Chainplate Covers

Chainplate Covers
Chainplate Covers are designed for use with Standard Chainplates made from rectangular bar or plate stock which protrude through the deck. Chainplate Covers fit over the Chainplate and are fastened to the deck to help protect against water intrusion as well as helping to restrict lateral movement. Most Chainplate Covers are made from Stainless Steel plate, are rectangular in shape, and fasten to the deck with 2 or 4 screws. Formed Chainplate Covers are flared, or pushed up, around the slot where the Chainplate goes through to accommodate a greater amount of caulking underneath the Cover, and therefore a better seal. Chainplate Covers are listed below by the size of the Chainplates they fit.

*Cover Plate w/ Guy hook for 3/4" x 1/16" Chainplate: Ken K-234:* Special Cover Plate incorporates a smooth formed hook for use with Spinnaker Guys on dinghies. For use with Chainplates made from 3/4" wide stock that is 1/16" thick. Formed Stainless Steel Chainplate Cover is 2 1/4" long x (maximum) 1 5/8" wide (7/8" wide at base) x 1" high x 1/16" (.072") thick, with slot 3/4" x 1/16". Attaches to deck with (2) #10 (3/16") screws on 1 5/8" centers.
*Cover Plate for 3/4" wide x 3/32" Chainplate: Ken K-233:* Cover Plate for Chainplates made from 3/4" wide stock up to 3/32" thick. Stainless Steel Chainplate Cover is 2" long x 3/4" wide x 1/16" (.062") thick, with slot 13/16" x 3/32", and attaches to deck with (2) #10 (3/16") screws on 1 1/2" centers.
*Cover Plat for 3/4" wide x 3/16" Chainplate: Ken K-233C:* Cover Plate for Chainplates made from 3/4" wide stock up to 3/16" thick. Stainless Steel Chainplate Cover is 2" long x 3/4" wide x 1/16" (.062") thick, with slot 13/16" x 7/32", and attaches to deck with (2) #10 (3/16") screws on 1 1/2" centers. * XXM

*Small Cover Plate for 1" wide x 1/8" Chainplate: Sch CP 84-06S:* Cover Plate for CP 84-86 and other Chainplates made from 1" wide stock up to 1/8" thick. Stainless Steel Chainplate Cover is 2 1/4" long x 3/4" wide x 1/16" (.072") thick, with slot 1 1/32" x 1/8", and attaches to deck with (2) #10 (3/16") screws on 1 7/16" centers. #r sc2/3
*Cover Plate for 1" wide x 1/8" Chainplate: Sch CP 84-06:* Cover Plate for CP 84-86 and other Chainplates made from 1" wide stock up to 5/32" thick. Stainless Steel Chainplate Cover is 2 5/8" long x 3/4" wide x 1/16" (.072") thick, with slot 1 1/32" x 5/32", and attaches to deck with (2) #8 (5/32") screws on 1 7/8" centers.
*Formed Cover Plate for 1" wide x 1/8" Chainplate: Sch CP 84-69:* Cover Plate for CP 84-86 and other Chainplates made from 1" wide stock up to 5/32" thick. Formed Stainless Steel Chainplate Cover is 2 1/8" long x 1 5/16" wide x 1/16" (.072") thick, with slot 1 1/32" x 5/32", and attaches to deck with (4) #8 (5/32") screws on 1 5/8" and 13/16" centers.
*Cover Plate w/ Guy hook for 1" x 1/8" Chainplate: Ken K-234A:* Special Cover Plate incorporates a smooth formed hook for use with Spinnaker Guys on smaller boats. For use with CP 84-86 and other Chainplates made from 1" wide stock up to 5/32" thick. Formed Stainless Steel Chainplate Cover is 2 1/4" long x (maximum) 1 5/8" wide (7/8" wide at base) x 1" high x 1/16" (.072") thick, with slot 1 1/32" x 5/32". Attaches to deck with (2) #10 (3/16") screws on 1 5/8" centers.

*Formed Cover Plate for 1 1/4" x 1/8" Chainplate: Sch CP 84-54:* Cover Plate for CP 84-88 and other Chainplates made from 1 1/4" wide stock up to 5/32" thick. Formed Stainless Steel Chainplate Cover is 2 9/16" long x 1 5/16" wide x 1/16" (.072") thick, with slot 1 9/32" x 5/32", and attaches to deck with (4) #8 (5/32") screws on 2 1/16" and 13/16" centers.
*Cover Plate for 1 1/4" wide x 3/16" Chainplate: Ken K-233A:* Cover Plate for Chainplates made from 1 1/4" wide stock up to 7/32" thick. Stainless Steel Chainplate Cover is 2 3/4" long x 3/4" wide x 1/16" (.062") thick, with slot 1 9/32" x 7/32", and attaches to deck with (2) #10 (3/16") FH screws on 2 1/16" centers.
*Cover Plate for 1 1/4" wide x 1/4" Chainplate: CP 84-41M:* Heavy Cover Plate for Chainplates made from 1 1/4" wide stock up to 1/4" thick. Stainless Steel Chainplate Cover is 2 1/2" long x 1 3/8" wide x 1/8" (.120") thick, with slot 1 1/4" x 1/4", and attaches to deck with (4) #10 (3/16") screws on 2" and 7/8" centers. *

*Small Cover Plate for 1 1/2" wide x 1/8" Chainplate: Ken K-1037S:* Cover Plate for Chainplates made from 1 1/2" wide stock up to 1/8" thick. Stainless Steel Chainplate Cover is 3" long x 3/4" wide x 1/16" (.062") thick, with slot 1 1/2" x 1/8", and attaches to deck with (2) #10 (3/16") screws on 2 3/16" centers. #r sc4
*Cover Plate for 1 1/2" wide x 1/8" Chainplate: Ken K-1037:* Cover Plate for Chainplates made from 1 1/2" wide stock up to 5/32" thick. Stainless Steel Chainplate Cover is 3 1/4" long x 3/4" wide x 1/16" (.062") thick, with slot 1 9/16" x 5/32", and attaches to deck with (2) #8 (5/32") screws on 2 1/2" centers.
*Formed Cover Plate for 1 1/2" x 1/4" Chainplate: Sch CP 84-56:* Cover Plate for CP 84-90 and other Chainplates made from 1 1/2" wide stock up to 9/32" thick. Formed Stainless Steel Chainplate Cover is 2 9/16" long x 1 5/16" wide x 1/16" (.072") thick, with slot 1 9/16" x 9/32", and attaches to deck with (4) #8 (5/32") screws on 2 1/16" and 13/16" centers.
*Formed Cover Plate for 1 1/2" x 3/8" Chainplate: Sch CP 84-57:* Cover Plate for CP 84-91 and other Chainplates made from 1 1/2" wide stock up to 13/32" thick. Formed Stainless Steel Chainplate Cover is 2 9/16" long x 1 5/16" wide x 1/16" (.072") thick, with slot 1 17/32" x 13/32", and attaches to deck with (4) #8 (5/32") screws on 2 1/16" and 13/16" centers.

*Cover Plate for 2 1/4" x 1/4" Chainplate: CP 84-44M:* Heavy Cover Plate for Chainplates made from 2 1/4" wide stock up to 1/4" thick. Stainless Steel Chainplate Cover is 3" long x 1 1/2" wide x 1/8" (.120") thick, with slot 2 1/4" x 1/4", and attaches to deck with (4) #10 (3/16") screws on 2 1/2" and 1" centers.
*Cover Plate for 2 1/4" x 5/16" Chainplate: CP 84-45M:* Heavy Cover Plate for Chainplates made from 2 1/4" wide stock up to 5/16" thick. Stainless Steel Chainplate Cover is 3" long x 1 3/4" wide x 1/8" (.120") thick, with slot 2 1/4" x 5/16", and attaches to deck with (4) #10 (3/16") screws on 2 1/2" and 1 1/4" centers.
*Cover Plate for 2 1/4" x 7/16" Chainplate: CP 84-47M:* Heavy Cover Plate for Chainplates made from 2 1/4" wide stock up to 7/16" thick. Stainless Steel Chainplate Cover is 3" long x 2" wide x 1/8" (.120") thick, with slot 2 1/4" x 7/16", and attaches to deck with (4) #10 (3/16") screws on 2 1/2" and 1 1/2" centers.
*Cover Plate for 2 1/4" x 1/2" Chainplate: CP 84-48M:* Heavy Cover Plate for Chainplates made from 2 1/4" wide stock up to 1/2" thick. Stainless Steel Chainplate Cover is 3" long x 2" wide x 1/8" (.120") thick, with slot 2 1/4" x 1/2", and attaches to deck with (4) #10 (3/16") screws on 2 1/2" and 1 1/2" centers.

*Formed Cover Plate for 2 3/8" x 3/16" Chainplate: Sch CP 84-53X:* Cover Plate for Chainplates made from 2 3/8" wide stock up to 7/32" thick. Formed Stainless Steel Chainplate Cover is 3 7/16" long x 1 5/16" wide x 1/16" (.072") thick, with slot 2 7/16" x 7/32", and attaches to deck with (4) #8 (5/32") screws on 2 15/16" and 13/16" centers. *

*Cover Plate for 2 1/2" wide x 3/16" Chainplate: CP 84-272-1CP:* Cover Plate for CP 84-272-1, and other Chainplates made from 2 1/2" x 3/16" stock. Stainless Steel Chainplate Cover is 3 1/2" long x 1 9/16" wide x 3/32" thick, with slot 2 5/8" x 7/32", and attaches to deck with (4) #10 (3/16") screws on 2 1/8" and 15/16" centers. As used on O'Day 272.
*Cover Plate for 2 1/2" x 3/8" Chainplate: CP 84-49M:* Heavy Cover Plate for Chainplates made from 2 1/2" wide stock up to 3/8" thick. Stainless Steel Chainplate Cover is 4" long x 2 3/8" wide x 3/16" thick, with slot 2 1/2" x 3/8", and attaches to deck with (4) #10 (3/16") screws on 3 3/8" and 1 3/4" centers.
*Formed Cover Plate for 2 1/2" x 1/2" Chainplate: Sch CP 84-X2:* Cover Plate for Chainplates made from 2 1/2" wide stock up to 1/2" thick. Formed Stainless Steel Chainplate Cover is 4 1/2" long x 2" wide x 1/16" (.072") thick, with slot 2 5/8" x 1/2", and attaches to deck with (4) #10 (3/16") screws on 4" and 1 1/2" centers.
*Cover Plate for 2 1/2" x 5/8" Chainplate: CP 84-51M:* Heavy Cover Plate for Chainplates made from 2 1/2" wide stock up to 5/8" thick. Stainless Steel Chainplate Cover is 4" long x 2 3/8" wide x 3/16" thick, with slot 2 1/2" x 3/8", and attaches to deck with (4) #10 (3/16") screws on 3 3/8" and 1 3/4" centers.

Spars, Rigging, and Hardware for Sailboats