Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com         Ordering/Questions

Single Clevis Tangs


Single Clevis Tangs
Clevis Tangs are used to attach rigging which uses eye fittings, and come with a Clevis Pin. Pivoting Tangs mount on a single bolt, with or without a Flange Bushing, while Fixed Tangs attach to the Mast with multiple fasteners. Larger Pivoting Tangs will, in many applications, require use of Flange Bushings and/or Tang Bearing Plates.
 

Pivoting Single Clevis Tangs
Pivoting Single Clevis Tangs are commonly used in Lower and Intermediate Shroud applications and are especially suitable for Running Backstays and other applications where the load angle can vary.
They mount on a single Bolt of the size indicated, or with a Flange Bushing and a smaller Bolt.

 

Clevis Tangs for 1/4" Bolt
 
Short Clevis Tang w/ 3/16" Pin: K-616A:
Lightweight SS Clevis Tang Assembly was designed for use with Shrouds up to 1/8" diameter with standard Eyes. Tang is 2" long x 3/4" wide x .062" with (1) 1/4" mounting hole and includes (1) 3/16" Clevis Pin. Tang Assembly mounts on a 1/4" bolt, hole centers are 1 5/16" apart. Used in a variety of applications.

 

 
Short Clevis Tang w/ 1/4" Pin: K-84-1104-4R:
Short Clevis Tang Assembly for use with Shrouds up to 5/32" diameter using standard Eyes. Tang is 2" long x 5/8" wide x .062" with (1) 1/4" mounting hole and includes (1) 1/4" Clevis Pin. Tang Assembly mounts on a 1/4" bolt; hole centers are 1 3/8" apart. Used in a variety of applications.

 

K-84-1106-4R

Clevis Tangs for 3/8" Bolt
 
Clevis Tang w/ 1/4" Pin: K-84-1106-4:
Clevis Tang Assembly for use with Shrouds up to 3/16" diameter using standard Eyes. Tang is 3 3/4" long x 1" wide x .086" with (1) 3/8" mounting hole and includes (1) 1/4" Clevis Pin. Tang Assembly mounts on a 3/8" bolt; hole centers are 2 3/4" apart. Used in a variety of applications.

 

 
Short Tapered Clevis Tang w/ 5/16" Pin: K-84-1106-5R:
Short Tapered Clevis Tang Assembly for use with Shrouds up to 3/16" diameter using standard Eyes. Tang is 2 1/2" long x (maximum) 1" wide x .062" with (1) 3/8" mounting hole and includes (1) 5/16" Clevis Pin. Tang Assembly mounts on a 3/8" bolt; hole centers are 1 1/2" apart. Used in a variety of applications.

 

K-84-1106-5R

Clevis Tangs for 1/2" Bolt
 
Short Clevis Tang w/ 7/16" Pin: RR 84-1108-7S:
SS Clevis Tang Assembly was designed for use with Shrouds up to 7/32" diameter using standard Marine Eyes. Short Tang is 4" long x 1 1/8" wide x .120" with (1) 1/2" mounting hole and includes (1) 7/16" Clevis Pin. Hole centers are 2 3/8" apart; Tang mounts on a 1/2" bolt.

 

Clevis Tang w/ 7/16" Pin: RR 84-1108-7C:
Contoured SS Clevis Tang Assembly was designed for use with Shrouds up to 7/32" diameter using standard Marine Eyes. Contoured Tang is 5" long x (maximum) 1 1/2" wide x .120" with (1) 1/2" mounting hole and includes (1) 7/16" Clevis Pin. Hole centers are 3 1/2" apart; Tang mounts on a 1/2" bolt.

 

Clevis Tang w/ 1/2" Pin: RR 84-1108-8C:
Contoured SS Clevis Tang Assembly was designed for use with Shrouds up to 9/32" diameter using standard Marine Eyes. Contoured Tang is 5" long x (maximum) 1 1/2" wide x .158" with (1) 1/2" mounting hole and includes (1) 1/2" Clevis Pin. Hole centers are 3 1/2" apart; Tang mounts on a 1/2" bolt.

 


Clevis Tangs for 5/8" Bolt
 
Clevis Tang w/ 1/2" Pin: RR 84-1110-8C:
Contoured SS Clevis Tang Assembly was designed for use with Shrouds up to 9/32" diameter using standard Marine Eyes. Contoured Tang is 5" long x (maximum) 1 1/2" wide x .158" with (1) 5/8" mounting hole and includes (1) 1/2" Clevis Pin. Hole centers are 3 1/2" apart; Tang mounts on a 5/8" bolt. DO

 

Clevis Tang w/ 5/8" Pin: RR 84-1110-10C:
Contoured SS Clevis Tang Assembly was designed for use with Shrouds up to 3/8" diameter using standard Marine Eyes. Contoured Tang is 6 1/2" long x (maximum) 1 3/4" wide x .158" with (1) 5/8" mounting hole and includes (1) 5/8" Clevis Pin. Hole centers are 4 1/2" apart; Tang mounts on a 5/8" bolt.

 


Clevis Tangs for 3/4" Bolt
 
Tapered Clevis Tang w/ 1/2" Pin - 3/4" hole: RR 84-1112-8:
Tapered SS Clevis Tang Assembly was designed for use with Shrouds up to 9/32" diameter using standard Marine Eyes. Tang is 5 1/4" long x 1 1/2" wide x 1/8" (.120") with (1) 3/4" mounting hole and includes (1) 1/2" Clevis Pin. Hole centers are 3 1/4" apart. Can be mounted on a 3/4" bolt, or with Flange Bushings (K-10455) and a 1/2" bolt for applications where weight is a concern. PP

 

Clevis Tang w/ 1/2" Pin: RR 84-1112-8C:
Contoured SS Clevis Tang Assembly was designed for use with Shrouds up to 9/32" diameter using standard Marine Eyes. Contoured Tang is 5" long x (maximum) 1 1/2" wide x .158" with (1) 3/4" mounting hole and includes (1) 1/2" Clevis Pin. Hole centers are 3 1/2" apart; Tang mounts on a 3/4" bolt. DO

 

Clevis Tang w/ 5/8" Pin: RR 84-1112-10C:
Contoured SS Clevis Tang Assembly was designed for use with Shrouds up to 3/8" diameter using standard Marine Eyes. Contoured Tang is 6 1/2" long x (maximum) 1 3/4" wide x .158" with (1) 3/4" mounting hole and includes (1) 5/8" Clevis Pin. Hole centers are 4 1/2" apart; Tang mounts on a 3/4" bolt.

 

Heavy Clevis Tang w/ 5/8" Pin: K-10784A:
Heavy SS Clevis Tang Assembly was designed for use with Shrouds up to 3/8" diameter using standard Marine Eyes. Tang is 7 1/2" long x (maximum) 2" wide x 3/16" (.186") with (1) 3/4" mounting hole and includes (1) 5/8" Clevis Pin. Hole centers are 5 1/4" apart. Can be mounted on a 3/4" bolt, or with Flange Bushings (K-10455) and a 1/2" bolt for applications where weight is a concern.

 

Clevis Tang w/ 3/4" Pin: K-11157A:
Heavy SS Clevis Tang Assembly was designed for use with Shrouds up to 7/16" diameter using standard Marine Eyes. Tang is 7 1/2" long x (maximum) 2" wide x 3/16" (.186") with (1) 3/4" mounting hole and includes (1) 3/4" Clevis Pin. Hole centers are 5 1/4" apart. Can be mounted on a 3/4" bolt, or with Flange Bushings (K-10455) and a 1/2" bolt for applications where weight is a concern. These tangs should be used with SS Bearing Plates or other mast wall reinforcement in all standard applications.

 


Kenyon 'Dog-Bone' Pivoting Tangs
‘Dog-Bone’ Clevis Tang w/ 1/4" Pin: K-1490:
Lightweight SS ‘Dog-Bone’ Shroud Tang Assembly was designed for use with Shrouds up to 5/32" diameter with standard Eyes. Stamped ‘Dog-Bone’ Design reduces weight and windage to a minimum. Tang is 4" long x (maximum) 1" wide x .090" with (1) 1/2" mounting hole and includes (1) 1/4" Clevis Pin. Hole centers are 3" apart. Can be mounted on a 1/2" bolt, or with Flange Bushings (K-9630) and a 5/16" bolt for applications where weight is a concern.

 

‘Dog-Bone’ Clevis Tang w/ 5/16" Pin: K-1491:
Lightweight SS ‘Dog-Bone’ Shroud Tang Assembly was designed for use with Shrouds up to 3/16" diameter with standard Eyes. Stamped ‘Dog-Bone’ Design reduces weight and windage to a minimum. Tang is 4" long x (maximum) 1" wide x .090" with (1) 1/2" mounting hole and includes (1) 5/16" Clevis Pin. Hole centers are 3" apart. Can be mounted on a 1/2" bolt, or with Flange Bushings (K-9630) and a 5/16" bolt for applications where weight is a concern.

 


‘Dog-Bone’ Clevis Tang w/ 3/8" Pin: K-1492:
Lightweight SS ‘Dog-Bone’ Shroud Tang Assembly was designed for use with Shrouds up to 3/16" diameter with standard Marine Eyes. Stamped ‘Dog-Bone’ Design reduces weight and windage to a minimum. Tang is 5" long x (maximum) 1 3/8" wide x .090" with (1) 11/16" mounting hole and includes (1) 3/8" Clevis Pin. Hole centers are 3 5/8" apart. Can be mounted on a 5/8" bolt, or with Flange Bushings (K-9631) and a 3/8" bolt for applications where weight is a concern.

 

‘Dog-Bone’ Clevis Tang w/ 7/16" Pin: K-1493:
Lightweight SS ‘Dog-Bone’ Shroud Tang Assembly was designed for use with Shrouds that are 7/32" diameter with standard Marine Eyes. Stamped ‘Dog-Bone’ Design reduces weight and windage to a minimum. Tang is 5" long x (maximum) 1 3/8" wide x 9/64" (.140") with (1) 11/16" mounting hole and includes (1) 7/16" Clevis Pin. Hole centers are 3 5/8" apart. Can be mounted on a 5/8" bolt, or with 11/16" Flange Bushings (K-9631) and a 3/8" bolt for applications where weight is a concern.

 

‘Dog-Bone’ Clevis Tang w/ 1/2" Pin: K-1494:
Lightweight SS ‘Dog-Bone’ Clevis Tang Assembly was designed for use with Shrouds up to 9/32" diameter using standard Marine Eyes. Stamped ‘Dog-Bone’ Design reduces weight and windage to a minimum. Tang is 5" long x (maximum) 1 3/8" wide x 9/64" (.140") with (1) 11/16" mounting hole and includes (1) 1/2" Clevis Pin. Hole centers are 3 5/8" apart. Can be mounted on a 5/8" bolt, or with Flange Bushings (K-9631) and a 3/8" bolt for applications where weight is a concern.

 


 

Fixed Single Clevis Tangs
Fixed Single Clevis Tangs are especially suitable for use in Upper Shroud applications as the multiple fasteners allow no fore and aft movement, they are also suited for other applications where the tang should not be allowed to pivot.

 

Fixed Clevis Tang w/ 3/16" Pin: K-616AFR:
SS Clevis Tang Assembly was designed for use with Shrouds up to 1/8" diameter with standard Eyes. Tang is 3" long x 1/2" wide x .062" with (2) 3/16" mounting holes and includes (1) 3/16" Clevis Pin. Tang Assembly mounts with (2) 3/16" (10) fasteners, mounting hole centers are 1 3/8" apart. Used in a variety of applications.

 


Fixed Clevis Tang w/ 7/16" Pin: RR 84-1208-7A:
SS Upper Shroud Tang Assembly was designed for use with Shrouds up to 7/32" diameter using standard Marine Eyes. Tang is 7" long x 1 5/16" wide x .105" with (2) 1/2" mounting holes and includes (1) 7/16" Clevis Pin. Tang Assembly mounts with (2) 1/2" bolts on 2" centers; Pin center is 3 5/8" from lower bolt.

 


Fixed Clevis Tang w/ 1/2" Pin: RR 84-1208-8A:
SS Upper Shroud Tang Assembly was designed for use with Shrouds up to 9/32" diameter using standard Marine Eyes. Tang is 7" long x 1 5/16" wide x .105" with (2) 1/2" mounting holes and includes (1) 1/2" Clevis Pin. Tang Assembly mounts with (2) 1/2" bolts on 2" centers; Pin center is 3 5/8" from lower bolt.

 

Fixed Clevis Tang w/ 1/2" Pin: RR 84-1208-8LAV:
SS Upper Shroud Tang Assembly was designed for use with Shrouds up to 9/32" diameter using standard Marine Eyes. Tang is 8" long x 1 1/2" wide x .109" with (2) 1/2" mounting holes and includes (1) 1/2" Clevis Pin. Tang Assembly mounts with (2) 1/2" bolts on 2 1/4" centers; Pin center is 4 1/4" from lower bolt.

 

Fixed Clevis Tang w/ 1/2" Pin: SP-206:
SS Upper Shroud Tang Assembly was designed for use with Shrouds up to 9/32" diameter using standard Marine Eyes. Tang is 6 7/8" long x 1 1/4" wide x .120" with (1) 1/2", and (1) 3/8" mounting hole and includes (1) 1/2" Clevis Pin. Tang Assembly mounts with (1) 1/2" bolt and (1) 3/8" bolt on 1 7/16" centers; Pin center is 4" from lower bolt.

 

SP-206
Fixed Clevis Tang w/ 1/2" Pin: RR 84-1508-8M:
SS Fixed Clevis Tang Assembly was designed for use with Shrouds up to 9/32" diameter using standard Marine Eyes. Original S&S Design Contoured Tang is 6 3/4" long x 1 3/8" (maximum) wide x .120" with (4) 1/4" (upper) and (1) 1/2" (lower) mounting holes. Pin center is 3 3/8" from lower mounting hole. Mounts with (4) 1/4" screws and (1) 1/2" bolt, and includes (1) 1/2" Clevis Pin.

 

RR 84-1508-8M

Fixed Clevis Tang w/ 5/8" Pin: RR 84-1608-10:
SS Fixed Clevis Tang Assembly was designed for use with Shrouds up to 3/8" diameter using standard Marine Eyes. Original S&S Design Tapered Tang is 9" long x 3/4" wide (at top) x 1 5/8" wide (at bottom) x .120" with (5) 1/4" (upper) and (1) 1/2" (lower) mounting holes. Pin center is 3 3/4" from lower mounting hole. Mounts with (5) 1/4" screws and (1) 1/2" bolt, and includes (1) 5/8" Clevis Pin.

 

Fixed Clevis Tang w/ 5/8" Pin: RR 84-1510-10M:
SS Fixed Clevis Tang Assembly was designed for use with Shrouds up to 3/8" diameter using standard Marine Eyes. Original S&S Design Contoured Tang is 9" long x 1 3/4" (maximum) wide x .120" with (4) 1/4" (upper) and (1) 5/8" (lower) mounting holes. Pin center is 3 3/4" from lower mounting hole. Mounts with (4) 1/4" screws and (1) 5/8" bolt, and includes (1) 5/8" Clevis Pin.

 


Fixed Clevis Tang w/ 3/4" Pin: K-74112:
Heavy SS Clevis Tang Assembly was designed for use with Shrouds up to 7/16" diameter using standard Marine Eyes. Tang is 13 3/4" long x 2 1/2" wide x 3/16" (.186") with (8) 5/16" (upper) and (1) 7/8" (lower) mounting holes. Pin center is 6 1/4" from lower mounting hole. Mounts with (8) 5/16" FH screws and (1) 7/8" bolt, and includes (1) 3/4" Clevis Pin.

 

K-74112

~ Back to Tangs Main Page ~

~ Back to Rig-Rite Home Page ~