 |
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Deck Cleats |
|
|
Spars, Rigging, and Hardware for SailboatsRig-Rite, Inc. |
Deck Cleats |
|
| Deck Cleats | |
| Cleats are used to tie off a line (halyards, reef lines, etc.),
wherever needed. Deck Cleats are designed for attachment to the Deck or other flat surface, generally
having both a wide base attaching with 4 screws, and a hole in the base so a spliced eye
can be run through it and slipped over the Cleat. Rig-Rite stocks a large selection of Deck Cleats. Common varieties are listed below. The most economical Deck Cleats are indicated by an * after the Part Number, and are recommended for new installations. Other, more expensive, Deck Cleats are listed for special requirements and applications where hole spacing is critical. If you require Deck Cleats not listed, please forward a sketch or photo of your Cleat
with measurements, hole spacing (to centers), full details of the part, boat model and year.
See also: Cleats Main Page. |
|
| 4" Deck Cleats 5" Deck Cleats 5 1/2" Deck Cleats 6" Deck Cleats 7" Deck Cleats 8" Deck Cleats 10" Deck Cleats 12" Deck Cleats 16" Deck Cleats |
|
| 4" Deck Cleats | |
| Deck Cleat - 4" long, Black: Sch 70-04X: Cast Aluminum Deck Cleat is a low-profile design for use with line up to 3/8" diameter. Black epoxy coated Cleat is 4" long, and fastens to Deck with (4) 3/16" (#10) FH screws on 1" (fore and aft) x 1 1/16" (athwartships) hole centers. - Limited Availability.
|
|
| 5" Deck Cleats | |
| Deck Cleat - 5" long, Black: Sch 70-05X: Cast Aluminum Deck Cleat is a low-profile design with a narrow base suitable for use with line up to 3/8" diameter. Black epoxy coated Cleat is 5" long, and fastens to Deck with (4) 7/32" (#12) FH screws on 1 1/4" (fore and aft) x 1 3/8" (athwartships) hole centers. - Limited Availability.
|
|
| 5 1/2" Deck Cleats | |
| Deck Cleat - 5 1/2" long, Black: Spartan SP-C191AXB: Cast Aluminum Deck Cleat is a low-profile design suitable for use with line up to 7/16" diameter. Black epoxy coated Cleat is 5 1/2" long, and fastens to Deck with (4) 1/4" FH screws on 1 1/2" (fore and aft) x 1 3/4" (athwartships) hole centers. Special as used by Cape Dory Yachts. - Limited Availability. D
|
|
| 6" Deck Cleats | |
|
Deck Cleat - 6" long, Black: Sch 70-06*: Deck Cleat - 6" long, Silver: Sch 60-06: Cast Aluminum Deck Cleat is a low-profile design for use with line up to 1/2" diameter. Anodized Cleat is 6" long, and fastens to Deck with (4) 1/4" FH screws on 1 1/2" (fore and aft) x 1 3/4" (athwartships) hole centers. $55.
|
 |
|
Deck Cleat - 6" long, Silver: WC 14051-6C: Original Wilcox-Crittenden Cast Marinium Deck Cleat is a low-profile design for use with line up to 7/16" diameter. Cleat is 6" long x (maximum) 2 1/2" wide, and fastens to Deck with (4) 1/4" FH screws on 1 1/2" (fore and aft) x 1 13/16" (athwartships) hole centers. H As used on hundreds of different Sail and Power Boats. - Limited Availability.
|
 |
| 7" Deck Cleats | |
|
Deck Cleat - 7" long, Silver: WC 14051-7C: Original Wilcox-Crittenden Cast Marinium Deck Cleat is a low-profile design with a narrow base suitable for use with line up to 1/2" diameter. Cleat is 7" long x (maximum) 2 7/8" wide, and fastens to Deck with (4) 5/16" FH screws on 1 3/4" (fore and aft) x 2" (athwartships) hole centers. H As used on hundreds of different Sail and Power Boats. - Limited Availability.
|
|
|
Deck Cleat - 7" long, Silver: PF 60-07CXG: Highly polished Aluminum Deck Cleat is a low-profile design suitable for use with line up to 5/8" diameter. Cleat is 7" long x (maximum) 2 5/8" wide, and fastens to Deck with (4) 1/4" FH screws on 1 11/16" (fore and aft) x 1 7/8" (athwartships) hole centers. Made in Germany.
|
|
| 8" Deck Cleats | |
|
Deck Cleat - 8" long, Black: Sch 70-08: Deck Cleat - 8" long, Silver: Sch 60-08:* Cast Aluminum Deck Cleat is a low-profile design for use with line up to 3/4" diameter. Anodized Cleat is 8" long, and fastens to Deck with (4) 5/16" FH screws on 2" (fore and aft) x 2" (athwartships) hole centers. $86/57.
|
|
| 10" Deck Cleats | |
|
Deck Cleat - 10" long, Black: Sch 70-10: Deck Cleat - 10" long, Silver: Sch 60-10:* Cast Aluminum Deck Cleat is a low-profile design for use with line up to 7/8" diameter. Anodized Cleat is 10" long, and fastens to Deck with (4) 3/8" FH screws on 2 1/2" (fore and aft) x 2 1/2" (athwartships) hole centers. $149/129
|
|
|
Deck Cleat - 10" long, Silver: Vas CL4-10C: Highly polished Aluminum Deck Cleat is a low-profile design suitable for use with line up to 3/4" diameter. Cleat is 10" long x (maximum) 3 3/4" wide, and fastens to Deck with (4) 1/4" FH screws on 2 7/8" (fore and aft) x 2 1/2" (athwartships) hole centers. Made in Holland by Vassen. - Limited Availability.
| |
| 12" Deck Cleats | |
|
Deck Cleat - 12" long, Silver: WC 14051-12C: Original Wilcox-Crittenden Cast Marinium Deck Cleat is a low-profile design suitable for use with line up to 7/8" diameter. Cleat is 12" long x (maximum) 4 1/8" wide, and fastens to Deck with (4) 3/8" FH screws on 2 1/2" (fore and aft) x 3" (athwartships) hole centers. - Limited Availability.
| |
|
Deck Cleat - 12" long, Silver: Vas CL4-12C: Highly polished Aluminum Deck Cleat is a low-profile design suitable for use with line up to 7/8" diameter. Cleat is 12" long x (maximum) 4 1/2" wide, and fastens to Deck with (4) 8mm (5/16") FH screws on 3 3/8" (fore and aft) x 3" (athwartships) hole centers. Made in Holland by Vassen. - Limited Availability.
| |
| 16" Deck Cleats | |
|
Deck Cleat - 16" long, Silver: Vas CL4-16C: Highly polished Aluminum Deck Cleat is a low-profile design suitable for use with line up to 7/8" diameter. Cleat is 16" long x (maximum) 5 5/8" wide, and fastens to Deck with (4) 10mm (3/8") FH screws on 4 3/8" (fore and aft) x 3 7/8" (athwartships) hole centers. Made in Holland by Vassen. - Limited Availability. | |