Rig-Rite #2 Boom Section

Rig-Rite #2 (2717) Boom Section Measurements: (OD) 2.75" x 1.75" Wall Thickness: .095" Weight/ft.: .89 lbs. Moments of inertia: Ixx = .55", Iyy = .27" Circumference: 7 3/16" Alloy: 6063-T6 Sail slides: 1/2" round slugs (A018, A118) or 1/2" boltrope Standard Boom Lengths: 20'5", 22', 24'

RR #2 Boom Section RR #2 Boom Section - Clear Anodized: RR-X2CA-___: Rig-Rite #2 Section Boom Tube is stocked in a variety of lengths (listed above) fully anodized, it can also be cut to shorter lengths. To order, specify length. Sections can also be milled for the sail entrance or other components if necessary, painted finishes and other lengths are available on special order, Please specify. If you require a complete Boom Assembly, you can select from components below and contact us with specifications.

RR #2 Boom Components

Masthead Assembly - for Masthead Rig: PP4025-:
Masthead Assembly - Fractional Rig: PP4025-:
Spreader Base Assembly for 1 5/16" OD Spreaders: PP4025-:
Mast Step - Deck Mount: PP4025-2: Mast Step for RR-4025 Section fastens to deck or keelson with (2) 1/4" bolts. Cast Aluminum Mast Step is (maximum) 5 1/4" long x 3 1/2" wide. MMM
Mast Step - Keel Mount: PP4025-2K: Mast Step fastens to keelson with (2) 3/8" bolts in external adjustment slots to allow for precise positioning. Designed for use with special Cast Base Plate, below, Mast Step can also be fastened to any flat surface with 3/8" bolts. Aluminum Mast Step is (maximum) 10 1/2" long x 3 1/2" wide. MMM
Base Plate for Keel Mount Mast Step: PP4025-2KP:

Spars, Rigging, and Hardware for Sailboats