Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
 Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions
Cape Dory Typhoon Weekender Standard Spars & Parts
Common Replacement Parts are listed below.
Additional specifications and photographs of all components listed below, as well as details of the Spar Sections and additional parts, are available on the Section pages.

The Cape Dory Typhoon Weekender (WE) has a Fractional Rig.  Newer models are Deck-stepped.
Most Typhoon Weekender Masts use the Spartan CD-2 Mast Section.
Most Typhoon Weekender Booms use the Spartan CD-1 Boom Section.
Most Typhoon Weekender Spreaders use the Spartan SP-022 (3/4" OD) Spreader Section.

As there have been many variations in 40 years of production, check part Specifications on the Section pages, and verify Section profiles to insure compatibility.

Typhoon WE Mast & Components - Spartan CD-2 Mast Section
The newer (and more common) Typhoon Weekender models are Deck-stepped, using the SP-661 cast Tabernacle. All Mast Assemblies and Sections listed below refer to these versions. If you have a Typhoon Weekender that is Keel-stepped, or has a different Mast Section, please contact us with details.
Description Part # Price
Typhoon Weekender Standard Mast Assembly Complete. SP-CDTyWMA $ Call
    - Clear Anodized Mast - CD-2 x 23' 9 1/2". Ass'y includes Spreaders, 3/4" Spinnaker
      Track, and all attached hardware, with leaders for halyards. Standard rig is milled
      with pin for SP-661 Tabernacle, and set up for an external Spinnaker halyard. 2245 
Typhoon Weekender Standard Mast Section milled. SP-CDTyWMM $ 779.00
    - Clear Anodized Mast Section - CD-2 x 23' 9 1/2", is milled for gate, exit blocks (2), &
     SP-661 Tabernacle. Upper exit block (Harken ball-bearing for Jib halyard) is included.
Typhoon Weekender Mast Section (for internal Spinnaker), milled. SP-CDTyWMSM $ 879.00
    - Clear Anodized Mast Section - CD-2 x 23' 9 1/2", is milled for gate, exit blocks (3),
      exit plate (port side) and SP-661 Tabernacle. Upper exit blocks (Harken ball-bearing 
      for Jib & Spinnaker halyard), and exit plate are included.
Typhoon Weekender Mast Section, tube only - CD-2 x 23' 9 1/2" SP-CDTyWMT $ 469.00
Masthead Assembly - Complete, w/ Delrin Sheave SP-040P $ 129.00
Masthead Clevis Pin only, 1/4"                        9803 CP 4-34 $ 5.00
Main Halyard Sheave - Plastic, 3/8" ID  OR PP-S5.3D8-6 $ 18.00
Main Halyard Sheave - Aluminum w/ integral bushing, 3/8" ID And PP-S5.3A8-B6 $ 27.00
Main halyard sheave Bushing (Bronze) 3/8" OD x 1/4" ID SP-9523 $ 3.00
Eyestrap for Spinnaker Halyard Block, 4-hole SP-216 $ 6.00
Spinnaker Halyard Swivel Block SP-019BL $ 29.00
Forestay Tang SP-201 $ 5.00
Jib halyard Exit Block - Old style SP-225 $ .00
Jib halyard Exit Block - New style HAR 088 $ 13.00
Shroud Tang for 1/4" Pin (Uppers & Lowers) SP-209 $   7.00
Spreader Base SS (w/ 5/8" OD male stud), includes Clevis Pin SP-302 $ 89.00
Eyestrap for Pole Lift Block, 2-hole SP-215 $  3.00
Spinnaker Pole Lift Swivel Block  SP-019BL $ 29.00
Spinnaker Pole Track - 3/4" Aluminum T-Track x 2'   @2' Mer 7000-102 $ 25.00
End Stop for 3/4" T-Track, Black Mer 4475-210 $ 3.00
Spinnaker Pole Car - 3/4" T-Track or Flat Track Sch 73-26X $ 59.00
Spinnaker Pole Car - 7/8" T-Track or Flat Track Sch 73-27XS $ 59.00
Spinnaker Pole Car - 1" T-Track or Flat Track Sch 73-28X $ 49.00
Sail Slide Stop  SP-11000 $ 12.00
Spar Cleat - 4"  D-10324 $ 15.00
Downhaul Cleat - 3" (slides in track) SP-023 $ 19.00
Halyard Exit Block - Double sheave, at mast base SP-911 $ 149.00
Tabernacle Mast Step Casting SP-661 $ 199.00
Tabernacle Pin Assembly SP-662 $ 19.00
Typhoon WE Spreaders & Parts - Spartan SP-022 Spreader Section
Description Part # Price
Spreader Assembly 3/4" OD - Clear Anodized SP-022AS $ 89.00
Spreader Assembly Set (2 pieces) 3/4" OD - Clear Anodized SP-022AS-2 $ 175.00
Spreader Tube only 3/4" OD x 26" - Clear Anodized SP-022TC-26 $ 49.00
Spreader Tip - Aluminum SP-022T $ 39.00
Spreader Base SS (w/ 5/8" OD male stud), includes Clevis Pin SP-302 $ 89.00
Spreader Base Clevis Pin SS K-CP4-28 $ 7.00
Typhoon WE Boom & Components - Spartan CD-1 Boom Section
Description Part # Price
Typhoon Weekender Boom Assembly - Standard - Clear Anodized SP-CDTyWBA $ 449.00
Typhoon Weekender Boom Tube only, Clear Anodized - CD-1 x 8' 10" SP-CDTyWBT $ 179.00
Gooseneck Assembly with Slide - Standard SP-031FS $ 89.00
Gooseneck Assembly with Slide - Roller Reefing SP-031RS $ 99.00
Gooseneck Replacement Casting only SP-031C $ 39.00
Gooseneck Slide only SP-032 $ 39.00
Gooseneck Toggle only K-9267 $ 10.00
Spar Cleat - 3", Black       #8 FH on 13/16" centers SP-032C $ 9.00
Spar Cleat - 4", Black       #10 FH on 1" centers    SP-026 D-10324 $ 15.00
Vang Ball Attachment Plate, for use with Ball Wire Pennant K-2182 $ 9.00
Vang Wire Pennant Ass'y with swage Ball, 6" long K-2182WP $ 24.00
Mainsheet/Vang Bail for 1/4" bolt K-S9001 $ 9.00
Mainsheet Bail Bolt assembly - 1/4" K-S9001BA $ 4.00
Cheek Block w/ curved base for Outhaul or Reef lines K-140X $ 24.00
Outhaul Assembly with 2 pivoting Tangs SP-033-2 $ 45.00
Outhaul Casting only SP-033 $ 25.00
Typhoon WE - Other Components
Description Part # Price
Typhoon Bronze Outboard Motor Mount Bracket SP 99-31B $ Call
Typhoon Bronze Deck Plate only, for Outboard Motor Mount SP 99-31DP $ 79.00

~ Back to One Design Main Page ~

~ Back to Spartan Spars Main Page ~

~ Back to Rig-Rite Home Page ~