Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions

Double Shroud Strap Tangs


Double Shroud Strap Tangs
Used on rigs with Double Lower Shrouds, these Tangs are also suitable in a variety of other applications.

Double Shroud Tang for 3/16" Pins: K-8909M:
SS Double Shroud Tang mounts on a 3/8" bolt, for use with (2) Shrouds up to 1/8" diameter using standard Aircraft Forks. Tang is 3 1/4" long x 1 3/4" wide x 1/8" (.125") thick with (1) 3/8" mounting hole and (2) 3/16" Pin Holes. Pin Hole centers are 2" (vertical) from mounting hole and are 3/4" (horizontal) apart. Used as Lower Shroud Tang and in a variety of other applications. As used on Lightning.

 

 

Double Shroud Tang for 1/4" Pins: K-8910VR:
SS Double Shroud Tang mounts on a 3/8" bolt, for use with (2) Shrouds up to 5/32" diameter using standard Aircraft Forks. Tang is 4 1/4" long x 1 3/8" wide x .075" with (1) 3/8" mounting hole and (2) 1/4" Pin Holes. Pin Hole centers are 3" (vertical) from mounting hole and are 9/16" (horizontal) apart. Used as Lower Shroud Tang and in a variety of other applications.

 

K-8910VR
Double Shroud Tang for 1/4" Pins: K-8910:
SS Double Shroud Tang mounts on a 3/8" bolt, for use with (2) Shrouds up to 5/32" diameter using standard Aircraft Forks. Tang is 3 5/8" long x 1" wide (at top) x 1 1/2" wide (at bottom) x 1/8" (.125) with (1) 3/8" mounting hole and (2) 1/4" Pin Holes. Pin Hole centers are 2 1/2" (vertical) from mounting hole and are 3/4" (horizontal) apart.

 

K-8910

Double Shroud Tang for 1/4" Pins: SP-203:
SS Double Shroud Tang mounts on a 3/8" bolt, for use with (2) Shrouds up to 5/32" diameter using standard Aircraft Forks. Tang is 4 1/4" long x 1" wide (at top) x 1 7/8" wide (at bottom) x .120" with (1) 3/8" mounting hole and (2) 1/4" Pin Holes. Pin Hole centers are 3 3/16" (vertical) from mounting hole and are 1 1/16" (horizontal) apart. Used as Lower Shroud Tang with SP-302 and SP-056 Spreader Bases, and in a variety of other applications. As Sch 85-54.

 


Double Shroud Tang for 5/16" Pins: K-8910-5:
SS Double Shroud Tang mounts on a 3/8" bolt, for use with (2) Shrouds up to 7/32" diameter using standard Aircraft Forks. Tang is 3 5/8" long x 1" wide (at top) x 1 1/2" wide (at bottom) x 1/8" (.125) with (1) 3/8" mounting hole and (2) 5/16" Pin Holes. Pin Hole centers are 2 1/2" (vertical) from mounting hole and are 3/4" (horizontal) apart.

 

K-8910

Double Shroud Tang for 5/16" Pins: SP-205:
SS Double Shroud Tang mounts on a 3/8" bolt, for use with (2) Shrouds up to 7/32" diameter using standard Aircraft Forks. Tang is 6 5/8" long x 1" wide (at top) x 2 1/2" wide (at bottom) x .120" with (1) 3/8" mounting hole and (2) 5/16" Pin Holes. Pin Hole centers are 5 1/2" (vertical) from mounting hole and are 1 1/2" (horizontal) apart. Used as Lower Shroud Tang with SP-089 Spreader Bases, and in a variety of other applications. As Sch 85-55.

 

Double Shroud Tang for 5/16" Pins: SP-205-8S:
SS Double Shroud Tang mounts on a 1/2" bolt, for use with (2) Shrouds up to 7/32" diameter using standard Aircraft Forks. Tang is 5" long x 1 1/2" wide (at top) x 2 1/2" wide (at bottom) x .120" with (1) 1/2" mounting hole and (2) 5/16" Pin Holes. Pin Hole centers are 3 3/4" (vertical) from mounting hole and are 1 1/2" (horizontal) apart.

 

Double Shroud Tang for 5/16" Pins: RR 85-2108-5:
SS Double Shroud Tang mounts on a 1/2" bolt, for use with (2) Shrouds up to 7/32" diameter using standard Aircraft Forks. Tang is 4 3/4" long x 1 1/2" wide (at top) x 2 7/8" wide (at bottom) x .109" with (1) 1/2" mounting hole and (2) 5/16" Pin Holes. Pin Hole centers are 3 1/4" (vertical) from mounting hole and are 1 5/16" (horizontal) apart. As used on Sabre 28 Mk. 3, and in a variety of other applications.

 

Angled Double Shroud Tang for 5/16" Pins: RR 85-2108-5P:
Angled Double Shroud Tang for 5/16" Pins: RR 85-2108-5S:

SS Double Lower Shroud Tang mounts on a 1/2" bolt, for use with (2) Shrouds up to 7/32" diameter using standard Aircraft Forks. As RR 85-2108-5, above, but with forward Pin Hole angled for inboard chainplate attachment. As used on Sabre 28 (Mk.1&2), and in a variety of other applications.

 


Double Shroud Tang for 3/8" Pins: SP-205L-8S:
SS Double Shroud Tang mounts on a 1/2" bolt, for use with (2) Shrouds up to 9/32" diameter using standard Aircraft Forks. Tang is 5 3/8" long x 1 1/4" wide (at top) x 2 7/8" wide (at bottom) x 3/16" with (1) 1/2" mounting hole and (2) 3/8" Pin Holes. Pin Hole centers are 3 3/4" (vertical) from mounting hole and are 1 1/2" (horizontal) apart.  Sch

~ Back to Tangs Main Page ~

~ Back to Rig-Rite Home Page ~