Kenyon Flange Bushings

Flange Bushing – 1/2" OD: K-9630: SS Flange Bushing is 1/2" OD x 5/16" ID. Used with a 5/16" bolt it replaces a 1/2" bolt in Shroud Tang applications to achieve maximum weight reduction without any attendant reduction in bearing surface. 1/2" OD Flange Bushing is 1" long, Flange Head is 19/32" diameter x 1/16" thick.
Flange Bushing – 1/2" OD: K-9630-6: SS Flange Bushing is 1/2" OD x 3/8" ID. Used with a 3/8" bolt it replaces a 1/2" bolt in Shroud Tang applications to achieve maximum weight reduction without any attendant reduction in bearing surface. 1/2" OD Flange Bushing is 3/4" long, Flange Head is 3/4" diameter x 1/16" thick.
Flange Bushing – 5/8" OD: K-9630-1008: SS Flange Bushing is 5/8" OD x 1/2" ID. Used with a 1/2" bolt it replaces a 5/8" bolt in Shroud Tang applications to achieve maximum weight reduction without any attendant reduction in bearing surface. 5/8" OD Flange Bushing is 7/8" long, Flange Head is 7/8" diameter x 3/32" thick.
Flange Bushing – 11/16" OD: K-9631: SS Flange Bushing is 11/16" OD x 3/8" ID. Used with a 3/8" bolt it replaces a 5/8" bolt in some Shroud Tang applications (where Tang and mast have 11/16" holes) to achieve maximum weight reduction without any attendant reduction in bearing surface. 11/16" OD Flange Bushing is 1 3/8" long, Flange Head is 7/8" diameter x 1/16" thick.
Flange Bushing – 3/4" OD: K-10455: SS Flange Bushing is 3/4" OD x 1/2" ID. Used with a 1/2" bolt it replaces a 3/4" bolt in Shroud Tang applications to achieve maximum weight reduction without any attendant reduction in bearing surface. 3/4" OD Flange Bushing is 1 3/16" long, Flange Head is 1" diameter x 3/16" thick.
Light Flange Bushing – 3/4" OD: K-10455LS: SS Flange Bushing is 3/4" OD x 1/2" ID. As K-10455, above, but shorter and with a smaller Head to achieve maximum weight reduction. 3/4" OD Flange Bushing is 3/4" long, Flange Head is 7/8" diameter x 1/8" thick.
Flange Bushing – 1" OD: K-10455-1: SS Flange Bushing is 1" OD x 3/4" ID. Used with a 3/4" bolt it replaces a 1" bolt in Shroud Tang applications to achieve maximum weight reduction without any attendant reduction in bearing surface. 1" OD Flange Bushing is 1 7/16" long, Flange Head is 1 1/4" diameter x 3/16" thick.

Spars, Rigging, and Hardware for Sailboats