Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions

Genoa (Jib) Cars for 1 1/4" T-Track


These Genoa Cars or Slides (Jib Slides, Jib Cars, Jib or Genoa Lead Blocks) are designed to fit on U.S. Standard 1 1/4" T-Track (1 1/4" x 3/16") and are held in position on the track either by a spring or screw pin, or by means of a line control system. Racing boats, will often use a line control system, for ease of use and precise adjustment.
Genoa Cars are of two primary varieties: Loop Cars (with Bail) for attachment of blocks or lines, and Genoa Lead Blocks (Cars with an integral Sheave).

For Genoa Cars or Slides for other Tracks, See Genoa Cars. See also: Track.

Genoa Loop Cars for 1 1/4" T-Track

Genoa Lead Blocks for 1 1/4" T-Track

34t-trk.gif (1058 bytes)

Genoa Loop Cars for 1 1/4" T-Track
Genoa Loop Cars include an Eye or Bail (most commonly) used with a separate Swivel Block for a Genoa or Jib sheet lead, but have many other uses including attachment of fenders, dock lines, preventers etc..
 
Genoa Car w/ Spring Pin for 1 1/4" T-Track: ABI 72-50CX:
Cast SS Genoa Car with Spring Pin stop to fit 1 1/4" T-Track. Investment Cast SS Slide has 3/8" x 1" ID Bail. Slide is 3 1/2" long x 1 11/16" wide.

 

Genoa Car w/ Spring Pin & Liners for 1 1/4" T-Track: Sch 72-49:
Welded SS Genoa Car with Spring Pin stop to fit 1 1/4" T-Track. Formed SS Slide with plastic liners is welded to 3/8" x 1" ID Bail. Slide is 4" long x 1 11/16" wide. Replacement plastic liners, Sch 172LP-T4, are available separately, below.

 

Replacement Liners for Sch 1 1/4" Genoa Cars: Sch 172LP-T4:
Replacement Liners for Sch 72-49 and other 4" long Genoa Cars for 1 1/4" T-Track. Black plastic liners are 3 15/16" long with bottom protrusions and side tabs to hold them in place when Car is removed from track. Sold in pairs only.  

 

Replacement Liners for Sch 1 1/4" Genoa Cars: Sch 172LP-4:
Replacement Liners for Schaefer 4" long Track Slides for 1 1/4" T-Track extend beyond the end of the Slide. For old-style Slides without underside notches. Black plastic liners are (maximum) 4 1/4" long. Sold in pairs only.

 

 

 

Replacement Screw Pin for Sch 1 1/4" Cars: Sch 172SP:
Replacement Thumb Screw Pin for Sch 11-91X and other Schaefer Cars and Slides for 1 1/4" T-Track. SS Screw Pin has 7/8" knurled head with a 7/16-20 thread and a 3/8" tip. Screw is 9/16" long beneath the Head.

 

 

Genoa Lead Blocks for 1 1/4" T-Track
Genoa Lead Blocks for 1 1/4" T-Track are available in a variety of configurations, including Stand-up, Half-Moon, Twin-Sheet and Towable Block varieties.
 
07 SS Genoa Lead Block w/ Spring Pin & Liners for 1 1/4" T-Track: Sch 705-92:
SS Genoa Lead Block has Stainless Steel Block on stand-up spring. Unit locks in place on T-Track with a Spring Pin stop and features plastic liners to reduce sliding friction. Formed SS Slide is 4" long x 1 11/16" wide, SS Block has a 2 3/8" delrin sheave for line up to 1/2" diameter. Unit has a Safe Working Load of 2250 lbs (1020 kg), and is suitable for use on most boats up to 33' (10M) LOA. Replacement Liners, Sch 172LP-T4, below, are also available.

 

 
07 Genoa Lead Block w/ Spring Pin & Liners for 1 1/4" T-Track: Sch 704-92:
SS Genoa Lead Block has Black Aluminum Block on stand-up spring. Unit locks in place on T-Track with a Spring Pin stop and features plastic liners to reduce sliding friction. Formed SS Slide is 4" long x 1 11/16" wide, Black Aluminum Block has a 2 3/8" delrin sheave for line up to 1/2" diameter. Unit has a Safe Working Load of 2250 lbs (1020 kg), and is suitable for use on most boats up to 33' (10M) LOA. Replacement Liners, Sch 172LP-T4, below, are also available.

 

 
08 SS Genoa Lead Block w/ Spring Pin & Liners for 1 1/4" T-Track: Sch 08-92:
SS Genoa Lead Block has Stainless Steel Block on stand-up spring. Unit locks in place on T-Track with a Spring Pin stop and features plastic liners to reduce sliding friction. Formed SS Slide is 4" long x 1 11/16" wide, SS Block has a 2 3/8" delrin sheave for line up to 1/2" diameter. Unit has a Safe Working Load of 2750 lbs (1250 kg), and is suitable for use on most boats up to 38' (11.5M) LOA. Replacement Liners, Sch 172LP-T4, below, are also available.

 

 
010 SS Genoa Lead Block w/ Spring Pin & Liners for 1 1/4" T-Track: Sch 10-92-UC:
SS Genoa Lead Block has Stainless Steel Block on stand-up spring. Unit locks in place on T-Track with a Spring Pin stop and features plastic liners to reduce sliding friction. Formed SS Slide is 4" long x 1 11/16" wide, SS Block has a 3 1/4" delrin sheave for line up to 5/8" diameter. Unit has a Safe Working Load of 3750 lbs (1700 kg), and is suitable for use on most boats up to 44' (13.5M) LOA. Replacement Liners, Sch 172LP-T4, below, are also available.

 

 
Replacement Liners for Sch 1 1/4" Genoa Cars: Sch 172LP-T4:
Replacement Liners for Sch 705-92 and other 4" long Genoa Cars for 1 1/4" T-Track. Black plastic liners are 3 15/16" long with bottom protrusions and side tabs to hold them in place when Car is removed from track. Sold in pairs only.  

 

011 Genoa Lead Block w/ Screw Pin for 1 1/4" T-Track: Sch 11-91X:
SS Genoa Lead Block has Black Aluminum Block on stand-up spring. Unit locks in place on T-Track with a Screw Pin stop. Formed SS Slide is 4" long x 1 1/2" wide, Black Aluminum Block has a 3 1/4" delrin sheave for line up to 5/8" diameter. Unit has a Safe Working Load of 3750 lbs (1700 kg), and is suitable for use on most boats up to 44' (13.5M) LOA.

 

 

 

Replacement Screw Pin for Sch 1 1/4" Cars: Sch 172SP:
Replacement Thumb Screw Pin for Sch 11-91X and other Schaefer Cars and Slides for 1 1/4" T-Track. SS Screw Pin has 7/8" knurled head with a 7/16-20 thread and a 3/8" tip. Screw is 9/16" long beneath the Head.  

 

 

Half-Moon Genoa Lead Block for 1 1/4" T-Track: Sch 32-03-UC:
Hinged Half-Moon Block has rugged, 'offshore' design providing a low winch lead while spreading sheet loads over several track fasteners. Spring pin stop location in the center of the block prevents snagging and accidental release. Designed to articulate up to 45 to either side of the track, Half-Moon lead blocks are often used to provide a proper lead angle to foot or turning blocks near the cockpit. Stainless, bolted construction allows complete disassembly for inspection or maintenance. SS Slide is 4" long x 1 11/16" wide and features plastic liners to reduce sliding friction. Heavy-Duty SS Cage is spring supported and houses 3 1/4" Aluminum UC Sheave with Torlon ball bearings for line up to 5/8" diameter. Unit has a Safe Working Load of 3000 lbs (1360 kg) and is suitable for use on most boats up to 33' (10M) LOA. Replacement Liners, Sch 172LP-T4, below, are also available.

 

 
Replacement Liners for Sch 1 1/4" Genoa Cars: Sch 172LP-T4:
Replacement Liners for Sch 72-49 and other 4" long Genoa Cars for 1 1/4" T-Track. Black plastic liners are 3 15/16" long with bottom protrusions and side tabs to hold them in place when Car is removed from track. Sold in pairs only.  

 

Half-Moon Genoa Lead Block for 1 1/4" T-Track: Sch 32-33X:
Hinged Half-Moon Block has rugged, 'offshore' design providing a low winch lead while spreading sheet loads over several track fasteners. Spring pin stop location in the center of the block prevents snagging and accidental release. Designed to articulate up to 45 to either side of the track, Half-Moon lead blocks are often used to provide a proper lead angle to foot or turning blocks near the cockpit. Stainless, bolted construction allows complete disassembly for inspection or maintenance. SS Slide is 5 1/2" long x 1 9/16" wide, Heavy-Duty SS Cage is spring supported and houses 3 1/4" Aluminum Sheave for line up to 3/4" diameter. Unit has a Safe Working Load of 5000 lbs (2270 kg) and is suitable for use on most boats up to 44' (10M) LOA. Limited Availability.

 

 

 

Half-Moon Genoa Lead Block for 1 1/4" T-Track: Sch 32-33UC:
Hinged Half-Moon Block has rugged, 'offshore' design providing a low winch lead while spreading sheet loads over several track fasteners. Spring pin stop location in the center of the block prevents snagging and accidental release. Designed to articulate up to 45 to either side of the track, Half-Moon lead blocks are often used to provide a proper lead angle to foot or turning blocks near the cockpit. Stainless, bolted construction allows complete disassembly for inspection or maintenance. SS Slide is 5 1/2" long x 1 9/16" wide and features plastic liners to reduce sliding friction, Heavy-Duty SS Cage is spring supported and houses 3 1/4" Aluminum UC Sheave with Torlon ball bearings for line up to 3/4" diameter. Unit has a Safe Working Load of 5000 lbs (2270 kg) and is suitable for use on most boats up to 44' (10M) LOA. Replacement Liners, Sch 172LP-T5, below, are also available.

 

 
Replacement Liners for Sch 1 1/4" Genoa Cars: Sch 172LP-T5:
Replacement Liners for Sch 32-33UC and other 5" long Genoa Cars for 1 1/4" T-Track. Black plastic liners are 4 15/16" long with bottom protrusions and side tabs to hold them in place when Car is removed from track. Sold in pairs only.

 


Twin-Sheet Genoa Lead Blocks for 1 1/4" T-Track
Twin-Sheet Lead Blocks allow for use of two (2) sheets going through a wide flared sheave, permitting easy sail changes. Blocks provide a low profile articulating sheave for a proper lead from the sail through the block and into cockpit.
 
Twin-sheet Genoa Car for 1 1/4" T-Track - Black: Sch 32-97:
Twin-Sheet Lead Block for 1 1/4" T-Track has Black Anodized finish and 2" wide Aluminum sheave on Nomex/Teflon Bearing for low-friction and high-strength. Extruded Aluminum Slide is (maximum) 4 1/2" long x 1 3/4" wide and locks in place on T-Track with a SS Spring Pin stop. Unit has a Safe Working Load of 3500 lbs. (1590 kg), and is suitable for use on most boats up to 38' (11.5M) LOA.

 

 
Twin-sheet Genoa Car for 1 1/4" T-Track - Silver: Sch 32-98:
Twin-Sheet Lead Block for 1 1/4" T-Track has clear Anodized finish and 2" wide Aluminum sheave on Nomex/Teflon Bearing for low-friction and high-strength. Extruded Aluminum Slide is (maximum) 4 1/2" long x 1 3/4" wide and locks in place on T-Track with a Spring Pin stop. Unit has a Safe Working Load of 3500 lbs. (1590 kg), and is suitable for use on most boats up to 38' (11.5M) LOA.

 

 

Towable Twin-sheet Genoa Car w/ Liners for 1 1/4" T-Track: Sch 17-51X:
Heavy-duty Towable Twin-sheet Genoa Car for 1 1/4" T-Track. Formed SS Slide with plastic liners and welded towing bails has articulating Aluminum carriage with a 2" wide Aluminum sheave. Normally used with a purchase to bring it forward (under load) and a bungee cord aft to keep it taut. Slide (with bails) is (maximum) 6 1/2" long x 1 11/16" wide. Replacement plastic liners, Sch 172LP-T5, (and Sch 172LP-5, for old-style Cars) are available separately, below. Limited Availability.

 

Replacement Liners for Sch 1 1/4" Genoa Cars: Sch 172LP-T5:
Replacement Liners for Sch 17-51X and other 5" long Genoa Cars for 1 1/4" T-Track. Black plastic liners are 4 15/16" long with bottom protrusions and side tabs to hold them in place when Car is removed from track. Sold in pairs only.

 

Replacement Liners for Sch 1 1/4" Genoa Cars: Sch 172LP-5:
Replacement Liners for Old-style Sch 17-51X Genoa Cars (and other 5" slides) for 1 1/4" T-Track. Black plastic liners are (maximum) 5 1/4" long. Sold in pairs only.

~ Back to Track Main Page ~

~ Back to Sailboat Hardware Main Page ~

~ Back to Rig-Rite Home Page ~