 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Bronze T-Track |
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Bronze T-Track |
|
| Bronze T-Track & End Stops |
| T-Track is essentially Flat Track with
an integral riser. Commonly used on deck for Jib and Genoa lead Cars and on the Mast for Spinnaker
and Gooseneck Slides, it allows for easily adjustable placement of load bearing fittings. Most T-Track
has intermediate holes (between the fastener holes) for use with Spring Pin or Screw Pin stops. Merriman Standard Extruded Bronze T-Track is listed below by size (Track width), and length. Aluminum T-Track is listed separately. Metric Aluminum T-Track is listed separately, see Amiot T-Track, and Goiot T-Track. We can also fabricate Stainless Steel T-Track on Special Order, please forward details for a quote. See also, Flat Track and other types of Track on the Track Main Page. |
| Bronze T-Track | |
| 3/4" Bronze T-Track | |
|
3/4" Bronze T-Track - 3 foot long: Mer 4471-3': 3/4" Bronze T-Track - 7 foot long: Mer 4471-7': 3/4" Bronze T-Track - 14 foot long: Mer 4471-14': 3/4" Bronze T-Track is an extruded T-Track that is 3/4" (22mm) wide with a 1/8" (3mm) thick flange, and is (maximum) 5/16" (8mm) high. Track is drilled for 1/4" (6mm) FH screws on 4" (102mm) centers, and has 1/4" diameter stop holes in between.
|
 |
| End Stop for 3/4" Bronze T-Track: Mer 4471-S: Burnished cast Bronze End Stop for 3/4" T-Track fastens with a 1/4" (6mm) FH screw.
|
|
|
|
|
| 1" Bronze T-Track | |
|
1" Bronze T-Track - 3 foot long: Mer 4472-3': 1" Bronze T-Track - 7 foot long: Mer 4472-7': 1" Bronze T-Track - 14 foot long: Mer 4472-14': 1" Bronze T-Track is an extruded T-Track that is 1" (25mm) wide with a 1/8" (3mm) thick flange, and is (maximum) 3/8" (10mm) high. Track is drilled for 1/4" (6mm) FH screws on 4" (102mm) centers, and has 1/4" diameter stop holes in between.
|
 |
| End Stop for 1" Bronze T-Track: Mer 4472-S: Burnished cast Bronze End Stop for 1" T-Track fastens with a 1/4" (6mm) FH screw.
|
|
|
|
|
| 1 1/4" Bronze T-Track | |
| 1 1/4" Bronze T-Track - 3 foot long: Mer 4473-3': 1 1/4" Bronze T-Track - 7 foot long: Mer 4473-7': 1 1/4" Bronze T-Track - 10 foot long: Mer 4473-10': 1 1/4" Bronze T-Track is an extruded T-Track that is 1 1/4" (32mm) wide with a 3/16" (5mm) thick flange, and is (maximum) 7/16" (11mm) high. Track is drilled for 5/16" (8mm) FH screws on 4" (102mm) centers, and has 3/8" diameter stop holes in between.
|
 |
| End Stop for 1 1/4" Bronze T-Track: Mer 4473-S: Burnished cast Bronze End Stop for 1 1/4" T-Track fastens with a 5/16" (8mm) FH screw. |
|