Rudder and Tiller Heads

Rudder and Tiller Heads
What is Commonly referred to as a Rudder Head Assembly is actually comprised of two pieces, the Tiller Head and the Rudder Head. The Tiller Head is the hardware that attaches directly to the Tiller and allows for connection to the Rudder Head. The Rudder Head is the hardware that attaches to the top of the Rudder Shaft or, on smaller boats, directly to the Rudder itself. We also stock a number of items not listed here, and can fabricate Custom items as well. If you require Tiller Heads or Rudder Heads not listed here, please forward a sketch of the configuration you require with details and complete dimensions. Rudder Head Assemblies Rudder Heads Tiller Heads

Rudder Head Assemblies Standard Rudder Head Assemblies are listed below, individual parts of these Assemblies are available separately. Tiller Heads are at 90 degrees to the Rudder Shaft unless otherwise noted.
Bronze Rudder Head Assembly for 3/4" Shaft: PP 83-975BA: Cast Bronze Rudder Head Assembly for use with 3/4" diameter Rudder Shaft and 1 3/8" wide Tiller. Rudder Head *(PP-83-975BR)* fits 3/4" Shaft with a 3/16" wide key on the forward side, and features screw for clamping it on the Shaft, and an adjustment screw for tightening the key in the keyway. Tiller Head *(PP-83-975BT)* fits over, and attaches to, 1 1/4" wide Rudder Head with 3/8" bolt, and to 1 3/8" wide Tiller using (2) 1/4"-20 FH machine screws. Tiller Head is designed to hold Tiller at 90 degrees to the Rudder Shaft. Cast Bronze Tiller Head is 7 7/8" long. As used on (most) Cape Dory Typhoon, and some CD 25's.
Bronze Rudder Head Assembly for 1" Shaft: PP 83-910BA: Cast Bronze Rudder Head Assembly for use with 1" diameter Rudder Shaft and 1 3/4" wide Tiller. Rudder Head *(PP-83-910BR)* fits 1" Shaft with a 1/4" wide key on the aft side, and features screw for clamping it on the Shaft, and an adjustment screw for tightening the key in the keyway. Tiller Head *(PP-83-910BT)* fits over, and attaches to, 1 3/4" wide Rudder Head with 3/8" bolt, and to 1 3/4" wide Tiller using (3) 5/16" bolts and nuts, or solid Bronze rivets. Tiller Head is designed to hold Tiller at 90 degrees to the Rudder Shaft. Cast Bronze Tiller Head is 11" long.
Bronze Rudder Head Assembly for 1 1/8" Shaft: PP 83-918BA: Cast Bronze Rudder Head Assembly for use with 1 1/8" diameter Rudder Shaft and 1 3/4" wide Tiller. Rudder Head *(PP-83-918BR)* fits 1 1/8" Shaft with a 1/4" wide key on the aft side, and features screw for clamping it on the Shaft, and an adjustment screw for tightening the key in the keyway. Tiller Head *(PP-83-910BT)* fits over, and attaches to, 1 3/4" wide Rudder Head with 3/8" bolt, and to 1 3/4" wide Tiller using (3) 5/16" bolts and nuts, or solid Bronze rivets. Tiller Head is designed to hold Tiller at 90 degrees to the Rudder Shaft. Cast Bronze Tiller Head is 11" long.
Bronze Rudder Head Assembly for 1 1/4" Shaft: PP 83-914BA: Cast Bronze Rudder Head Assembly for use with 1 1/4" diameter Rudder Shaft and 1 3/4" wide Tiller. Rudder Head *(PP-83-914BR)* fits 1 1/4" Shaft with a 1/4" wide key on the aft side, and features screw for clamping it on the Shaft, and an adjustment screw for tightening the key in the keyway. Tiller Head *(PP-83-910BT)* fits over, and attaches to, 1 3/4" wide Rudder Head with 3/8" bolt, and to 1 3/4" wide Tiller using (3) 5/16" bolts and nuts, or solid Bronze rivets. Tiller Head is designed to hold Tiller at 90 degrees to the Rudder Shaft. Cast Bronze Tiller Head is 11" long.

Rudder Heads Rudder Heads are listed by the diameter (Outside Diameter) of the Rudder Shaft to which they attach.
Bronze Rudder Head for 3/4" Shaft: PP 83-975BR: Cast Bronze Rudder Head fits 3/4" Rudder Shaft with a 3/16" wide key on the Forward side, and features 1/4" bolt for clamping it to the Shaft, as well as an adjustment screw for tightening the key into the keyway. Rudder Head is (maximum) 1 1/4" wide with 3/8" hole on aft side for Tiller Head bolt, and fits over top 2 1/8" of Rudder Shaft. Frequently used with Bronze Tiller Head *(PP-83-975BT)* for 1 3/8" wide Tiller.
Bronze Rudder Head for 1" Shaft: PP 83-910BR: Cast Bronze Rudder Head fits 1" Rudder Shaft with a 1/4" wide key on the Aft side, and features 5/16" bolt for clamping it to the Shaft, as well as an adjustment screw for tightening the key into the keyway. Rudder Head is (maximum) 1 3/4" wide with 3/8" hole on aft side for Tiller Head bolt, and fits over top 2 1/4" of Rudder Shaft. Frequently used with Bronze Tiller Head *(PP-83-910BT)* for 1 3/4" wide Tiller.
Bronze Rudder Head for 1 1/8" Shaft: PP 83-918BR: Cast Bronze Rudder Head fits 1 1/8" Rudder Shaft with a 1/4" wide key on the Aft side, and features 5/16" bolt for clamping it to the Shaft, as well as an adjustment screw for tightening the key into the keyway. Rudder Head is (maximum) 1 3/4" wide with 3/8" hole on aft side for Tiller Head bolt, and fits over top 2 1/4" of Rudder Shaft. Frequently used with Bronze Tiller Head *(PP-83-910BT)* for 1 3/4" wide Tiller.
Bronze Rudder Head for 1 1/4" Shaft: PP 83-914BR: Cast Bronze Rudder Head fits 1 1/4" Rudder Shaft with a 1/4" wide key on the Aft side, and features 5/16" bolt for clamping it to the Shaft, as well as an adjustment screw for tightening the key into the keyway. Rudder Head is (maximum) 1 3/4" wide with 3/8" hole on aft side for Tiller Head bolt, and fits over top 2 1/4" of Rudder Shaft. Frequently used with Bronze Tiller Head *(PP-83-910BT)* for 1 3/4" wide Tiller.
Weld-in Aluminum Rudder Head for 2 3/8" OD Shaft: PP-83-RSA126: Special cast aluminum Rudder Head is designed to be welded into Aluminum Rudder Shaft. For use with 2 3/8" OD x 1 7/8" ID Aluminum Rudder Shaft, unit has 1 1/4" wide projection with 1/2" hole for Tiller Head attachment. Cast Rudder Head is (maximum) 2 3/8" diameter x 4 3/4" long, and projects 2 3/4" beyond end of Rudder Shaft. As used on many Pearson 26's, and others.

Tiller Heads Standard Tiller Heads are listed by the width of the Rudder Head to which they attach.
*Bronze Tiller Head for 1 1/4" wide Rudder Head: PP-83-975BT:* Bronze Tiller Head fits over, and attaches to, 1 1/4" wide Rudder Head with 3/8" bolt, and to 1 3/8" wide Tiller using (2) 1/4"-20 FH machine screws. Cast Bronze Tiller Head is 7 7/8" long. As used on a variety of boats including Cape Dory Typhoon (most), and some CD 25's.
*SS Tiller Head for 1 1/2" wide Rudder Head: PP-83-TS127:* Stainless Steel Tiller Head fits over, and attaches to, 1 1/2" wide Rudder Head with 3/8" bolt, and to 1 1/2" wide Tiller using (3) horizontal and (2) vertical 1/4" bolts. Formed, welded SS assembly is (maximum) 8 3/4" long x 1 7/8" wide x 2" high. As used on some O'Day 27's, and others. *Replaces earlier Aluminum version.*
*SS Tiller Head for 1 9/16" wide Rudder Head: Sch 83-01X:* Stainless Steel Tiller Head fits over, and attaches to, 1 9/16" wide Rudder Head (or directly to the top of the Rudder) with 3/8" bolt, and to 1 9/16" wide Tiller using (2) horizontal 1/4" bolts on 2 1/4" centers. Welded SS assembly is (maximum) 7 3/4" long x 2 1/16" wide x 1 1/4" high. As used on some O'Day Mariner, 19, 23, 25, 26's, and others.
*Bronze Tiller Head for 1 3/4" wide Rudder Head: PP-83-910BT:* Bronze Tiller Head fits over, and attaches to, 1 3/4" wide Rudder Head with 3/8" bolt, and to 1 3/4" wide Tiller using (3) 5/16" bolts and nuts, or solid Bronze rivets. Cast Bronze Tiller Head is 11" long. As used on a variety of boats including many Cape Dory's.
*SS Tiller Head for 1 3/4" wide Rudder Head: PP-83-TS123:* Stainless Steel Tiller Head fits over, and attaches to, 1 3/4" wide Rudder Head with 5/16" bolt, and to 1 5/16" wide Tiller using (1) 1/4" and (2) 5/16" bolts. Formed, welded SS assembly is (maximum) 8 1/2" long x 2 1/8" wide x 1 1/2" high. As used on some O'Day Tempests, O'Day 23's, and others.

Spars, Rigging, and Hardware for Sailboats