Kenyon Single Clevis Tangs

*Fixed Clevis Tang w/ 3/16" Pin: K-616AFR:* SS Clevis Tang Assembly was designed for use with Shrouds up to 1/8" diameter with standard Eyes. Tang is 3" long x 1/2" wide x .062" with (2) 3/16" mounting holes and includes (1) 3/16" Clevis Pin. Tang Assembly mounts with (2) 3/16" (10) fasteners, mounting hole centers are 1 3/8" apart. Used in a variety of applications.
*Short Clevis Tang w/ 3/16" Pin: K-616A:* Lightweight SS Clevis Tang Assembly was designed for use with Shrouds up to 1/8" diameter with standard Eyes. Tang is 2" long x 3/4" wide x .062" with (1) 1/4" mounting hole and includes (1) 3/16" Clevis Pin. Tang Assembly mounts on a 1/4" bolt, hole centers are 1 5/16" apart. Used in a variety of applications.
*Short Clevis Tang w/ 1/4" Pin: K-84-1106-4R:* Short Clevis Tang Assembly for use with Shrouds up to 5/32" diameter using standard Eyes. Tang is 2" long x 5/8" wide x .062" with (1) 1/4" mounting hole and includes (1) 1/4" Clevis Pin. Tang Assembly mounts on a 1/4" bolt; hole centers are 1 3/8" apart. Used in a variety of applications.
Short Tapered Clevis Tang w/ 5/16" Pin: K-84-1106-5R: Short Tapered Clevis Tang Assembly for use with Shrouds up to 3/16" diameter using standard Eyes. Tang is 2 1/2" long x (maximum) 1" wide x .062" with (1) 3/8" mounting hole and includes (1) 5/16" Clevis Pin. Tang Assembly mounts on a 3/8" bolt; hole centers are 1 1/2" apart. Used in a variety of applications.
'Dog-Bone' Clevis Tang w/ 1/4" Pin: K-1490: Lightweight SS 'Dog-Bone' Shroud Tang Assembly was designed for use with Shrouds up to 5/32" diameter with standard Eyes. Stamped 'Dog-Bone' Design reduces weight and windage to a minimum. Tang is 4" long x (maximum) 1" wide x .062" with (1) 1/2" mounting hole and includes (1) 1/4" Clevis Pin. Hole centers are 3" apart. Can be mounted on a 1/2" bolt, or with Flange Bushing (K-9630) and a 5/16" bolt for applications where weight is a concern.
'Dog-Bone' Clevis Tang w/ 5/16" Pin: K-1491: Lightweight SS 'Dog-Bone' Shroud Tang Assembly was designed for use with Shrouds up to 3/16" diameter with standard Eyes. Stamped 'Dog-Bone' Design reduces weight and windage to a minimum. Tang is 4" long x (maximum) 1" wide x .062" with (1) 1/2" mounting hole and includes (1) 5/16" Clevis Pin. Hole centers are 3" apart. Can be mounted on a 1/2" bolt, or with Flange Bushing (K-9630) and a 5/16" bolt for applications where weight is a concern.
'Dog-Bone' Clevis Tang w/ 3/8" Pin: K-1492: Lightweight SS 'Dog-Bone' Shroud Tang Assembly was designed for use with Shrouds up to 3/16" diameter with standard Marine Eyes. Stamped 'Dog-Bone' Design reduces weight and windage to a minimum. Tang is 5" long x (maximum) 1 3/8" wide x .090" with (1) 11/16" mounting hole and includes (1) 3/8" Clevis Pin. Hole centers are 3 5/8" apart. Can be mounted on a 5/8" bolt, or with Flange Bushing (K-9631) and a 3/8" bolt for applications where weight is a concern.
'Dog-Bone' Clevis Tang w/ 7/16" Pin: K-1493: Lightweight SS 'Dog-Bone' Shroud Tang Assembly was designed for use with Shrouds that are 7/32" diameter with standard Marine Eyes. Stamped 'Dog-Bone' Design reduces weight and windage to a minimum. Tang is 5" long x (maximum) 1 3/8" wide x 9/64" (.140") with (1) 11/16" mounting hole and includes (1) 7/16" Clevis Pin. Hole centers are 3 5/8" apart. Can be mounted on a 5/8" bolt, or with 11/16" Flange Bushing (K-9631) and a 3/8" bolt for applications where weight is a concern.
'Dog-Bone' Clevis Tang w/ 1/2" Pin: K-1494: Lightweight SS 'Dog-Bone' Clevis Tang Assembly was designed for use with Shrouds up to 9/32" diameter using standard Marine Eyes. Stamped 'Dog-Bone' Design reduces weight and windage to a minimum. Tang is 5" long x (maximum) 1 3/8" wide x 9/64" (.140") with (1) 11/16" mounting hole and includes (1) 1/2" Clevis Pin. Hole centers are 3 5/8" apart. Can be mounted on a 5/8" bolt, or with Flange Bushing (K-9631) and a 3/8" bolt for applications where weight is a concern.
Clevis Tang w/ 1/2" Pin: K-84-1108-8: SS Clevis Tang Assembly was designed for use with Shrouds up to 1/4" diameter using standard Marine Eyes. Tang is 5" long x 1 1/4" wide x.109" with (1) 1/2" mounting hole and includes (1) 1/2" Clevis Pin. Hole centers are 3 1/2" apart; Tang mounts on a 1/2" bolt.
Heavy Clevis Tang w/ 1/2" Pin: K-10485A: Heavy SS Clevis Tang Assembly can be used with Shrouds up to 5/16" diameter using special Marine Eyes. Tang is 5 3/4" long x 1 1/2" wide x 3/16" (.186") with (1) 3/4" mounting hole and includes (1) 1/2" Clevis Pin. Hole centers are 3 3/4" apart. Can be mounted on a 3/4" bolt, or with Flange Bushing (K-10455) and a 1/2" bolt for applications where weight is a concern. was D/K-40545A
Clevis Tang w/ 5/8" Pin: K-10784A: Heavy SS Clevis Tang Assembly was designed for use with Shrouds up to 3/8" diameter using standard Marine Eyes. Tang is 5 3/4" long x 1 1/2" wide x 3/16" (.186") with (1) 3/4" mounting hole and includes (1) 5/8" Clevis Pin. Hole centers are 3 3/4" apart. Can be mounted on a 3/4" bolt, or with Flange Bushing (K-10455) and a 1/2" bolt for applications where weight is a concern. (K-10734 in some old catalogs)
Clevis Tang w/ 3/4" Pin: K-11157A: Heavy Clevis Tang Assembly was designed for use with Shrouds up to 7/16" diameter using standard Marine Eyes. Tang is 7 1/2" long x (maximum) 2" wide x 3/16" (.186") with (1) 3/4" mounting hole and includes (1) 3/4" Clevis Pin. Hole centers are 5 1/4" apart. Can be mounted on a 3/4" bolt, or with Flange Bushing (K-10455) and a 1/2" bolt for applications where weight is a concern. These tangs should be used with SS Bearing Plates or other mast wall reinforcement in all standard applications.
Fixed Clevis Tang w/ 3/4" Pin: K-74112: Heavy SS Clevis Tang Assembly was designed for use with Shrouds up to 7/16" diameter using standard Marine Eyes. Tang is 13 3/4" long x 2 1/2" wide x 3/16" (.186") with (8) 5/16" (upper) and (1) 7/8" (lower) mounting holes. Pin center is 6 1/4" from lower mounting hole. Mounts with (8) 5/16" FH screws and (1) 7/8" bolt, and includes (1) 3/4" Clevis Pin.

Spars, Rigging, and Hardware for Sailboats