 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Mast & Spreader Lights |
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Mast & Spreader Lights |
|
| Mast and Spreader Lights | ||
| SS Exit Plates are used to lead any control line
(internal halyards, pole lifts, etc.) through a spar wall, where No
directional change is required. An Exit Plate is installed in a slot, to prevent
the line going through it from coming in contact with the spar wall. This prevents any
abrasion of the spar wall, as well as minimizing chafe on the line. Suitable for use with
wire or rope, the Exit Plates listed below feature welded or formed bars to prevent chafe
on the interior mast wall, and smooth formed outer surfaces to reduce wear on all control
lines. Other Exit Plates are available for replacement or exact matching purposes. Depending on the kind of spars you have, See Kenyon Exit Plates, Isomat Exit Plates, Francespar Exit Plates, or Z-Spar Exit Plates. |
||
| Anchor Lights Bow/Steaming/Masthead Lights Combination Bow/Deck Lights Spreader/Deck Lights Windex Lights
|
||
| Anchor Lights | ||
| Anchor Light /Bow Light (round):
K-11019: When mounted horizontally on top of the Masthead the K-11019 functions as a 360 degree all-around Anchor Light. When mounted vertically on the forward face of the Mast it functions as a 20 point Bow/Steaming/Masthead Light. Round Stainless Steel base is 2 3/8" diameter and fastens with (3) #8 screws. Requires 3/4" hole for socket. When used as a Bow Light, a Base Pad is required to adapt this light to the curved Mast surface. Replacement Bulb: 12-volt, GE # 90.
|
||
| Bow Lights | ||
| Bow Light (round): SP-E964: Mounted horizontally (parallel to the deck) this Bow Light shines forward 20 points, and is used on Spartan Combination Bow/Foredeck Light Assemblies, and numerous other Mast brackets. Round Stainless Steel base is 2 3/8" diameter and fastens with (3) #6 screws. Requires 3/4" hole for socket. Replacement Bulb: 12-volt, GE # 90.
|
@SP | |
| Bow Light / Anchor Light (round):
K-11019: When mounted vertically on the forward face of the Mast the K-11019 functions as a 20 point Bow/Steaming/Masthead Light. When mounted horizontally on top of the Masthead it functions as a 360 degree all-around Anchor Light. Round Stainless Steel base is 2 3/8" diameter and fastens with (3) #8 screws. Requires 3/4" hole for socket. When used as a Bow Light, a Base Pad is required to adapt this light to the curved Mast surface. Replacement Bulb: 12-volt, GE # 90.
|
@K | |
| Bow Light / Anchor Light - Replacement Bulb:
SP-EB90: Replacement Bulb for SP-E264, and K-11019 Bow and Bow/Anchor Lights. 12-volt bulb is GE # 90.
|
||
| Bow Light Base Pad (round): K-9356-1: Black urethane mounting pad provides low-profile mount for K-11019 (or Perko 5686) bow light. Molded to fit 4060 mast section, pad is 2 3/8" dia. and fastens to mast with (3) #8 screws.
|
@K
|
|
| Bow Light Base Pad for SP-E964: PP
E964CBP: Cast Aluminum mounting pad provides mount for SP-E964 bow light. Molded to fit a variety of mast sections, pad is 3" in diameter with a 1 1/4" hole in center for SP-E964 bow light. Unit is undrilled so holes can be matched to existing pattern. As used on Bristol, Pearson and others.
|
||
| Bow Light: Perko 1331 K-9356-1: Black urethane mounting pad provides low-profile mount for K-11019 (or Perko 5686) bow light. Molded to fit 4060 mast section, pad is 2 3/8" dia. and fastens to mast with (3) #8 screws.
|
||
| Combination Bow/Deck Lights | ||
| Bow/Foredeck Light Assembly: SP-086: Combination Bow (Steaming) and Foredeck light, in cast aluminum housing fits forward side of CD-4 mast section. Foredeck light, SP-E265, is on bottom angled forward, and 20 point Bow light, SP-E964, is mounted on top. Assembly attaches to mast with (1) 1/4-20 x 3 1/2" FH machine screw (included). Replacement Bulb - Bow Light: 12-volt, GE # 90. Replacement Bulb - Deck Light: 12-volt, GE # 70.
|
@SP | |
| Bow Light - Replacement Bulb: SP-EB90: Replacement Bulb for SP-E264, and K-11019 Bow and Bow/Anchor Lights. 12-volt bulb is GE # 90.
|
||
| Foredeck Light - Replacement Bulb: SP-EB70: Replacement Bulb for SP-E265 Spreader Light. 12-volt bulb is GE # 70.
|
||
| Spreader/Deck Lights | ||
| Foredeck / Spreader Light (round):
SP-E265: Chrome plated Bronze Foredeck Light on plastic base illuminates the deck, and is used on Spartan Combination Bow/Foredeck Light Assemblies. Round base is 2 3/4" diameter and fastens with (2) #8 or #6 screws on 1 1/2" hole centers. Replacement Bulb: 12-volt, GE # 70.
|
@SP | |
| Foredeck / Spreader Light - Replacement Bulb:
SP-EB70: Replacement Bulb for SP-E265 Spreader Light. 12-volt bulb is GE # 70.
|
||
| Stainless Steel Spreader Light - Large -
Fixed: SP-E268: Large Sealed Beam Spreader Light in Fixed Stainless Steel housing. Designed for attachment to underside of Spreaders, bright 3000 Candlepower light illuminates large deck or cockpit areas. Uses large diameter (4 5/16") Sealed Beam 12-volt bulb (GE # 4411). SS Bulb housing is 4 1/2" OD, bulb projects 3" from mounting surface. SS Mounting Bracket is 6 1/4" long x 3/4" wide and fastens to underside of Spreader or platform with (2) 3/16" (#10) RH screws on 5 1/4" hole centers. Replacement Bulb: 12-volt, GE # 4411. sn405220
|
OK | |
| Stainless Steel Spreader Light - Large -
Swivel: SP-E269: Large Sealed Beam Spreader Light in Stainless Steel housing with Swiveling Gooseneck. Designed for attachment to underside of Spreaders, bright 3000 Candlepower light on Swivel can be adjusted (after attachment) to illuminate any deck or cockpit areas. Uses large diameter (4 5/16") Sealed Beam 12-volt bulb (GE # 4411). SS Bulb housing is 4 1/2" OD, bulb projects (minimum) 4 3/4" from mounting surface. SS Mounting Bracket is 5 1/4" long x 1 1/4" wide and fastens to underside of Spreader or platform with (4) 3/16" (#10) RH screws on 4 5/8" and 3" hole centers. Replacement Bulb: 12-volt, GE # 4411. sn405
|
OK | |
| Spreader Light - Replacement Bulb: K-EB4411: Replacement Sealed Beam Bulb for large Spreader Light. Large diameter (4 5/16") 3000 Candlepower, 12-volt bulb is GE # 4411.
|
||
| Large Deck Light: SP-E269 AQS: Large Sealed Beam Spreader Light in Stainless Steel housing with Swiveling Gooseneck. Designed for attachment to underside of Spreaders, bright 3000 Candlepower light on Swivel can be adjusted (after attachment) to illuminate any deck or cockpit areas. Uses large diameter (4 5/16") Sealed Beam 12-volt bulb (GE # 4411). SS Bulb housing is 4 1/2" OD, bulb projects (minimum) 4 3/4" from mounting surface. SS Mounting Bracket is 5 1/4" long x 1 1/4" wide and fastens to underside of Spreader or platform with (4) 3/16" (#10) RH screws on 4 5/8" and 3" hole centers. Replacement Bulb: 12-volt, GE # 4411. sn405
|
OK | |
| Spreader Light - Replacement Bulb: K-EB4411: Replacement Sealed Beam Bulb for large Spreader Light. Large diameter (4 5/16") 3000 Candlepower, 12-volt bulb is GE # 4411.
|
||
| Windex Lights | ||
| Windex Light: K-E???: Chrome plated Bronze Foredeck Light on plastic base illuminates the deck, and is used on Spartan Combination Bow/Foredeck Light Assemblies. Round base is 2 3/4" diameter and fastens with (2) #8 or #6 screws on 1 1/2" hole centers. Replacement Bulb: 12-volt, GE # 1447. D3200
|
||
| Windex Light - Replacement Bulb: K-EB???: Replacement Bulb for standard Windex Light, GE # 1447. |
||