Pivoting Strap Tangs

Pivoting Strap Tangs Used in a wide variety of applications, these Single Strap Tangs mount on a single bolt, and are especially suited for use with Intermediate and Lower Shrouds where angles might vary, or might not be precisely determined ahead of time.

*Short Shroud Tang for 3/16" Pin: K-617:* Lightweight SS Shroud Tang mounts on a 1/4" bolt, for use with a Shroud up to 1/8" dia. using standard Aircraft Fork. Tang is 2" long x 3/4" wide x .062" thick with (1) 1/4" mounting hole and (1) 3/16" Pin Hole. Tang Assembly mounts on a 1/4" bolt, hole centers are 1 5/16" apart. Used in a variety of applications.
*‘Dog-Bone’ Shroud Tang for 3/16" Pin: K-9581-53:* Lightweight SS ‘Dog-Bone’ Shroud Tang mounts on a 5/16" bolt, for use with a Shroud up to 1/8" dia. using standard Aircraft Fork. Stamped ‘Dog-Bone’ Design reduces weight and windage to a minimum. Tang is 4" long x (maximum) 1" wide x .090" thick with (1) 5/16" mounting hole and (1) 3/16" Pin Hole. Hole centers are 3" apart.
‘Dog-Bone’ Shroud Tang for 3/16" Pin: K-9581-63: Lightweight SS ‘Dog-Bone’ Shroud Tang mounts on a 3/8" bolt, for use with a Shroud up to 1/8" dia. using standard Aircraft Fork. Stamped ‘Dog-Bone’ Design reduces weight and windage to a minimum. Tang is 4" long x (maximum) 1" wide x .090" thick with (1) 3/8" mounting hole and (1) 3/16" Pin Hole. Hole centers are 3" apart.
‘Dog-Bone’ Shroud Tang for 1/4" Pin: K-9581-64: Lightweight SS ‘Dog-Bone’ Shroud Tang mounts on a 3/8" bolt, for use with a Shroud up to 5/32" dia. using standard Aircraft Fork. Stamped ‘Dog-Bone’ Design reduces weight and windage to a minimum. Tang is 4" long x (maximum) 1" wide x .090" thick with (1) 3/8" mounting hole and (1) 1/4" Pin Hole. Hole centers are 3" apart.
Shroud Tang for 1/4" Pin: SP-209: Lightweight SS Shroud Tang mounts on a 3/8" bolt, for use with a Shroud up to 5/32" dia. using standard Aircraft Fork. Tang is 3 3/4" long x 1 1/16" wide x .070" thick with (1) 3/8" mounting hole and (1) 1/4" Pin Hole. Hole centers are 2 3/4" apart.
Heavy Duty Shroud Tang for 1/4" Pin: K-363B: Heavy SS Shroud Tang mounts on a 3/8" bolt, for use with a Shroud up to 5/32" dia. using standard Aircraft Fork. Tang is 3 3/4" long x 1" wide x 1/8" (.125") thick with (1) 3/8" mounting hole and (1) 1/4" Pin Hole. Hole centers are 2 3/4" apart.
Long Shroud Tang for 1/4" Pin: K-910: Long, Heavy SS Shroud Tang mounts on a 3/8" bolt, for use with a Shroud up to 5/32" dia. using standard Aircraft Fork. Tang is 4" long x 1" wide x 1/8" (.125") thick with (1) 3/8" mounting hole and (1) 1/4" Pin Hole. Hole centers are 3" apart.
Shroud Tang for 5/16" Pin: K-363C: SS Shroud Tang mounts on a 3/8" bolt, for use with a Shroud up to 7/32" dia. using standard Aircraft Fork. Tang is 3 3/4" long x 1" wide x 1/8" (.125") thick with (1) 3/8" mounting hole and (1) 5/16" Pin Hole. Hole centers are 2 3/4" apart. Replaces SP-202 (.120" thick).
Tapered Shroud Tang for 5/16" Pin - Special: PP 21184TT: Tapered SS Shroud Tang mounts on a 1/2" bolt, for use with a Shroud up to 7/32" dia. using standard Aircraft Fork. Tang is 4 5/16" long x 1 9/16" wide (maximum, at top) x .090" thick with (1) 1/2" mounting hole and (1) 5/16" Pin Hole. Hole centers are 3" apart. As used by Bristol and Pearson.
Heavy Duty Shroud Tang for 5/16" Pin: K-2251: SS Shroud Tang mounts on a 3/8" bolt, for use with a Shroud up to 7/32" dia. using standard Aircraft Fork. Tang is 4" long x 1" wide x 3/16" (.188") thick with (1) 3/8" mounting hole and (1) 5/16" Pin Hole. Hole centers are 3" apart. D40368
Shroud Tang for 3/8" Pin: K-2161: SS Shroud Tang for use with a Shroud up to 1/4" dia. using standard Aircraft Fork. Designed for mounting using 11/16" OD Flange Bushing, K-9631, and a 3/8" bolt for minimum weight aloft. Tang is 5 3/8" long x 1 1/4" wide x 3/16" (.188") thick with (1) 11/16" mounting hole and (1) 3/8" Pin Hole. Hole centers are 4" apart. D40375

Spars, Rigging, and Hardware for Sailboats