 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Specialty Cleats |
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Specialty Cleats |
|
| Specialty Cleats | |
| A variety of Cleats for Special Applications are available.
If you require Cleats not listed, please forward a sketch or photo of your Cleat with measurements, hole spacing (to centers), full details of the part, boat model and year. See also: Cleats Main Page. |
|
| Downhaul Cleats Shroud Cleats |
|
| Downhaul Cleats | |
| Downhaul Cleat Assembly - 3 1/4" long, Black: K-1108: Downhaul Cleat Assembly - 3 1/4" long, Silver: K-1108S: Aluminum Downhaul Cleat mounts in luff groove of Mast Sections with 1/2" Boltrope Groove. Unit consists of K-1617 (or K-1617S) 3 1/4" Cleat mounted on a 6" length of 1/2" OD anodized Aluminum tube. Tube slides into luff groove, screws are tightened to lock Cleat in desired position. Extra long tube with off-center cleat prevents Gooseneck Slide from hitting Cleat.
|
|
| Downhaul Cleat Assembly - 4" long, Black: K-1414: Aluminum Downhaul Cleat mounts in luff groove of Mast Sections with 1/2" Boltrope Groove. Unit consists of K-10324 4" Spar Cleat mounted on a 6" length of 1/2" OD anodized Aluminum tube. Tube slides into luff groove, screws are tightened to lock Cleat in desired position. Extra long tube with off-center cleat prevents Gooseneck Slide from hitting Cleat.
|
|
| Shroud Cleats | |
| SS Shroud-Mount Cleat Assembly - 4 1/2" long: Jon 40-518: Unique SS Shroud Cleat attaches to Wire or Rod rigging from 5/32" to 3/8" diameter with SS U-bolt. Stamped SS Cleat is 4 1/2" long x (maximum) 1" wide with a 5/8" hole on one end for attachment of shackles or line. Ideal for flag halyards, radar reflectors, etc.. $18. |
|