Kenyon Exit Blocks

Kenyon Exit Blocks
Exit Blocks incorporate a sheave, and are used to exit any internal control line (halyards, pole lifts, etc.) from a spar where a directional change of 90 to 180 degrees is required.* Kenyon Exit Blocks feature an interior cross-bar to captivate the control line and prevent it from jumping off of the sheave. See also, Exit Blocks – Mixed Vendor Complete List. * See Kenyon Exit Plates for in-line exit applications (Halyard Exits) where there is no directional change.

*Stainless Steel Exit Block: K-11110A:* Internal SS Exit Block is used for halyards, spinnaker pole lifts and other control lines. Aluminum sheave (K-10545-1) is 1 1/2" diameter x 3/8" wide and will handle 1/8" wire, or rope up to 5/16" diameter. Assembly fits in mast cutout 1 3/4" high x 9/16" wide and projects 1 7/8" inside of mast. Mounting flanges are 1 3/4" high x 1 15/16" wide, and are at 90 degrees to the sheave for use on flat surfaces; flanges can also be bent to fit a variety of curved surfaces. Assembly is mounted with (4) #10 (3/16") fasteners on 1 5/16" (vertical) x 1 7/16" (horizontal) hole centers.
*Stainless Steel Exit Block: K-11110A-1:* As K-11110A, above, but mounting flanges already angled for use on curved surfaces. Flanges can be bent more or less, to fit a variety of curved surfaces. Unit now features removable sheave.
*Stainless Steel Exit Block: K-11110A-2:* As K-11110A-1, above, but mounting flanges angled severely for use as Main Halyard Sheave Box on the 2040 Mast Section.
*Aluminum Exit Block: K-1555:* Internal Exit Block is used for halyards, spinnaker pole lifts and other control lines. Welded aluminum block assembly is finished with black epoxy coating. Aluminum sheave (K-198-7A) is 1 3/4" diameter x 31/64" wide and will handle 3/16" wire, or rope up to 7/16" diameter. Assembly fits in mast cutout 2 1/4" high x 3/4" wide and projects 2" inside of mast. Mounting flange is 3 1/4" x 1 1/2" plate, slightly curved to fit a variety of mast surfaces. Assembly is mounted with (4) #10 (3/16") fasteners on 2 7/8" (vertical) x 1 1/8" (horizontal) hole centers. As used on some J/24’s.
*Stainless Steel Exit Block: K-11110P:* Internal SS Exit Block is used for halyards, spinnaker pole lifts and other control lines. Plastic sheave (K-199-4B) is 1 1/2" diameter x 15/32" wide and will handle line up to 3/8" diameter. Assembly fits in mast cutout 1 3/4" high x 11/16" wide and projects 1 7/8" inside of mast. Mounting flanges are 1 3/4" high x 1 15/16" wide, and are at 90 degrees to the sheave for use on flat surfaces; flanges can also be bent to fit a variety of curved surfaces. Assembly is mounted with (4) #10 (3/16") fasteners on 1 5/16" (vertical) x 1 7/16" (horizontal) hole centers.
*Stainless Steel Exit Block: K-11199P:* Internal SS Exit Block is used for halyards, spinnaker pole lifts and other control lines. Plastic sheave (K-8850) is 1 7/8" diameter x 9/16" wide and will handle line up to 7/16" diameter. Assembly fits in mast cutout 2 3/8" high x 13/16" wide and projects 2 1/4" inside of mast. Mounting flanges are 2 3/8" high x 2" wide, and are at 90 degrees to the sheave for use on flat surfaces; flanges can also be bent to fit a variety of curved surfaces. Assembly is mounted with (4) #10 (3/16") fasteners on 1 7/8" (vertical) x 1 1/2" (horizontal) hole centers.
*Stainless Steel Exit Block: K-11199P-1:* As K-11199P, above, but mounting flanges already angled for use on curved surfaces. Flanges can be bent more or less, to fit a variety of curved surfaces.
*Stainless Steel Exit Block: K-11199A:* Internal SS Exit Block is used for halyards, spinnaker pole lifts and other control lines. Aluminum sheave (K-10861-1) is 2" diameter x 9/16" wide and will handle 3/16" wire, or rope up to 1/2" diameter. Assembly fits in mast cutout 2 3/8" high x 13/16" wide and projects 2 1/4" inside of mast. Mounting flanges are 2 3/8" high x 2" wide, and are at 90 degrees to the sheave for use on flat surfaces; flanges can also be bent to fit a variety of curved surfaces. Assembly is mounted with (4) #10 (3/16") fasteners on 1 7/8" (vertical) x 1 1/2" (horizontal) hole centers. Unit now features removable sheave.
*Stainless Steel Exit Block: K-11199A-1:* As K-11199A, above, but mounting flanges already angled for use on curved surfaces. Flanges can be bent more or less, to fit a variety of curved surfaces. Unit now features removable sheave.

Spars, Rigging, and Hardware for Sailboats