 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Rod Stemball Tangs |
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Rod Stemball Tangs |
|
| Heavy-duty Forged Aluminum Rod Tangs for use with Rod Rigging Stemballs mount internally. Tangs are designed to fit through the mounting slot and are then fastened from the outside. | |
| Schaefer Rod Stemball Tangs | |
| Heavy-duty Forged Aluminum Rod Tangs for use with
standard Rod Rigging Stemballs mount internally, flush with the surface of the mast. These
unique Tangs are the only ones that allow the Rod Rigging to be removed from the
mast without removing the entire Tang assembly. Tangs are designed to fit through
the mounting slot and are then fastened from the outside.
|
|
| Rod Stemball Tang for -4 Rod: Sch 84-60-4: Forged Aluminum Rod Stemball Tang for -4 Rod using standard Rod Stemballs. Mounts internally in mast cutout 2 13/16" (72mm) high x 3/4" (20mm) wide using (2) 3/16" (5mm) rivets. Mounting surface is slightly curved to fit a variety of mast surfaces. Tang is 3 15/16" long x 1" wide, and is contoured for use with most Mast Sections.
|
|
| Rod Stemball Tang for -6 Rod: Sch 84-60-6: Forged Aluminum Rod Stemball Tang for -6 Rod using standard Rod Stemballs. Mounts internally in mast cutout 2 13/16" (72mm) high x 3/4" (20mm) wide using (2) 3/16" (5mm) rivets. Mounting surface is slightly curved to fit a variety of mast surfaces. Tang is 3 15/16" long x 1" wide, and is contoured for use with most Mast Sections.
|
|
| Rod Stemball Tang for -8 & -10 Rod: Sch 84-61: Forged Aluminum Rod Stemball Tang for -8 & -10 Rod using standard Rod Stemballs. Mounts internally in mast cutout 4 1/4" (109mm) high x 1" (26mm) wide using (3) 1/4" (6mm) rivets. Mounting surface is slightly curved to fit a variety of mast surfaces. Tang is 6 1/4" long x 1 1/4" wide, and is contoured for use with most Mast Sections.
|
|
| Rod Stemball Tang for -12 Rod: Sch 84-62: Forged Aluminum Rod Stemball Tang for -12 Rod using standard Rod Stemballs. Mounts internally in mast cutout 4 1/4" (109mm) high x 1" (26mm) wide using (3) 1/4" (6mm) rivets. Mounting surface is slightly curved to fit a variety of mast surfaces. Tang is 6 1/4" long x 1 1/4" wide, and is contoured for use with most Mast Sections.
|
|
| Rod Stemball Tang for -17 Rod: Sch 84-63: Forged Aluminum Rod Stemball Tang for -17 Rod using standard Rod Stemballs. Mounts internally in mast cutout 6 1/4" (158mm) high x 1 3/4" (44mm) wide using (4) 1/4-20 screws. Mounting surface is slightly curved to fit a variety of mast surfaces. Tang is 9" long x 1 15/16" wide, and is contoured for use with most Mast Sections.
|
 |
| Rod Stemball Tang for -22 Rod: Sch 84-64: Forged Aluminum Rod Stemball Tang for -22 Rod using standard Rod Stemballs. Mounts internally in mast cutout 6 1/4" (158mm) high x 1 3/4" (44mm) wide using (4) 1/4-20 screws. Mounting surface is slightly curved to fit a variety of mast surfaces. Tang is 9" long x 1 15/16" wide, and is contoured for use with most Mast Sections.
|
|
| Navtec K-200 Rod Stemball Tangs | |
| Heavy-duty Forged Aluminum Rod Tangs for use with
Rod Rigging Stemballs mount internally, and project out from the mast surface. Tangs are
designed to fit through the mounting slot and are then fastened from the outside.
Compatible with Navtec Large Head Rod Stemballs, and standard Rod Stemballs using a
special Adapter Washer. Note: This type of tang actually becomes part
of the rigging. It must be put on the rod before the ends are attached. It must
be removed from the mast to take the rigging off. Over the years Navtec has produced a variety of other Rod Stemball Tangs. If you need one, or parts for one, please contact us with Rod Size, Mast Slot dimensions, and Thread size, if applicable.
|
|
| Rod Stemball Tang for -3, -4, and -6 Rod: NAV K-200-006: Forged Aluminum Rod Stemball Tang for -3, -4, and -6 Rod. Mounts internally in mast cutout 2 3/4" (70mm) high x 1 1/8" (29mm) wide using (2) 1/4" FH Screws (included) on 3 9/16" (91mm) hole centers. Tang is 4 1/8" long x 1 1/8" wide, projects 5/8" out from interior mast surface, and is beveled for use with most Mast Sections.
|
|
| Rod Stemball Tang for -8, -10, and -12 Rod: NAV K-200-012: Forged Aluminum Rod Stemball Tang for -8, -10, and -12 Rod. Mounts internally in mast cutout 3 3/4" (96mm) high x 1 1/2" (38mm) wide using (2) 5/16" FH Screws (included) on 5 1/16" (129mm) hole centers. Tang is 5 3/4" long x 1 1/2" wide, projects 7/8" out from interior mast surface, and is beveled for use with most Mast Sections.
|
|
| Rod Stemball Tang for -17, -22, and -30 Rod: NAV K-200-030: Forged Aluminum Rod Stemball Tang for -17, -22, and -30 Rod. Mounts internally in mast cutout 5" (127mm) high x 2" (61mm) wide using (2) 3/8" FH Screws (included) on 6 11/16" (170mm) hole centers. Tang is 7 1/2" long x 2" wide, projects 1 3/16" out from interior mast surface, and is beveled for use with most Mast Sections.
|
|
