Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com

South Coast Winches


South Coast Winches
South Coast Winches have been out of production for over 30 years. During many years of production South Coast produced several different Types of winches in many Sizes. Some parts not listed here are available on a Custom basis, we will require a sketch of the parts with dimensions and full details including Winch size to quote.
 


South Coast Bronze Winches - Pawls and Springs
South Coast #810 Bronze Winches are the most commonly seen South Coast winches. Sometimes Chrome-plated, these Top-action Halyard and Sheet Winches all used a Flat, Slide-in Bronze Winch Handle similar to those made by Merriman and Wilcox-Crittenden during the same period. Most Winches have the word South Coast, and the size (#1, 2, or 3) stamped in the top.
If you require Parts not listed here, we will require a sketch of the old Parts with dimensions and full details including Winch size.
 


South Coast 810-1 Bronze Winch: SC 810-1:
South Coast 810-1 Bronze Winches all used a Flat, Slide-in Bronze Winch Handle. Most Winches have the word South Coast, and the number 1 stamped in the top. South Coast 810, Size #1 Winches have a Top that is 2 5/8" diameter. These winches are no longer available.

 

 
South Coast 810 Bronze Winch - #1 Pawl Set: SC 810-1K:
Ratchet pawl and spring for South Coast 810 Size #1 Bronze Winches. Includes (1) Pawl and (1) Spring. Cast Bronze Pawl is .685" (maximum) long x .225" thick with hole for pin and slot for spring. Each winch uses a total of four (4) Pawls and Pawl Springs.

 

 
  South Coast 810 #1 - Bronze Pawl only: SC 810-1P:
Pawl only for South Coast #810-1 Bronze Winches. Cast Bronze Pawl is .685" (maximum) long x .225" thick with hole for pin and slot for spring.

 

 
  South Coast 810 #1 - Pawl Spring only: SC 810-1S-4:
SS Pawl Springs only for South Coast #810-1 Bronze Winches. Set includes four (4) Springs.

 

 

South Coast 810-2 Bronze Winch: SC 810-2:
South Coast 810-2 Bronze Winches all used a Flat, Slide-in Bronze Winch Handle. Most Winches have the word South Coast, and the number 2 stamped in the top. South Coast 810, Size #2 Winches have a Top that is 3 1/8" diameter. These winches are no longer available.

 

 
South Coast 810 Bronze Winch - #2 Pawl Set: SC 810-2K:
Ratchet pawl and spring for South Coast 810 Size #2 Bronze Winches. Includes (1) Pawl and (1) Spring. Cast Bronze Pawl is .855" (maximum) long x .275" thick with hole for pin and slot for spring. Each winch uses a total of four (4) Pawls and Pawl Springs.

 

 
  South Coast 810 #2 - Bronze Pawl only: SC 810-2P:
Pawl only for South Coast #810-2 Bronze Winches. Cast Bronze Pawl is .855" (maximum) long x .275" thick with hole for pin and slot for spring.

 

 
  South Coast 810 #2 - Pawl Spring only: SC 810-2S-4:
SS Pawl Springs only for South Coast #810-2 Bronze Winches. Set includes four (4) Springs.

 

 

South Coast 810-3 Bronze Winch: SC 810-3:
South Coast 810-3 Bronze Winches all used a Flat, Slide-in Bronze Winch Handle. Most Winches have the word South Coast, and the number 3 stamped in the top. South Coast 810, Size #3 Winches have a Top that is 4 1/4" diameter. These winches are no longer available.

 

 
South Coast 810 Bronze Winch - #3 Pawl Set: SC 810-3K:
Ratchet pawl and spring for South Coast 810 Size #3 Bronze Winches. Includes (1) Pawl and (1) Spring. Cast Bronze Pawl is 1.20" (maximum) long x .335" thick with hole for pin and slot for spring. Each winch uses a total of four (4) Pawls and Pawl Springs.

 

 
  South Coast 810 #3 - Bronze Pawl only: SC 810-3P:
Pawl only for South Coast #810-3 Bronze Winches. Cast Bronze Pawl is 1.20" (maximum) long x .335" thick with hole for pin and slot for spring.

 

 
  South Coast 810 #3 - Pawl Spring only: SC 810-3S-4:
SS Pawl Springs only for South Coast #810-3 Bronze Winches. Set includes four (4) Springs.  
 

~ Back to Winches Main Page ~

~ Back to Hardware Main Page ~

~ Back to Rig-Rite Home Page ~