Kenyon Small Boat Tangs

*Forestay/Shroud Tang for 3/16" Pin: K-353-2Y:* Lightweight SS Shroud Tang mounts with (2) 3/16" screws or rivets, for use with a Shroud up to 3/32" dia. using standard Aircraft Fork. Tang is 2 11/16" long x 7/16" wide x .056" with (3) 3/16" mounting holes and (1) 3/16" Pin Hole. Fastener holes are 7/8" apart. As used on Laser 2, and in a variety of lightweight Forestay and Shroud applications.
*Forestay/Shroud Tang for 1/4" Pin: K-354-3:* Lightweight SS Shroud Tang mounts with (3) 3/16" screws or rivets, for use with a Shroud up to 1/8" dia. using standard Aircraft Fork. Tang is x 3" long x 3/4" wide x .056" with (3) 3/16" mounting holes and (1) 1/4" Pin Hole. Fastener holes are 7/16" apart. Features curved mounting surface for use in a wide variety of Forestay and Shroud applications.
*Forestay/Shroud Tang for 1/4" Pin: K-354-4:* Lightweight SS Shroud Tang mounts with (4) 3/16" screws or rivets, for use with a Shroud up to 5/32" dia. using standard Aircraft Fork. Tang is 4" long x 3/4" wide x .056" with (4) 3/16" mounting holes and (1) 1/4" Pin Hole. Fastener holes are 7/16" apart. Features curved mounting surface for use in a wide variety of Forestay and Shroud applications.
*Fixed Shroud Tang for 3/16" Pin: K-356-83:* SS Shroud Tang was designed for use with Shrouds up to 1/8" diameter using standard Aircraft Fork. Tang is 6" long x 1" wide x .065" with (3) 3/16" and (1) 1/2" mounting holes and (1) 3/16" Pin Hole. Upper fastener hole centers are 3/4" apart, with 1/2" hole 15/16" below lowest. Pin Hole center is 2 1/2" from lower mounting hole. Assembly attaches to the mast with (3) 3/16" screws or rivets. Lower 1/2" mounting hole allows for use with old-style through-bolt Spreader Bases.

Spars, Rigging, and Hardware for Sailboats