 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Flat Track |
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Flat Track |
|
| SS Flat Track |
| Stainless Steel Flat Track is commonly used on deck for Jib
and Genoa lead Cars, and on the Mast for Spinnaker and Gooseneck Slides. It is installed on top of a riser
(metal, phenolic or wood) to allow room for the lower flanges of Slides and Cars. It is the heavy-duty precursor of
Aluminum T-Track which incorporates an integral riser. All Flat Track is attached with Flat Head screws,
and has intermediate holes for use with Spring Pin or Screw Pin stops. Flat Track is listed below by size
(Track width), and length. If you require Flat Track in sizes or lengths not listed here, we can fabricate
any configuration on special order, please forward a sketch with measurements and details for a quote.
|
| 3/4" SS Flat Track | |
| 3/4" x 1/8" SS Flat Track x 3' long: Sch 75-26X-3': 3/4" Stainless Steel Flat Track is 3/4" wide x 1/8" thick and is drilled for 3/16" (#10, or 5mm) FH screws on 3" (76mm) centers with 3/16" diameter stop holes centered between mounting holes. Produced in type 304 Stainless Steel and stocked in 3' lengths.
|
 |
| 7/8" SS Flat Track | |
| 7/8" x 1/8" SS Flat Track x 2' long: Sch 75-27X-2': 7/8" x 1/8" SS Flat Track x 4' long: Sch 75-27X-4': 7/8" Stainless Steel Flat Track is 7/8" wide x 1/8" thick and is drilled for 3/16" (#10, or 5mm) FH screws on 3 3/4" (95mm) centers with 3/16" diameter stop holes centered between mounting holes. Produced in type 304 Stainless Steel and stocked in 2' and 4' lengths.
|
|
| 1" SS Flat Track | |
|
1" x 1/8" SS Flat Track x 1'3" (15") long: Sch 75-28X-1.25: 1" x 1/8" SS Flat Track x 4' long: Sch 75-28X-4: 1" x 1/8" SS Flat Track x 6' long: Sch 75-28X-6: 1" x 1/8" SS Flat Track x 12' long: Sch 75-28X-12: 1" Stainless Steel Flat Track is 1" wide x 1/8" thick and is drilled for 1/4" (6mm) FH screws on 4" (102mm) centers, and has 1/4" diameter stop holes centered between mounting holes. Produced in type 304 Stainless Steel, it is available in lengths up to 12'.
|
|
| 1" x 1/8" SS Flat Track x 2 1/2' long w/ End Stop: Sch 75-28X-2.5E: 1" x 1/8" SS Flat Track x 4' long w/ End Stop: Sch 75-28X-4E: |
|
| 1" Stainless Steel Flat Track is 1" wide x 1/8" thick and is drilled for
1/4" (6mm) FH screws on 4" (102mm) centers, and has 1/4" diameter stop holes
centered between mounting holes. Track has integral welded End Stop on one end. Produced in type 304
Stainless Steel and stocked in 2' 5", and 4' lengths.
|
|
| 1 1/4" SS Flat Track | |
| 1 1/4" x 3/16" SS Flat Track x 4' long: Sch 75-30X-4':
1 1/4" x 3/16" SS Flat Track x 6' long: Sch 75-30X-6': 1 1/4" x 3/16" SS Flat Track x 8' long: Sch 75-30X-8': 1 1/4" Stainless Steel Flat Track is 1 1/4" wide x 3/16" thick and is drilled for 5/16" (8mm) FH screws on 4" (102mm) centers, and has 5/16" diameter stop holes centered between mounting holes. Produced in type 304 Stainless Steel and stocked in 4', 6' and 8' lengths.
|
|
| 1 1/4" x 3/16" SS Flat Track x 2 1/2' long w/ End Stop: Sch 75-30X-2.5E: | |
| 1 1/4" x 3/16" SS Flat Track x 5' long w/ End Stop: Sch 75-30X-5E: | |
| 1 1/4" Stainless Steel Flat Track is 1 1/4" wide x 3/16" thick and is drilled for 5/16" (8mm) FH screws on 4" (102mm) centers, and has 5/16" diameter stop holes centered between mounting holes. Track has integral welded End Stop on one end. Produced in type 304 Stainless Steel and stocked in 2'5", and 5' lengths. | |