Spars, Rigging, and Hardware for Sailboats

Rig-Rite, Inc.
Phone: (001) 401-739-1140 -- FAX: (001) 401-739-1149
www.RigRite.com          Ordering/Questions

Stainless Steel Clevis Pins & Cotter Pins


Clevis Pins are primarily used to attach Turnbuckles and Rigging to Deck and to Mast, but are also used in a wide variety of other Rigging applications including Gooseneck, Spreader and Sail attachment, and as Sheave Axles. Clevis Pin diameter is equal to the size of the hole it is used in. Clevis Pins are held in place with Cotter Pins (Split Pins).
Clevis Pins are measured by Diameter and Grip Length (the maximum length between the Head and a Cotter Pin), a given Diameter is available in a variety of Grip lengths. While a longer than ideal length may be used in some applications, proper sizing keeps dangerous protrusions and weight to a minimum.
Rig-Rite stocks a large variety of Stainless Steel Clevis Pins - most are listed below, as are some Titanium Pins.
If you require a Clevis Pin not listed here,
please contact us specifying dimensions (OD and Grip Length), material (Stainless Steel, Bronze, Titanium, etc.), and application. If unavailable otherwise, we produce many Custom Clevis Pins and can quote them on a Custom basis.
See also: Metric Clevis Pins, Bronze Clevis Pins, Rigging Pins, Fastpins and Sheave Axle Pins.

clevis pin

Stainless Steel Clevis Pins
Pin Diameter Part # Dia. x Grip length* Common Usage  
3/16" CP3-09 3/16" x 9/32"    1/16", 3/32" Swage Jaw MS20667  $1.50
  CP3-13 3/16" x 13/32" 1/8" Swage Jaw MS20667-4  $1.50
  CP3-17 3/16" x 17/32"    
  CP3-24 3/16" x 3/4"         $1.50
  CP3-30 3/16" x 15/16"    $1.50
  CP3-32 3/16" x 1"           

1/4" CP4-13 1/4" x 13/32"     5/32" Swage Jaw MS20667-5  $2.00
  CP4-16 1/4" x 1/2"         Shroud Tangs  $1.50
  CP4-18M 1/4" x 9/16"         Bronze Turnbuckle  $1.50
  CP4-19 1/4" x 19/32"        
  CP4-20 1/4" x 5/8"            $1.50
  CP4-24 1/4" x 3/4"            $1.50
  CP4-26 1/4" x 13/16"       Kenyon Masthead  
  CP4-28 1/4" x 7/8"            $1.50
  CP4-32 1/4" x 1"               $1.50
  CP4-34 1/4" x 1 1/16"       
  CP4-36 1/4" x 1 1/8"         $1.50
  CP4-40 1/4" x 1 1/4"         $1.50
  CP4-44 1/4" x 1 3/8"         
  CP4-48 1/4" x 1 1/2"         $2.00
  CP4-61 1/4" x 1 29/32"   Kenyon Gooseneck  $12.00
  CP4-76 1/4" x 2 3/8"        Kenyon Gooseneck  $9.00

5/16" CP5-18 5/16" x 9/16"     3/16" Swage Jaw MS20667-6  $3.00
  CP5-22 5/16" x 11/16"   7/32" Swage Jaw MS20667-7  $3.00
  CP5-23M 5/16" x 23/32"     Bronze Turnbuckle  $4.00
  CP5-24 5/16" x 3/4"          
  CP5-26 5/16" x 13/16"     Kenyon Masthead  
  CP5-28 5/16" x 7/8"          
  CP5-29 5/16" x 29/32"      
  CP5-32 5/16" x 1"             $3.00
  CP5-36 5/16" x 1 1/8"   Cinkel Spreader Base  $3.00
  CP5-40 5/16" x 1 1/4"      $3.00
  CP5-44 5/16" x 1 3/8"      
  CP5-48 5/16" x 1 1/2"      $3.00
  CP5-61 5/16" x 1 29/32"      

3/8" CP6-20 3/8" x 5/8"       Shroud Tangs  
  CP6-22 3/8" x 11/16"     $3.00
  CP6-24M 3/8" x 3/4"        SS Turnbuckle  
  CP6-26 3/8" x 13/16"  1/4" Swage Jaw MS20667-8  $3.00
  CP6-28M 3/8" x 7/8"        Bronze Turnbuckle  
  CP6-30 3/8" x 15/16"    
  CP6-32 3/8" x 1"           $5.00
  CP6-37 3/8" x 1 5/32"        
  CP6-40 3/8" x 1 1/4"          $5.00
  CP6-42 3/8" x 1 5/16"      Cinkel Spreader Base  
  CP6-44 3/8" x 1 3/8"          
  CP6-46 3/8" x 1 7/16"        
  CP6-48 3/8" x 1 1/2"          $5.00
  CP6-50 3/8" x 1 9/16"         
  CP6-52 3/8" x 1 5/8"         
  CP6-54 3/8" x 1 11/16"  Spreader Base  
  CP6-60 3/8" x 1 7/8"      Spreader Base  
  CP6-70 3/8" x 2 3/16"      
  CP6-76 3/8" x 2 3/8" Kenyon Gooseneck  
  CP6-96 3/8" x 3"    

7/16" CP7-24M 7/16" x 3/4"       SS Turnbuckle, Shroud Tangs  $5.00
  CP7-26 7/16" x 13/16"    $7.00
  CP7-28 7/16" x 7/8"     9/32", 5/16" Swage Jaw MS20667  $7.00
  CP7-29 7/16" x 29/32" Bronze Turnbuckle  $5.00
  CP7-32 7/16" x 1"    $5.00

1/2" CP8-24 1/2" x 3/4"   Shroud Tangs  $7.00
  CP8-28 1/2" x 7/8"  SS Turnbuckle  $5.00
  CP8-32 1/2" x 1"     3/8" Swage Jaw MS20667-12  $5.00
  CP8-35 1/2" x 1 3/32"    Bronze Turnbuckle  
  CP8-42 1/2" x 1 5/16"     Cinkel Spreader Base  
  CP8-42T 1/2" x 1 5/16"      Navtec Titanium Pin  
  CP8-44 1/2" x 1 3/8"          
  CP8-48 1/2" x 1 1/2"          $7.00
  CP8-54 1/2" x 1 11/16"      
  CP8-74 1/2" x 2 5/16"  Gudgeon Pin  
  CP8-80 1/2" x 2 1/2"     Gooseneck Slide  
  CP8-104 1/2" x 3 1/4"    
  CP8-108 1/2" x 3 3/8"  Gooseneck Slide  
  CP8-128 1/2" x 4"    
  CP8-140 1/2" x 4 3/8" Kenyon Gooseneck  

9/16" CP9-34 9/16" x 1 1/16"    Navtec Turnbuckle  
  CP9-42 9/16" x 1 5/16"       
  CP9-48 9/16" x 1 1/2"       Hood  
  CP9-52 9/16" x 1 5/8"         

5/8" CP10-30 5/8" x 15/16"     Shroud Tangs  $12.00
  CP10-34 5/8" x 1 1/16"    SS Turnbuckle  $12.00
  CP10-35M 5/8" x 1 3/32"     Bronze Turnbuckle  $10.00
  CP10-36 5/8" x 1 1/8"      SS Turnbuckle  $9.00
  CP10-40 5/8" x 1 1/4"         $9.00
  CP10-42 5/8" x 1 5/16"        
  CP10-44 5/8" x 1 3/8"         
  CP10-44T 5/8" x 1 3/8"       Navtec Titanium Pin  
  CP10-46 5/8" x 1 7/16"       
  CP10-48 5/8" x 1 1/2"        
  CP10-50 5/8" x 1 9/16"      
  CP10-54 5/8" x 1 11/16"     
  CP10-65 5/8" x 2 1/16"      
  CP10-140 5/8" x 4 3/8"  Kenyon Gooseneck  

3/4" CP12-42 3/4" x 1 5/16"     Shroud Tangs  $20.00
  CP12-44 3/4" x 1 3/8"   Navtec Special  
  CP12-50M 3/4" x 1 9/16"  Bronze Turnbuckle  $20.00
  CP12-60 3/4" x 1 7/8"    3/8" Swage Jaw MS20667-12  $26.00
  CP12-64 3/4" x 2"   Navtec  $42.00
  CP12-64T 3/4" x 2"   Navtec Titanium Pin  
  CP12-72 3/4" x 2 1/4"   Navtec HS 3  
  CP12-74 3/4" x 2 5/16"   Navtec HS  
  CP12-104 3/4" x 3 1/4"  ks  
  CP12-132G 3/4" x 4 1/8"   Navtec Gamma Pin  
  CP12-132T 3/4" x 4 1/8"   Navtec Titanium Pin  

7/8" CP14-56 7/8" x 1 3/4"     $20.00
  CP14-56G 7/8" x 1 3/4"   Navtec Gamma Pin  
  CP14-58 7/8" x 1 13/16"     $20.00
  CP14-60 7/8" x 1 7/8"  Bronze Turnbuckle  $26.00
  CP14-90 7/8" x 2 13/16"   Navtec Special  

1" CP16-50 1" x 1 9/16"  Navtec Special  
  CP16-55 1" x 1 23/32"  Navtec Special  
  CP16-58 1" x 1 13/16"  Navtec  
  CP16-60 1" x 1 7/8"    $35.00
  CP16-62 1" x 1 15/16"   Navtec  
  CP16-68 1" x 2 1/8"  Bronze Turnbuckle, Navtec  $48.00

1 1/8" CP18-72T 1 1/8" x 2 1/4"  Navtec Titanium Pin  
  CP18-74 1 1/8" x 2 5/16"  Navtec  

1 1/4" CP20-76 1 1/4" x 2 3/8"  Navtec  
  CP20-90T 1 1/4" x 2 13/16"  Navtec Titanium Pin  

1 1/2" CP24-98G 1 1/2" x 3 1/16"  Navtec Gamma Pin 6  

1 3/4" CP28-107 1 3/4" x 3 5/16"  Navtec  
  CP28-122 1 3/4" x 3 13/16"  Navtec D600-28-375  

5/32"
Stainless Steel Cotter Pins
Cotter Pins are most commonly used to secure a Clevis Pin. Cotter Pins listed here are designed with one prong slightly longer than the other so they're easy to open. Sizes in Bold are those most commonly used.
Diameter Dia. x Length* Common Usage Part #
- 12 pcs
Part #
- 100 pcs
 Price
1/16" 1/16" x 3/8" 3/16" & 1/4" Pins C2-1-12P    $4.00
        C2-1-100P  
  1/16" x 1/2" 3/16" & 1/4" Pins C2-2-12P    $4.00
        C2-2-100P  $20.00
  1/16" x 3/4"   C2-3-12P    $5.00
        C2-3-100P  

3/32" 3/32" x 1/2" 5/16" & 3/8" Pins C3-2-12P    
        C3-2-100P  
  3/32" x 3/4" 5/16" & 3/8" Pins C3-3-12P    $8.00
        C3-3-100P  $39.00
  3/32" x 1 1/4"   C3-5-12P    $10.00
        C3-5-100P  
  3/32" x 1 1/2"   C3-6-12P    $12.00
        C3-6-100P  

1/8" 1/8" x 1/2"   C4-2-12P   $10.00
        C4-2-100P  
  1/8" x 3/4" 7/16" & 1/2" Pins C4-3-12P   $11.00
        C4-3-100P  
  1/8" x 1" 7/16" & 1/2" Pins C4-4-12P   $12.00
        C4-4-100P  $59.00
  1/8" x 1 3/4"   C4-7-12P   $24.00
        C4-7-100P  
  1/8" x 2 1/2"   C4-10-12P   $29.00
        C4-10-100P  

5/32" x 1" 5/8" Pins C5-4-12P   $19.00
        C5-4-100P  $89.00
  5/32" x 1 1/2" 3sp; C5-6-12P   $29.00
        C5-6-100P  
           

3/16" 3/16" x 1" 3/4" Pins C6-4-12P   $32.00
        C6-4-100P  
  3/16" x 1 1/4" 3/4", 7/8", 1" Pins C6-5-12P   $35.00
        C6-5-100P  $169.00
  3/16" x 2"   C6-8-12P    $39.00
        C6-8-100P  
  3/16" x 3"   C6-12-12P    $45.00
        C6-12-100P  

1/4" 1/4" x 3/4"   C8-3-12P    $42.00
  1/4" x 1"   C8-4-12P    $45.00
  1/4" x 2" 1 1/8" - 1 1/2" Pins C8-8-12P    $49.00
  1/4" x 2 1/2" 1 1/2" - 1 7/8" Pins C8-10-12P    $52.00
  1/4" x 3 1/2"   C8-14-12P    $55.00

3/8" 3/8" x 2 1/2" 2" Pins C8-3-12P    $69.00

1/2" 1/2" x 3"   C8-3-12P    $129.00

~ Back to Hardware Main Page ~

~ Back to Rig-Rite Home Page ~