Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com         Ordering/Questionsp

Goiot Hatches & Hatch Parts


Goiot Hatches and Hatch Parts
Goiot Hatches and Ports, made in France, are found on a variety of Yachts built around the world. Their original Cast Aluminum, now "Tradition" series, are among the most respected anywhere. In addition to the Tradition series, Goiot manufactures a wide range of Hatches now including the Cristal, Opal, Evolution, and Integration series in a variety of materials and finishes.
 



Goiot Hatches

Goiot Hatches are available in the cast Tradition series, as well as the Cristal, Opal, Evolution, and Integration series'. For replacement Hatches please contact us with Outside (maximum) Dimensions of the Deck Flange, or Glass size and details.

 


Goiot Hatch Parts
Commonly requested replacement parts for a variety of Goiot Hatches are listed below. For parts not listed please contact us with measurements and details.

Tradition Hatch Parts
Evolution Hatch Parts
Cristal & Integration Hatch Parts
Opal Hatch Parts

Replacement Gasket
Fly (mosquito) Screens
Replacement Glass (Acrylic)

 


Tradition Hatch Parts
Commonly requested replacement parts for a variety of Goiot Tradition Hatches are listed below. For parts not listed please contact us with measurements and details.
 

Handle Ass'y, Tradition Hatch - Left Complete: Goi HT-HLA:
Left side Black plastic Handle Assembly includes Inside Handle and Top Cap with washers, O-ring and screw. Outside Handle, listed below, is Optional and replaces Top Cap. Used on Goiot cast Tradition series. 9494A

 

 
  Handle, Tradition Hatch - Left: Goi HT-HL:
Left side Black plastic Inside Handle is 5 7/8" (150mm) long, Used on Goiot cast Tradition series. 9494

 

Handle Ass'y, Tradition Hatch - Right Complete: Goi HT-HRA:
Right side Black plastic Handle Assembly includes Inside Handle and Top Cap with washers, O-ring and screw. Outside Handle, listed below, is Optional and replaces Top Cap. Used on Goiot cast Tradition series. 9495A

 

 
  Handle, Tradition - Right: Goi HT-HR:
Right side Black plastic Inside Handle is 5 7/8" (150mm) long, Used on Goiot cast Tradition series. 9495

 

  Top Cap for Tradition Hatch Handle: Goi HT-TC:
Top Cap for Hatch Handle fits on the outside of Hatch. Black plastic Top Cap has square stud that mates with Handle socket. Unit is 35mm (1 3/8") OD x 44mm (1 3/4" long) with 19mm OD (maximum) stud and includes O-ring. Used on Goiot Tradition series. 9492

 

   

 

O-ring for Top Cap - 4-pack: Goi HT-TC-OR4:
O-ring for Hatch Handle Top Cap / Outside Handle. Used on Goiot Tradition, Evolution, Cristal, and Integration series Hatches, O-rings are sold in packs of four (4) pieces.

 

 
  Outside Handle for Tradition Hatch: Goi HT-HOS:
Optional Outside Handle allows opening Hatch from the outside. Black plastic Handle replaces Top Cap and has square stud that mates with inside Handle. Unit is (maximum) 35mm (1 3/8") wide and includes O-ring. Used on Goiot cast Tradition series. 9490

 


Handle Ass'y, Tradition Escape Hatch - Left: Goi HT-HLA-A:
Left side Aluminum Handle Assembly for Goiot cast Tradition Escape Hatches includes Inside and Outside Handles with washers, O-ring, screw and SS Key. Inside Handle is 122mm (4 7/8") long, Outside Handle is 110mm (4 5/16") long.

 

Handle Ass'y, Tradition Escape Hatch - Right: Goi HT-HRA-A:
Right side Aluminum Handle Assembly for Goiot cast Tradition Escape Hatches includes Inside and Outside Handles with washers, O-ring, screw and SS Key. Inside Handle is 122mm (4 7/8") long, Outside Handle is 110mm (4 5/16") long.

 


Hatch Handle Seat for Corner, Tradition Series: Goi HT-HSC:
Cast Aluminum Seat for Hatch Handle attaches to Hatch frame corner with (2) 3/16" (5mm) rivets (included). Aluminum Handle Seat is 69mm (2 3/4") long x (maximum) 18mm (3/4") wide. Two (2) each used on all Goiot Tradition series Hatches with 2 Handles. 101711-1

 

Hatch Handle Seat, Tradition 34.20: Goi HT-HSF-1:
Black plastic Seat for Hatch Handle attaches to Hatch frame with (2) 3/16" (5mm) rivets (included). Black plastic Handle Seat is 76mm (3") long x (maximum) 18mm (3/4") wide. Used on Goi HT34.20 Tradition Hatch with single Handle. 93476-1

 

Friction Ring for Spring - 4-pack: Goi HT-FR-4:
Heavy Black plastic washers (Friction Rings) are used to increase Spring tension that keeps Hatch open. Rarely does a Spring need replacing, but Spring tension decreases as these Rings wear. Used on Goiot Tradition and Cristal Hatches, Friction Rings are 27mm OD x 12mm ID and are sold in packs of four (4) pieces. 95346/105743

 


Dog Screw - 8mm: Goi PT-DS8:
Dog Screw has 8mm thread with an 8mm cross hole. Aluminum Dog Screw is (maximum) 44mm (1 3/4") long. Used on Goiot original Tradition Hatches. 9130

 

Dog Screw for Two-way Hatches - 8mm: Goi HT-DS8-2:
Dog Screw has 8mm thread with an 8mm x 26mm (1") cross-pin. Aluminum Dog Screw is (maximum) 59mm (1 3/4") long. Used on Goiot Two-way opening Tradition Hatches. 9131E

 

Female Knob for 8mm Stud: Goi PT-KF8:
Black plastic Knob is threaded for standard 8mm Dog stud. Used on a variety of Goiot Ports and Hatches, fluted Knob is 1 3/4" (44mm) OD x 1" high, threaded for a 8mm stud. 9224

 

Male Knob w/ 8mm Screw: Goi HT-KM8:
Black plastic Knob has integral 8mm threaded Aluminum screw. Used on some Goiot Tradition and Cristal Hatches, fluted Knob is 1 3/4" (44mm) OD x 1" high, 8mm screw is 13mm (1/2") long. 9225

 

Hinge Pin - 10mm: Goi HT-HP10:
Black plastic self-locking Hinge Pin is 10mm x 36mm long (3/8" x 1 7/16"). Used on a variety of Goiot Tradition Hatches. 9290

 


Evolution Hatch Parts
Commonly requested replacement parts for a variety of Goiot Evolution Hatches are listed below. For parts not listed please contact us with measurements and details.
 

Handle Ass'y, Evolution Hatch - Left Complete: Goi HE-HLA:
Left side Gray plastic Handle Assembly includes Inside Handle and Top Cap with washers, O-ring and screw. Outside Handle, listed below, is Optional and replaces Top Cap. Used on Goiot Evolution series. 9494A

 

  Handle, Evolution Hatch - Left: Goi HE-HL:
Left side Gray plastic Inside Handle is 5 7/8" (150mm) long, Used on Goiot Evolution series. 9494

 

Handle Ass'y, Evolution Hatch - Right Complete: Goi HE-HRA:
Right side Gray plastic Handle Assembly includes Inside Handle and Top Cap with washers, O-ring and screw. Outside Handle, listed below, is Optional and replaces Top Cap. Used on Goiot Evolution series. 9495A

 

  Handle, Evolution - Right: Goi HE-HR:
Right side Gray plastic Inside Handle is 5 7/8" (150mm) long, Used on Goiot Evolution series. 9495

 

  Top Cap for Hatch Handle - Evolution, Cristal, Integration: Goi HE-TC:
  Top Cap for Hatch Handle fits on the outside of Hatch. Gray plastic Top Cap has square stud that mates with Handle socket. Unit is 40mm (1 5/8") OD x 44mm (1 3/4" long) and includes O-ring. Used on Goiot Evolution, Cristal, and Integration series.

 

   

 

O-ring for Top Cap - 4-pack: Goi HT-TC-OR4:
O-ring for Hatch Handle Top Cap / Outside Handle. Used on Goiot Tradition, Evolution, Cristal, and Integration series Hatches, O-rings are sold in packs of four (4) pieces.

 

 
  Outside Handle for Hatch - Evolution, Cristal, Integration: Goi HE-HOS:
  Optional Outside Handle allows opening Hatch from the outside. Gray plastic Handle replaces Top Cap and has square stud that mates with inside Handle. Unit is (maximum) 42mm (1 5/8") wide x 96mm (3 3/4") long and includes O-ring. Used on Goiot Evolution, Cristal, and Integration series. 101687

 

Stay Ass'y, Evolution Hatch: Goi HE-SA:
Gray plastic Stay Assembly allows Hatch support for ventilation. Includes 100mm (4") Stay Arm, Bracket and screw. Used on Goiot Evolution series.

 

 

 

Hinge Pin Ass'y (Friction Set) - Small Pair: Goi HC-AS-2:
Self-locking Hinge Pin Assembly (Friction Set) allows hinge friction to be increased by tightening the screw. Unit is 50mm long, and includes Special Allen Head Nut, polymer spacer, and 5mm x 35mm screw. Set (2 pcs.) is used on Smaller Goiot Cristal and Evolution Hatches, as well as Cristal and Evolution Ports. Fits Cristal Hatches # 24.19, 24.24, 35.21, 36.14, 36.19, 36.24, 49.19, & 49.24 and Evolution Hatches # 23.23 & 32.18. 101706

 

EP?

 

Hinge Pin Ass'y (Friction Set) - Large Pair: Goi HC-AL-2:
Self-locking Hinge Pin Assembly (Friction Set) allows hinge friction to be increased by tightening the screw. Polymer spacer is 43mm long x 16mm diameter, unit includes 6mm x 50mm screw, washers and Locknut. Set (2 pcs.) is used on Larger Goiot Cristal and Evolution Hatches. Fits Cristal Hatches # 42.42, 44.31, 44.44, 44C, & 49.36, and Evolution Hatches # 23.23 & 32.18.  101708

 

 

Cristal & Integration Hatch Parts
Commonly requested replacement parts for a variety of Goiot Cristal and Integration Hatches are listed below. For parts not listed please contact us with measurements and details.
 

Handle Ass'y Large, Cristal & Integration Hatch - Left Complete: Goi HC-HLA:
Left side Gray plastic Handle Assembly includes Inside Handle and Top Cap with washers, O-ring and screw. Outside Handle, listed below, is Optional and replaces Top Cap. Used on Goiot Cristal and Integration series.

 

  Handle Large, Cristal & Integration Hatch - Left: Goi HC-HL:
  Left side Gray plastic Inside Handle is 5 1/8" (130mm) long, Used on Goiot Cristal and Integration series.

 

 
Handle Ass'y Large, Cristal & Integration Hatch - Right Complete: Goi HC-HRA:
Right side Gray plastic Handle Assembly includes Inside Handle and Top Cap with washers, O-ring and screw. Outside Handle, listed below, is Optional and replaces Top Cap. Used on Goiot Cristal and Integration series.

 

  Handle Large, Cristal & Integration Hatch - Right: Goi HC-HR:
  Right side Gray plastic Inside Handle is 5 1/8" (130mm) long, Used on Goiot Cristal and Integration series.

 

 
  Inside Cap for Large Handle, Cristal & Integration: Goi HC-HC:
  Inside Cap for Large Handles. Gray plastic Cap is 42mm (1 5/8") diameter, Used on Goiot Cristal and Integration series.

 

  Top Cap for Hatch Handle - Evolution, Cristal, Integration: Goi HE-TC:
  Top Cap for Hatch Handle fits on the outside of Hatch. Gray plastic Top Cap has square stud that mates with Handle socket. Unit is 40mm (1 5/8") OD x 44mm (1 3/4" long) and includes O-ring. Used on Goiot Evolution, Cristal, and Integration series.

 

   

 

O-ring for Top Cap - 4-pack: Goi HT-TC-OR4:
O-ring for Hatch Handle Top Cap / Outside Handle. Used on Goiot Tradition, Evolution, Cristal, and Integration series Hatches, O-rings are sold in packs of four (4) pieces.

 

 
  Outside Handle for Evolution, Cristal, Integration Hatch: Goi HE-HOS:
  Optional Outside Handle allows opening Hatch from the outside. Gray plastic Handle replaces Top Cap and has square stud that mates with inside Handle. Unit is (maximum) 42mm (1 5/8") wide x 96mm (3 3/4") long and includes O-ring. Used on Goiot Evolution, Cristal, and Integration series.

 

Hinge Pin Ass'y (Friction Set) - Small Pair: Goi HC-AS-2:
Self-locking Hinge Pin Assembly (Friction Set) allows hinge friction to be increased by tightening the screw. Unit is 50mm long, and includes Special Allen Head Nut, polymer spacer, and 5mm x 35mm screw. Set (2 pcs.) is used on Goiot Cristal and Evolution Ports, and Smaller Cristal and Evolution Hatches. Fits Goiot Cristal Hatches # 24.19, 24.24, 35.21, 36.14, 36.19, 36.24, 49.19, & 49.24 and Evolution Hatches # 23.23 & 32.18. 101706

 

 

 

Hinge Pin Ass'y (Friction Set) - Large Pair: Goi HC-AL-2:
Self-locking Hinge Pin Assembly (Friction Set) allows hinge friction to be increased by tightening the screw. Polymer spacer is 43mm long x 16mm diameter, unit includes 6mm x 50mm screw, washers and Locknut. Set (2 pcs.) is used on Larger Goiot Cristal and Evolution Hatches. Fits Cristal Hatches # 42.42, 44.31, 44.44, 44C, & 49.36, and Evolution Hatches # 23.23 & 32.18.  101708

 

 

Opal Hatch Parts
Commonly requested replacement parts for a variety of Goiot Opal Hatches are listed below. For parts not listed please contact us with measurements and details.
 

Handle Set for Opal Hatch - Complete: Goi HO-HSC:
Gray plastic Handle Set for Opal Hatches includes Left and Right Inside Handles and Top Caps with washers, O-rings and screws. Handles only, listed below, are available separately.

 

 
  Handle, Opal Hatch - Left: Goi HO-HL:
Left side Gray plastic Inside Handle is 5 7/8" (150mm) long, Used on Goiot Opal series.

 

 
  Handle, Opal Hatch - Right: Goi HO-HR:
Right side Gray plastic Inside Handle is 5 7/8" (150mm) long, Used on Goiot Opal series.

 

 
Stay Arm for T10 Opal Hatch: Goi HO-SA-T10:
Stay Arm for T20 Opal Hatch: Goi HO-SA-T20:
Stay Arm for T30, T54 Opal Hatches: Goi HO-SA-T30:
Stay Arm for T40 Opal Hatch: Goi HO-SA-T40:
Stay Arm for T44. T60, T70 Opal Hatches: Goi HO-SA-T44:
Gray plastic Stay Assembly with Adjustable Aluminum Rod allows Hatch support for ventilation. Includes Stay Arm with quick release Fastpin and Aluminum Rod. Used on Goiot Opal series.

 


Replacement Gasket for Hatches 
Replacement Gasket for all Goiot Hatches are listed below.
 
Gasket Glue for Goiot Hatches & Ports: Goi PT-GGlue:
Special Gasket Glue is used for Gasket attachment on all Goiot Hatches and Ports. Enough Glue is included for re-gasketing 2 mid-size Hatches or 4-5 Ports.  gl 101714

 

 

Gasket for Small Original Goiot Cast Hatches: Goi PT-G8-___':
Black Neoprene Gasket is used on Goiot #114 (333mm x 188mm (13 1/8" x 7 3/8") glass size) and #115 (462mm x 333mm (18 1/8" x 13 1/8") glass size) original Cast Hatches with Stay Arm. Round profile Gasket is 8mm (5/16") OD, and is sold by the foot.  R8  95667 gl 101714

 

 
Gasket for Large Original Goiot Cast Hatches: Goi HT-GS-___':
Black Neoprene Gasket is used on Goiot #115.0 (527mm x 397mm (20 3/4" x 15 5/8") glass size) and larger original Cast Hatches with Stay Arm. Trapezoidal profile Gasket has 14mm wide Base, is 12mm wide at the top x 10mm high, and is sold by the foot.  T  95661 gl 101714

 

 

Gasket for Small Goiot Tradition Hatches: Goi HT-GS-___':
Black Neoprene Gasket is used on all Goiot Tradition Cast Hatches (including Tradition Escape and Sliding Hatches), except for the Two-way opening, and the Largest (835mm (32 7/8") square glass size) Cast Hatch. Trapezoidal profile Gasket has 14mm wide Base, is 12mm wide at the top x 10mm high, and is sold by the foot.  T  95661 gl 101714

 

 
Gasket for Large Goiot Tradition Hatches: Goi HT-GL-___':
Black Neoprene Gasket is only used on the Goiot Two-way opening, and the Largest Tradition Hatch, Goi HT80.80 (835mm (32 7/8") square glass size). Round profile Gasket is 10mm (3/8") OD, and is sold by the foot.  R10  95665 gl 101714

 

 

Gasket for Small Goiot Cristal Hatches: Goi HC-GS-___':
Black Neoprene Gasket is used on smaller Goiot Cristal Hatches (up to 357mm x 233mm (14" x 9 1/8") glass size). Round-top Gasket with flat bottom is 10mm wide x 10mm high, and is sold by the foot.  RT10  95658 gl 105697

 

 
Gasket for Large Goiot Cristal Hatches: Goi HC-GL-___':
Black Neoprene Gasket is only used on larger Goiot Cristal Hatches (390mm (15 3/8") square glass size, and larger) including Cristal Escape Hatches. Round-top Gasket with flat bottom is 12mm wide (with Base Lip) x 13mm high, and is sold by the foot.  RT12  95659 gl 105697

 

 

Gasket for Small Goiot Integration Hatches: Goi HI-GS-___':
Black Neoprene Gasket is used on smaller Goiot Integration Hatches (up to 250mm x 135mm (9 7/8" x 5 5/16") glass size). Round profile Gasket is 6mm (1/4") OD, and is sold by the foot.  R6  95666 gl 105697

 

 
Gasket for Large Goiot Integration Hatches: Goi HI-GL-___':
Black Neoprene Gasket is used on larger Goiot Integration Hatches (268mm x 248mm (10 1/2" x 9 3/4") glass size, and larger). Round profile Gasket is 8mm (5/16") OD, and is sold by the foot.  R8  95667 gl 105697

 

 

Gasket for Small Goiot Evolution Hatches: Goi HE-GS-___':
Black Neoprene Gasket is used on smaller Goiot Evolution Hatches (up to 341mm x 197mm (13 7/16" x 7 3/4") glass size). Round-top Gasket with flat bottom is 8mm wide x 7mm high, and is sold by the foot.  RT8   95663 gl 105697

 

 
Gasket for Large Goiot Evolution Hatches: Goi HE-GL-___':
Black Neoprene Gasket is used on larger Goiot Evolution Hatches (406mm (16") square glass size, and larger). Round-top Gasket with flat bottom is 12mm wide (with Base Lip) x 13mm high, and is sold by the foot.  RT12   95659 gl 105697

 

 

Gasket for Goiot Opal Hatches: Goi HO-G-___':
Black Neoprene Gasket is used on all Goiot Opal Hatches. Rounded triangular Gasket is (maximum) 13.6mm wide x 12mm high, and is sold by the foot.  RT13   106896

 

 

Fly (mosquito) Screens for Hatches 
Flyscreens or Mosquito Screens for most Goiot Hatches are available on special order.
Please contact us with measurements and details.
 

Replacement Glass (Acrylic) for Hatches 
Replacement Glass (Acrylic) Lenses for most Goiot Hatches are available on special order.
Please contact us with measurements and details.

~ Back to Goiot Main Page ~

~ Back to Hatches & Ports Main Page ~

~ Back to Hardware Main Page ~

~ Back to Rig-Rite Home Page ~