Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
 Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions

Boom Outhaul Slides for Integral Track
Outhaul Slides & Cars for Booms with an Integral Track

For 1/2" Boltrope Groove

For 3/4" Internal Flat Track
For 7/8" Internal Flat Track
For 15/16" Internal Flat Track
For 1" Internal Flat Track

Outhaul Cars for Isomat Booms
Outhaul Cars for Francespar & Sparcraft Booms
 
Outhaul Slides for 1/2" Boltrope Groove
Simple Outhaul Slide for 1/2" Boltrope Groove: Sch 95-02X:
Simple SS Outhaul Slide has formed body and 1/4" welded loop with 3/4" ID for attachment of clew and outhaul pennant. Slide is 1 1/2" long x (maximum) 1 5/8" high. For Booms with a 1/2" Boltrope groove. #  sc254

 
Outhaul Slide for 1/2" Boltrope Groove: Sch 95-11X:
Simple SS Outhaul Slide features welded triangular Tab with 3/8" hole for clew attachment and welded eye for attachment of outhaul pennant. Slide is 2 1/2" long x (maximum) 1/2" wide and 2" high. For Booms with a 1/2" Boltrope groove.

 

 Sch 95-11X
Outhaul Slide Assembly for 1/2" Boltrope Groove: Sch 95-21X:
Light-duty Outhaul Slide Assembly features channel with 1/4" captive Key Pin for clew attachment, and a welded SS Eye for attachment of Outhaul line or Block. Slide body is formed SS with welded Eye and 1/2" ID channel for Clew. Slide is 2 1/2" long x (maximum) 5/8" wide and 2 5/8" high. For Booms with a 1/2" Boltrope groove.

 

 Sch 95-21X
Outhaul Slide w/ Sheave for 1/2" Boltrope Groove: Sch 95-52X:
Outhaul Slide features welded eye for clew attachment, and 3/4" diameter SS Sheave for a 2-part purchase using up to a 1/8" wire pennant. When additional purchase is not desired, sheave can be used for direct attachment of outhaul pennant. Slide body is formed SS with welded sheave cage and welded Eye for Clew. Slide is 2 1/2" long x 3/4" wide, and 2 1/2" (maximum) high. For Booms with a 1/2" Boltrope groove.

 

 Sch 95-52X

 
Outhaul Slide Assembly w/ Sheave for 1/2" Boltrope Groove: Sch 95-53X:
Heavy-duty Outhaul Slide Assembly features channel with 1/4" captive Key Pin for clew attachment, and 3/4" diameter SS Sheave for a 2-part purchase using up to a 1/8" wire pennant. When additional purchase is not desired, sheave can be used for direct attachment of outhaul pennant. Slide body is formed SS with welded sheave cage and 5/8" ID channel for Clew. Slide is 2 1/2" long x 3/4" wide, and 2 1/2" (maximum) high. For Booms with a 1/2" or larger Boltrope groove.

 

 Sch 95-53X
Outhaul Slide Assembly for 1/2" Boltrope Groove: NF 10230S:
SS Outhaul Slide Assembly features SS Toggle for clew attachment using 3/8" clevis pin. Pivoting SS Toggle has 3/4" ID for Clew ring, wire outhaul pennant is attached with stop sleeve inside the sail tunnel. Slide is 3" long x 15/16" wide. Formed SS Slide w/ Toggle is 2 3/8" (maximum) high. For Booms with a 1/2" or larger Boltrope groove using an internal wire outhaul pennant.

 
Outhaul Slide for 1/2" Boltrope Groove: Fam 3159:

 
Outhaul Slide for 1/2" Boltrope Groove: Fam 3160M:
Heavy-duty Cast Bronze Outhaul Slide Assembly features channel with clew attachment using 3/8" clevis pin, and a large 1/2" hole for attachment of Outhaul pennant or Block. Slide has a 9/16" ID channel for Clew and measures 3 1/2" long x 1" wide (maximum) and 2 3/8" high. For Boom sections with a 1/2" or larger Boltrope groove. RC30

 

 Fam 3160M
Outhaul Slide Assembly for 1/2" Boltrope Groove: Sch 95-57X:
Heavy-duty Outhaul Slide Assembly features channel with 2-position clew attachment using 5/16" clevis pin, and a welded SS Eye for attachment of Outhaul pennant or Block. Slide body is welded SS with a 9/16" ID channel for Clew and a heavy delrin liner to minimize friction. Slide is 3 3/4" long x 3/4" wide, and 2 3/4" (maximum) high. For Boom sections with a 1/2" or larger Boltrope groove.

 

 Sch 95-57X 

 
Outhaul Slide Assembly w/ Sheave for 1/2" Boltrope Groove: Sch 95-56X:
Heavy-duty Outhaul Slide Assembly features channel with 2-position clew attachment using 5/16" clevis pin, and 1 1/16" diameter delrin Sheave for a 2 part purchase using up to a 3/8" rope pennant. Slide body is welded SS with welded sheave cage, a 9/16" ID channel for Clew and a heavy delrin liner to minimize friction. Slide is 3 3/4" long x 3/4" wide, and 2 5/8" (maximum) high. For Boom sections with a 1/2" or larger Boltrope groove.

 

 Sch 95-56X
Large Outhaul Slide Assembly w/ Sheave for 1/2" Boltrope Groove: RCS 95-56C:
Heavy-duty Outhaul Slide Assembly features channel with 2-position clew attachment using 3/8" clevis pin, and 1 5/8" diameter micarta Sheave for a 2 part purchase using up to a 3/8" rope pennant. Slide body is cast Chrome-plated Bronze with SS sheave cage plate and 3/4" ID channel for Clew. Slide body is 5 1/4" long x 1 3/16" wide, and 3 5/8" (maximum) high. For Boom sections with a 1/2" or larger Boltrope groove.

 

 RC 95-56C
Outhaul Slides for 3/4" Internal Flat Track
Simple Outhaul Slide for 3/4" Internal Track: PP-95-341:
Simple Aluminum Outhaul Slide has (2) 5/16" holes for attachment of shackles for Outhaul pennant and Clew. Anodized, machined Slide is 3 1/2" long x 3/4" (.700) wide x 1 5/16" high. Fits Kenyon 3550, 3756 and other Boom sections with 3/4" Internal Track.

 

 PP-95-341.gif (6176 bytes)
Outhaul Slide Assembly for 3/4" Internal Track: K-43009:
Outhaul Slide Assembly features pivoting toggle with 2-position clew attachment using 5/16" clevis pin, and separate pin for attachment of outhaul pennant. Slide is (maximum) 3 3/4" long x 3/4" wide, and 3 1/4" high. For 3550, 3756 and other Boom sections with 3/4" Internal Flat Track.

 

K-43009
Outhaul Slide Assembly w/ Sheave for 3/4" Internal Track: Sch 95-54X:
Heavy-duty Outhaul Slide Assembly features channel with 2-position clew attachment using 5/16" clevis pin, and 1 1/16" diameter SS Sheave for a 2 part purchase using up to a 5/32" wire pennant. When additional purchase is not desired, sheave can be used for direct attachment of outhaul pennant. Slide body is cast SS with welded sheave cage and 9/16" ID channel for Clew. Slide is 3 3/4" long x 3/4" wide, and 2 5/8" (maximum) high. For 3550, 3756 and other Boom sections with 3/4" Internal Flat Track.

 

 Sch 95-54X
Outhaul Slide Assembly w/ Sheave & Toggle for 3/4" Internal Track: Sch 95-82X:
Heavy-duty Outhaul Slide Assembly features toggle with 2-position clew attachment using 5/16" clevis pin, and 1 1/16" diameter SS Sheave for a 2 part purchase using up to a 5/32" wire pennant. Sheave is angled 15 degrees downward to help counter upward leech tension. Slide body is cast SS with welded sheave cage and pivoting toggle with 7/8" ID for Clew. Slide is 4 3/4" long x 3/4" wide, and 3 1/8" (maximum) high. For 3550, 3756 and other Boom sections with 3/4" Internal Flat Track.

 

 Sch 95-82X
Outhaul Slides for 7/8" Internal Track Booms
Outhaul Slide for 7/8" Internal Track: K-11071:
SS Outhaul Slide features 1/2" hole for attachment of outhaul pennant and a 7/16" slot for use with a D-shackle to attach the tack of the sail. Slide is (maximum) 3 1/2" long x 1 3/8" high. For 5072 and other Boom sections with 7/8" Internal Flat Track.

 

 K-11071
Outhaul Slide for 7/8" Internal Track: PP-95-782:
Heavy-duty SS Outhaul Slide Assembly features SS Toggle for clew attachment using 1/2" clevis pin. Pivoting SS Toggle has 3/4" ID for Clew ring, horizontal pin (1/2") has shackle for attachment of outhaul pennant. Slide body is 4" long x 13/16" wide. Investment Cast SS Slide w/ Toggle is 3 5/8" (maximum) high. Fits all Boom sections with 7/8" Internal Flat Track.

 

 PP-95-782
Outhaul Slide w/ Sheave for 7/8" Internal Track: PP-95-781:
Heavy-duty Outhaul Slide Assembly features SS Toggle for clew attachment using 7/16" clevis pin, and 1 1/4" diameter Aluminum Sheave for a 2 part purchase using up to a 3/16" wire pennant. Sheave is angled 10 degrees downward to help counter upward leech tension. Pivoting SS Toggle has 1 1/8" ID for Clew ring. Aluminum Slide body is 5 1/8" long x 7/8" wide (maximum), Slide w/ Toggle is 3 1/4" (maximum) high. Fits most Boom sections with 7/8" Internal Flat Track.

 
Outhaul Slides for 15/16" Internal Track Booms
Outhaul Slide for 15/16" Internal Track: PP-95-1516-1:
Heavy-duty Outhaul Slide Assembly features SS Toggle for clew attachment using 7/16" clevis pin, and unique, trim attachment for a 1/8" wire pennant using Ball Swage w/ shank (MS20664-4) or Nicopress Stop sleeves. Pivoting SS Toggle has 1 1/8" ID for Clew ring. Aluminum Slide body is 3 3/4" long x 1" wide (maximum), Slide w/ Toggle is 3 1/4" (maximum) high. Fits most Boom sections with 15/16" Internal Flat Track, and many sections with a 1" Internal Flat Track.

 
Outhaul Slides for 1" Internal Track Booms
Outhaul Slide for 1" Internal Track: NF 10260S:
SS Outhaul Slide Assembly features SS Toggle for clew attachment using 3/8" clevis pin. Pivoting SS Toggle has 3/4" ID for Clew ring, wire outhaul pennant is attached with stop sleeve. Slide is 3" long x 15/16" wide. Formed SS Slide w/ Toggle is 2 3/8" (maximum) high. For Booms using NF 10290 internal Track, as well as Rig-Rite RR#8 and all other Boom sections with 1" Internal Flat Track.

 

  
Outhaul Slide for 1" Internal Track: PP-95-101T:
Heavy-duty SS Outhaul Slide Assembly features SS Toggle for clew attachment using 1/2" clevis pin. Pivoting SS Toggle has 3/4" ID for Clew ring, horizontal pin (1/2") has shackle for attachment of outhaul pennant. Slide body is 4" long x 31/32" wide. Investment Cast SS Slide w/ Toggle is 3 5/8" (maximum) high. For Rig-Rite RR#8 and all other Boom sections with 1" Internal Flat Track.

 

 PP-95-782
Outhaul Slide w/ Sheave for 1" Internal Track: Mer 409CB-3S1:
Heavy-duty Outhaul Slide Assembly features toggle with 2-position clew attachment using 3/8" clevis pin, and 1 3/16" diameter Chromed Bronze Sheave for a 2 part purchase using up to a 3/16" wire pennant. Sheave is angled 10 degrees downward to help counter upward leech tension. Slide body and toggle are cast Chrome-plated Bronze, slide bottom is SS. Pivoting toggle has 3/4" ID for Clew. Slide is 4 3/8" long x 1 3/16" wide (maximum), and 3 1/4" (maximum) high. For Rig-Rite RR#8 and other Boom sections with 1" Internal Flat Track.

 

 Mer-856s
Outhaul Cars for Isomat Booms
*See also, Outhaul Slides for Francespar and Sparcraft Booms, below.
 
NB-32, NB-40 Outhaul Car: NB2-17A:
SS Outhaul Car designed to fit in Isomat NB-32, and NB-40 Booms. To identify Isomat Booms, See Isomat Boom Specifications. Car rides on 4 delrin wheels, NB2-18W, below, and includes an 8mm (5/16") shackle, NB2-2, used for attachment of the sail and the outhaul pennant. Car is 85mm (3 3/8") long.

 
NB-32, NB-40 Outhaul Car: NB2-18AD:
SS Outhaul Car designed to fit in Isomat NB-32, and NB-40 Booms. To identify Isomat Booms, See Isomat Boom Specifications. Assembly is 92mm (3 5/8") long. Car rides on 4 delrin wheels and features a 12mm (7/16") clew attachment pin and a 10mm (3/8") pin for attachment of the outhaul pennant.

 
NB-32, 40 Outhaul Car Wheel: NB2-18WD:
Delrin Wheel for NB-32 Outhaul Car is 19mm (3/4") OD x 10mm (3/8") wide x 10mm (3/8") ID.

 
NB-2 Outhaul Car Axle: NB2-18XD:
SS Outhaul Car Axle is 10mm (3/8") OD x 24mm (15/16") long.

 

 Iso_NG2-18XD
NB-55 Outhaul Car: NB2-18AS:
SS Outhaul Car designed to fit in Isomat NB-55 Booms. To identify Isomat Booms, See Isomat Boom Specifications. Assembly is 92mm (3 5/8") long. Car rides on 4 SS wheels and features a 12mm (7/16") clew attachment pin and a 10mm (3/8") pin for attachment of the outhaul pennant.

 
NB-55 Outhaul Car Wheel: NB2-18WS:
SS Wheel for NB-55 Outhaul Car is 19mm (3/4") OD x 7mm (1/4") wide x 10mm (3/8") ID.

 
NB-55 Outhaul Car Axle: NB2-18XS:
SS Outhaul Car Axle is 10mm (3/8") OD x 19mm (3/4") long.

 

 Iso_NG2-18XS
Outhaul Slides for Francespar & Sparcraft Booms
A number of Sparbuilders including Francespar, Isomat, and Sparcraft have used Boom Sections with a rectangular sail groove that is 20mm (13/16") high x 26mm (1") wide. Outhaul Slides listed below fit all such Sections, Including: Sparcraft FB-60 through FB-3400 Boom Sections, Isomat NB-32, NB-40 and NB-70 Boom Sections, and a variety of Francespar and other Booms with a rectangular sail groove that is 20mm (13/16") high x 26mm (1") wide.
 
FB-2 Outhaul Slide, Short: FB2-18AS:
Aluminum Outhaul Car Assembly is 100mm (4") long. Car rides on 4 Torlon rods to minimize friction, and features a 8mm (5/16") removable shackle for attachment of the clew and outhaul pennant. Slide fits Sparcraft FB-60 through FB-3400 Boom Sections, Isomat NB-32, NB-40 and NB-70 Boom Sections and a variety of Francespar and other Booms with a rectangular sail groove that is 20mm (13/16") high x 26mm (1") wide.

 
Torlon Rods for FB-2 Short Outhaul Car: FB2-18SRP:
Torlon Rod Set for Short FB-2 Outhaul Car includes (4) 1/4" (6mm) Torlon rods x 100mm (4") long.

 
FB-2 Outhaul Slide, Long: FB2-18AL:
Aluminum Outhaul Car Assembly is 150mm (6") long. Car rides on 4 Torlon rods to minimize friction, and features a 8mm (5/16") shackle for attachment of the clew and outhaul pennant. Slide fits Sparcraft FB-60 through FB-3400 Boom Sections, Isomat NB-32, NB-40 and NB-70 Boom Sections and a variety of Francespar and other Booms with a rectangular sail groove that is 20mm (13/16") high x 26mm (1") wide.

 
Torlon Rods for FB-2 Long Outhaul Car: FB2-18LRP:
Torlon Rod Set for Long FB-2 Outhaul Car includes (4) 1/4" (6mm) Torlon rods x 150mm (6") long.

 
FB-2 Outhaul Slide, Long - Double: FB2-18ALD:
Heavy-duty Outhaul Car Assembly is 320mm (6") long. Car consists of (2) FB2-18AL Long Outhaul Slides, above, joined with a SS coupler, and features a 16mm (5/8") Pin for attachment of the clew and an 8mm (5/16") Pin for attachment of the outhaul pennant. Slide fits Sparcraft FB-60 through FB-3400 Boom Sections, Isomat NB-32, NB-40 and NB-70 Boom Sections and a variety of Francespar and other Booms with a rectangular sail groove that is 20mm (13/16") high x 26mm (1") wide. MMM&bel 

 
FB-550 Outhaul Slide Coupler: FB2-18DC:
Heavy-duty SS Coupler Assembly is used to connect any two FB2-18 Outhaul Cars, above, for high load applications. SS Coupler Assembly attaches to Car shackles with 10mm (3/8") Pins, and features a 16mm (5/8") Pin for attachment of the clew and an 8mm (5/16") Pin for attachment of the outhaul pennant.

~ Back to Boom Outhaul Slides Page ~

~ Back to Rig-Rite Home Page ~