Your cart

Total
CAD
Shipping and discount codes are added at checkout.

Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions

T-Ball Swage & Fittings


T-Ball Backing Plates are used on Masts to provide a sleek, lightweight, non-protruding attachment for Rigging. Common fittings for them include Swage and Mechanical terminals for Wire, as well as those for attachment of Rope and Rod fittings. As measurements vary widely, it is recommended that T-Balls be replaced only with the same type as original.
*Please note that swage terminals are meant for professional installation only, and must be assembled with specialized swaging machines by professionals.  

  T-Ball Fittings
Navtec / Gibb T-Ball Swage Fittings - N741
T-Rings - N743
T-Ball Eyes - N744
OS T-Ball Swage Fittings - OS 741


  Navtec / Gibb T-Ball Swage Fittings - N741
Original Navtec/Gibb T-Ball Swage Fittings for 1x19 and 7-strand Wire Rope are most commonly used for Shrouds and Running Backstays. For use with Navtec / Gibb T-Ball Backing Plates.
 
 
 Part #  Wire Size  Fits Backing Plate  Rubber Plug  
: Gib 741-M02:
 2mm  (2 rivet): Gib 740-3:
 : Gib 742-3:
 
: Gib 741-3:  3/32"   "   " 00
: Gib 741-M03:
 3mm   "   "  
: Gib 741-4:
 1/8"   "   " 00
: Gib 741-M03.5:
 3.5mm   "   "  
: Gib 741-5:
 5/32"/4mm  (4 rivet): Gib 740-5:
 : Gib 742-5:
 
: Gib 741-M05:
 5mm   "   "  
: Gib 741-6X:
 3/16"/Old   "   "  
: Gib 741-6:
 3/16"  (2 rivet): Gib 740-6:
 : Gib 742-6:
 
: Gib 741-7:
 7/32"  (4 rivet): Gib 740-7:
 : Gib 742-7:
 
: Gib 741-8:
 1/4"   "   "  
: Gib 741-9:
 9/32"/7mm   "   "  
: Gib 741-10:
 5/16"/8mm  (5 rivet): Gib 740-10:
 : Gib 742-10:
 
: Gib 741-12:
 3/8"   "   "  
: Gib 741-M10:
 10mm   "   "  
 

  T-Rings - N743
T-Rings with a special smooth Eye for Rope Splicing are commonly used with Running Backstays.
 
 Part #  Fits Backing Plate  Rubber Plug  
: Gib 743-3:
 (2 rivet): Gib 740-3:
 : Gib 742-3:
00
: Gib 743-5:
 (4 rivet): Gib 740-5:
 : Gib 742-5:
 
: Gib 743-6:
 (2 rivet): Gib 740-6:
 : Gib 742-6:
 
: Gib 743-7:
 (4 rivet): Gib 740-7:
 : Gib 742-7:
 
: Gib 743-10:
 (5 rivet): Gib 740-10:
 : Gib 742-10:
 
 

  T-Ball Eyes - N744
T-Ball Swage Fittings are sometimes used for Forestay attachment on smaller boats. Featuring an eye on the bottom of a standard T-Ball, a T-Ball Eye is used with a Rigging Toggle when greater strength and articulation is required, or when adding a Furling System. Both items are required to maintain any Furling warranty.
Suitable for use with both Gibb and OS Backing Plates.
 
 
 Part #  Pin Size  For Wire  Fits Backing Plate  Length  
: OS N744-4:
 1/4"  1/8"/3mm  Gib 740-3, OS 740-4  3" 00
: OS N744-5:
 5/16"/8mm  5/32"/4mm  Gib 740-5, OS 740-4  3 5/8" 00
: OS N744-6:
 3/8"/10mm  3/16"/5mm  Gib 740-5, OS 740-5  4 1/4"  
 

  OS T-Ball Swage Fittings - OS 741
OS T-Ball Swage Fittings for 1x19 and 7-strand Wire Rope are most commonly used for Shrouds and Running Backstays. For use Only with OS T-Ball Backing Plates. *Length is approximate Length OA before swaging.
 
 
 
 Part #  Wire Size  Fits Backing Plate  Length*  
: OS 741-M03:
 1/8"/3mm  : OS 740-4M:
 3 1/2" 00
: OS 741-M04:
 5/32"/4mm   "  "  
: OS 741-M05:
 3/16"/5mm  : OS 740-5M:
 5 1/8"  
: OS 741-7:
 7/32"  : OS 740-6M:
 "  
: OS 741-M06:  6mm   "  "  
: OS 741-8:
 1/4"   "  "  
: OS 741-M07:
 9/32"/7mm  : OS 740-7M:
 7 1/4"  
: OS 741-M08:
 5/16"/8mm  : OS 740-8M:
 8"  
: OS 741-12:
 3/8"  : OS 740-10MCX:
 "  
: OS 741-M10:
 10mm   "  "  
 

~ Back to T-Ball Backing Plates ~

~ Back to Tangs Main Page ~

~ Back to Rigging Main Page ~

~ Home ~