Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com        Spartan Ordering/Questions

3/4" OD Round Spreaders & Hardware


Spartan Spars 3/4" Round Spreader Section - SP-022
Measurements: 3/4" OD x 5/8" ID
Wall Thickness: .058"
Weight/ft.: .148 lbs.
Alloy: 6061-T6
Stock Lengths: 2'2", 3', 6'
Common Boat usage: Cape Dory Typhoon Weekender (WE), Typhoon Day Sailer (DS);
3/4" x 5/8" round tube

3/4" OD Round Spreader Tube
3/4" Round Spreader Tube: SP-022TC-___:
Spartan 3/4" OD x 5/8" ID Spreader Tube (SP-022) is stocked in a clear anodized finish and is available in 2' 2" (TC-26" for CD Typhoon), 3', and 6' lengths, or can be cut to other lengths. To order: specify length.

 


3/4" OD Round Spreader Assemblies & Parts
3/4" Round Spreader Assembly x 26" long: SP-022AS:
Standard Spartan SP-022 Spreader is 3/4" OD x 5/8" ID x 26" long and has Aluminum Tip, SP-022T, with hole for seizing wire (included). Clear anodized Spreader Assembly is (maximum) 26 1/2" long. As used on Cape Dory Typhoon.

 

SP-022A

 

 

3/4" Round Spreader Assembly - Special: SP-022A-___:
Spartan SP-022 Spreader is 3/4" OD x 5/8" ID and has Aluminum Tip, SP-022T, with hole for seizing wire (included). Finished spreaders are available in any length, standard finish is clear anodized, specify color if painted finish is required. To order: specify maximum length from inboard tube end to shroud bearing surface, and finish.

 


3/4" Round Spreader Tip: SP-022T:
Clear anodized Aluminum Spreader Tip for 3/4" OD x 5/8" ID Spreader features slot for up to 3/16" diameter shroud. Lightweight, compact version replaces earlier Cast style and features cross-hole for seizing wire. New-style turned Tip extends shroud seat 5/16" beyond spreader tube, unit projects 9/16" (maximum) beyond spreader tube and is carefully rounded to reduce sail chafe.

 

Spreader Boot Pair for 3/4" OD Spreader: SP-022B:
Spreader Boot for 3/4" OD Spreader is designed to reduce sail chafe. White Rubber Boot is attached to Spreader and Shroud using wire ties or Rigging Tape. Sold in Pairs only, they are (maximum) 4 1/2" long.

 


Spreader Bases for 3/4" Round Spreaders
Spreader Base for 3/4" Round Spreader: SP-302:
Stainless Steel Spreader Base mounts flush on the side of the mast and attaches with (1) 1/4" and (1) 3/8" bolt, design allows for use of the 3/8" bolt as an attachment point for a lower shroud tang, commonly SP-209. Spreader Base incorporates a 5/8" male stud that the spreader fits over, Spreader is attached with a 1/4" Clevis Pin, K-CP4-28 (included). For use with 5/8" ID Spreaders, SP-022. Commonly used with Spartan CD-2 Mast Section. As used on Cape Dory Typhoon.
SP-302

~ Back to Spreaders Main Page ~

~ Back to Spartan Main Page ~

~ Back to Rig-Rite Home Page ~