Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions

Rod Stemball Tangs


Heavy-duty Forged Aluminum Rod Tangs for use with Rod Rigging Stemballs mount internally. Tangs are designed to fit through the mounting slot and are then fastened from the outside.
See also, Tangs Main Page.

Schaefer Rod Stemball Tangs

Navtec Rod Stemball Tangs

SeaRig SS Rod Stemball Tangs
 


Schaefer Rod Stemball Tangs
Heavy-duty Forged Aluminum Rod Tangs for use with standard Rod Rigging Stemballs mount internally, flush with the surface of the mast. These unique Tangs allow the Rod Rigging to be inserted in or removed from the mast without removing the Tang. Stemballs are inserted perpendicular to the Mast and pushed up to seat in the Tang body. Tangs are designed to fit through the mounting slot and are then fastened from the outside.

 

Rod Stemball Tang for -4 Rod: Sch 84-60-4:
Forged Aluminum Rod Stemball Tang for -4 Rod using standard (.48" OD) Rod Stemballs. Mounts internally in mast cutout 2 13/16" (72mm) high x 3/4" (20mm) wide using (2) 3/16" (5mm) rivets. Mounting surface is slightly curved to fit a variety of mast surfaces. Tang is 3 15/16" long x 1" wide, hole is .495" diameter.

 

Sch 84-60-6

Rod Stemball Tang for -6 Rod: Sch 84-60-6:
Forged Aluminum Rod Stemball Tang for -6 Rod using standard (.48" OD) Rod Stemballs. Mounts internally in mast cutout 2 13/16" (72mm) high x 3/4" (20mm) wide using (2) 3/16" (5mm) rivets. Mounting surface is slightly curved to fit a variety of mast surfaces. Tang is 3 15/16" long x 1" wide, hole is .575" diameter.

 

Rod Stemball Tang for -8 & -10 Rod: Sch 84-61:
Forged Aluminum Rod Stemball Tang for -8 & -10 Rod using standard (.68" OD) Rod Stemballs. Mounts internally in mast cutout 4 1/4" (109mm) high x 1" (26mm) wide using (3) 1/4" (6mm) rivets. Mounting surface is slightly curved to fit a variety of mast surfaces. Tang is 6 1/4" long x 1 1/4" wide, hole is .70" diameter. This item is no longer available and is shown here for reference only.

 

Sch 84-61

Rod Stemball Tang for -12 Rod: Sch 84-62:
Forged Aluminum Rod Stemball Tang for -12 Rod using standard (.77" OD) Rod Stemballs. Mounts internally in mast cutout 4 1/4" (109mm) high x 1" (26mm) wide using (3) 1/4" (6mm) rivets. Mounting surface is slightly curved to fit a variety of mast surfaces. Tang is 6 1/4" long x 1 1/4" wide. This item is no longer available and is shown here for reference only.

 

Rod Stemball Tang for -17 Rod: Sch 84-63:
Forged Aluminum Rod Stemball Tang for -17 Rod using standard (.91" OD) Rod Stemballs. Mounts internally in mast cutout 6 1/4" (158mm) high x 1 3/4" (44mm) wide using (4) 1/4-20 screws. Mounting surface is slightly curved to fit a variety of mast surfaces. Tang is 9" long x 1 15/16" wide, hole is .925" diameter.
Sch 84-63
Rod Stemball Tang for -22 Rod: Sch 84-64:
Forged Aluminum Rod Stemball Tang for -22 Rod using standard (1.03" OD) Rod Stemballs. Mounts internally in mast cutout 6 1/4" (158mm) high x 1 3/4" (44mm) wide using (4) 1/4-20 screws. Mounting surface is slightly curved to fit a variety of mast surfaces. Tang is 9" long x 1 15/16" wide, hole is 1.125" diameter.

 


Navtec K-200 Rod Stemball Tangs
Heavy-duty Forged Aluminum Rod Tangs for use with Rod Rigging Stemballs mount internally, and project out from the mast surface. Tangs are designed to fit through the mounting slot and are then fastened from the outside. Compatible with Navtec Large Head Rod Stemballs, and standard Rod Stemballs using a special Adapter Washer. Note: This type of tang actually becomes part of the rigging. It must be put on the rod before the ends are attached. It must be removed from the mast to take the rigging off.
Over the years Navtec has produced a variety of other Rod Stemball Tangs. If you need one, or parts for one, please contact us with Rod Size, Mast Slot dimensions, and Thread size, if applicable.

 

Rod Stemball Tang for -3, -4 & -6 Rod: NAV K-200-006:
Forged Aluminum Rod Stemball Tang for -3, -4, and -6 Rod. Mounts internally in mast cutout 2 3/4" (70mm) high x 1 1/8" (29mm) wide using (2) 1/4" FH Screws (included) on 3 9/16" (91mm) hole centers. Tang is 4 1/8" long x 1 1/8" wide, projects 5/8" out from interior mast surface, and is beveled for use with most Mast Sections.

 

Rod Stemball Tang for -8, -10 & -12 Rod: NAV K-200-012:
Forged Aluminum Rod Stemball Tang for -8, -10, and -12 Rod. Mounts internally in mast cutout 3 3/4" (96mm) high x 1 1/2" (38mm) wide using (2) 5/16" FH Screws (included) on 5 1/16" (129mm) hole centers. Tang is 5 3/4" long x 1 1/2" wide, projects 7/8" out from interior mast surface, and is beveled for use with most Mast Sections.

 

Rod Stemball Tang for -17, -22 & -30 Rod: NAV K-200-030:
Forged Aluminum Rod Stemball Tang for -17, -22, and -30 Rod. Mounts internally in mast cutout 5" (127mm) high x 2" (61mm) wide using (2) 3/8" FH Screws (included) on 6 11/16" (170mm) hole centers. Tang is 7 1/2" long x 2" wide, projects 1 3/16" out from interior mast surface, and is beveled for use with most Mast Sections.

 

Nan K-200-030


SeaRig Cast SS Rod Stemball Tangs
Made in New Zealand, SeaRig Heavy-duty Cast Stainless Steel Rod Tangs mount internally, and project out from the mast surface. Tangs are designed to fit through the mounting slot and are then fastened from the outside. Compatible with standard SeaRig Rod Stemballs, and Rod Stemballs with a similar Head diameter. Note: This type of tang actually becomes part of the rigging. It must be put on the rod before the ends are attached. It must be removed from the mast to take the rigging off. See SeaRig Rod Stemballs.

 

Rod Stemball Tang for -12 & -15 Rod: SeaRig RTB10:
Cast SS Rod Stemball Tang for -12 & -15 Rod using standard SeaRig (.945" OD) Stemballs. Mounts internally in 40mm (1 9/16") round hole in mast using (4) 1/4" (6mm) rivets. Tang is 4" long x 1 1/2" wide, projects 1 1/8" out from interior mast surface, hole is 18 x 20mm.

 

Rod Stemball Tang for -17 & -22 Rod: SeaRig RTB12:
Cast SS Rod Stemball Tang for -17 & -22 Rod using standard SeaRig (1.12" OD) Stemballs. Mounts internally in 45mm (1 7/8") round hole in mast using (4) 3/16" (5mm) rivets. Tang is 5 3/4" long x 1 3/8" wide, projects 1 1/4" out from interior mast surface, hole is 20 x 23mm.

~ Back to Tangs Main Page ~

~ Back to Rod Rigging Stemballs ~

~ Back to Rig-Rite Home Page ~