10 (3/16") fasteners on 2 3/4" (vertical) x 3/4" (horizontal) hole centers. The K-10960SC is slightly curved to fit most Mast Sections, the K-10960SF is uncurved for use on flat-sided Sections. SD |
 |